The Open Group Base Specifications Issue 6
IEEE Std 1003.1, 2003 Edition
Copyright © 2001-2003 The IEEE and The Open Group, All Rights reserved.

NAME

stdint.h - integer types

SYNOPSIS

#include <stdint.h>

DESCRIPTION

[CX] [Option Start] Some of the functionality described on this reference page extends the ISO C standard. Applications shall define the appropriate feature test macro (see the System Interfaces volume of IEEE Std 1003.1-2001, Section 2.2, The Compilation Environment) to enable the visibility of these symbols in this header. [Option End]

The <stdint.h> header shall declare sets of integer types having specified widths, and shall define corresponding sets of macros. It shall also define macros that specify limits of integer types corresponding to types defined in other standard headers.

Note:
The "width" of an integer type is the number of bits used to store its value in a pure binary system; the actual type may use more bits than that (for example, a 28-bit type could be stored in 32 bits of actual storage). An N-bit signed type has values in the range -2N-1 or 1-2N-1 to 2N-1-1, while an N-bit unsigned type has values in the range 0 to 2N-1.

Types are defined in the following categories:

(Some of these types may denote the same type.)

Corresponding macros specify limits of the declared types and construct suitable constants.

For each type described herein that the implementation provides, the <stdint.h> header shall declare that typedef name and define the associated macros. Conversely, for each type described herein that the implementation does not provide, the <stdint.h> header shall not declare that typedef name, nor shall it define the associated macros. An implementation shall provide those types described as required, but need not provide any of the others (described as optional).

Integer Types

When typedef names differing only in the absence or presence of the initial u are defined, they shall denote corresponding signed and unsigned types as described in the ISO/IEC 9899:1999 standard, Section 6.2.5; an implementation providing one of these corresponding types shall also provide the other.

In the following descriptions, the symbol N represents an unsigned decimal integer with no leading zeros (for example, 8 or 24, but not 04 or 048).

Note:
Applications can test for optional types by using the corresponding limit macro from Limits of Specified-Width Integer Types .
Limits of Specified-Width Integer Types

The following macros specify the minimum and maximum limits of the types declared in the <stdint.h> header. Each macro name corresponds to a similar type name in Integer Types .

Each instance of any defined macro shall be replaced by a constant expression suitable for use in #if preprocessing directives, and this expression shall have the same type as would an expression that is an object of the corresponding type converted according to the integer promotions. Its implementation-defined value shall be equal to or greater in magnitude (absolute value) than the corresponding value given below, with the same sign, except where stated to be exactly the given value.

Limits of Other Integer Types

The following macros specify the minimum and maximum limits of integer types corresponding to types defined in other standard headers.

Each instance of these macros shall be replaced by a constant expression suitable for use in #if preprocessing directives, and this expression shall have the same type as would an expression that is an object of the corresponding type converted according to the integer promotions. Its implementation-defined value shall be equal to or greater in magnitude (absolute value) than the corresponding value given below, with the same sign.

If sig_atomic_t (see the <signal.h> header) is defined as a signed integer type, the value of {SIG_ATOMIC_MIN} shall be no greater than -127 and the value of {SIG_ATOMIC_MAX} shall be no less than 127; otherwise, sig_atomic_t shall be defined as an unsigned integer type, and the value of {SIG_ATOMIC_MIN} shall be 0 and the value of {SIG_ATOMIC_MAX} shall be no less than 255.

If wchar_t (see the <stddef.h> header) is defined as a signed integer type, the value of {WCHAR_MIN} shall be no greater than -127 and the value of {WCHAR_MAX} shall be no less than 127; otherwise, wchar_t shall be defined as an unsigned integer type, and the value of {WCHAR_MIN} shall be 0 and the value of {WCHAR_MAX} shall be no less than 255.

If wint_t (see the <wchar.h> header) is defined as a signed integer type, the value of {WINT_MIN} shall be no greater than -32767 and the value of {WINT_MAX} shall be no less than 32767; otherwise, wint_t shall be defined as an unsigned integer type, and the value of {WINT_MIN} shall be 0 and the value of {WINT_MAX} shall be no less than 65535.

Macros for Integer Constant Expressions

The following macros expand to integer constant expressions suitable for initializing objects that have integer types corresponding to types defined in the <stdint.h> header. Each macro name corresponds to a similar type name listed under Minimum-width integer types and Greatest-width integer types.

Each invocation of one of these macros shall expand to an integer constant expression suitable for use in #if preprocessing directives. The type of the expression shall have the same type as would an expression that is an object of the corresponding type converted according to the integer promotions. The value of the expression shall be that of the argument.

The argument in any instance of these macros shall be a decimal, octal, or hexadecimal constant with a value that does not exceed the limits for the corresponding type.


The following sections are informative.

APPLICATION USAGE

None.

RATIONALE

The <stdint.h> header is a subset of the <inttypes.h> header more suitable for use in freestanding environments, which might not support the formatted I/O functions. In some environments, if the formatted conversion support is not wanted, using this header instead of the <inttypes.h> header avoids defining such a large number of macros.

As a consequence of adding int8_t, the following are true:

FUTURE DIRECTIONS

typedef names beginning with int or uint and ending with _t may be added to the types defined in the <stdint.h> header. Macro names beginning with INT or UINT and ending with _MAX, _MIN, or _C may be added to the macros defined in the <stdint.h> header.

SEE ALSO

<inttypes.h> , <signal.h> , <stddef.h> , <wchar.h>

CHANGE HISTORY

First released in Issue 6. Included for alignment with the ISO/IEC 9899:1999 standard.

ISO/IEC 9899:1999 standard, Technical Corrigendum No. 1 is incorporated.

End of informative text.


UNIX ® is a registered Trademark of The Open Group.
POSIX ® is a registered Trademark of The IEEE.
[ Main Index | XBD | XCU | XSH | XRAT ]