Skip Headers
Oracle® C++ Call Interface Programmer's Guide,
11g Release 1 (11.1)

Part Number B28390-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

Statement Class

A Statement object is used for executing SQL statements. The statement may be a query returning result set, or a non-query statement returning an update count. Non-query SQL can be insert, update, or delete statements. Non-query SQL statements can also be DML statements (such as create, grant, and so on) or stored procedure calls.

A query, insert / update / delete, or stored procedure call statements may have IN bind parameters, while a stored procedure call statement may have either OUT bind parameters or bind parameters that are both IN and OUT, referred to as IN/OUT parameters.

The Statement class methods are divided into three categories:

Table 13-42 Enumerated Values used by the Statement Class

Attribute Options
Status
  • NEEDS_STREAM_DATA indicates that output Streams must be written for the streamed IN bind parameters. If there is more than one streamed parameter, call the getCurrentStreamParam() method to find out the bind parameter needing the stream. If the statement is executed iteratively, call getCurrentIteration() to find the iteration for which stream needs to be written.

  • PREPARED indicates that the Statement is set to a query.

  • RESULT_SET_AVAILABLE indicates that the getResultSet() method must be called to get the result set.

  • STREAM_DATA_AVAILABLE indicates that the input Streams must be read for the streamed OUT bind parameters. If there is more than one streamed parameter, call the getCurrentStreamParam() method to find out the bind parameter needing the stream. If the statement is executed iteratively, call getCurrentIteration() to find the iteration for which stream needs to be read.

  • UPREPARED indicates that the Statement object is not set to a query.

  • UPDATE_COUNT_AVAILABLE indicates that the getUpdateCount() method must be called to find out the update count.


Table 13-43 Statement Methods

Method Description

addIteration()


Adds an iteration for execution.

closeResultSet()


Immediately releases a result set's database and OCCI resources instead of waiting for automatic release.

closeStream()


Closes the stream specified by the parameter stream.

disableCaching()


Disables statement caching.

execute()


Runs the SQL statement.

executeArrayUpdate()


Runs insert, update, and delete statements that use only the setDataBuffer() or stream interface for bind parameters.

executeQuery()


Runs a SQL statement that returns a single ResultSet.

executeUpdate()


Runs a SQL statement that does not return a ResultSet.

getAutoCommit()


Returns the current auto-commit state.

getBatchErrorMode()


Returns the state of the batch error mode.

getBDouble()


Returns the value of an IEEE754 DOUBLE as a BDouble object.

getBfile()


Returns the value of a BFILE as a Bfile object.

getBFloat()


Returns the value of a IEEE754 FLOAT as a BFloat object.

getBlob()


Returns the value of a BLOB as a Blob object.

getBytes()


Returns the value of a SQL BINARY or VARBINARY parameter as Bytes.

getCharSet()


Returns the characterset that is in effect for the specified parameter, as a string.

getCharSetUString()


Returns the characterset that is in effect for the specified parameter, as a UString.

getClob()


Returns the value of a CLOB as a Clob object.

getConnection()


Returns the connection from which the Statement object was instantiated.

getCurrentIteration()


Returns the iteration number of the current iteration that is being processed.

getCurrentStreamIteration()


Returns the current iteration for which stream data is to be read or written.

getCurrentStreamParam()


Returns the parameter index of the current output Stream that must be read or written.

getCursor()


Returns the REF CURSOR value of an OUT parameter as a ResultSet.

getDatabaseNCHARParam()


Returns whether data is in NCHAR character set.

getDate()


Returns the value of a parameter as a Date object

getBDouble()


Returns the value of a parameter as an IEEE754 double.

getDouble()


Returns the value of a parameter as a C++ double.

getBFloat()


Returns the value of a parameter as an IEEE754 float.

getFloat()


Returns the value of a parameter as a C++ float.

getInt()


Returns the value of a parameter as a C++ int.

getIntervalDS()


Returns the value of a parameter as a IntervalDS object.

getIntervalYM()


Returns the value of a parameter as a IntervalYM object.

getMaxIterations()


Returns the current limit on maximum number of iterations.

getMaxParamSize()


Returns the current max parameter size limit.

getNumber()


Returns the value of a parameter as a Number object.

getObject()


Returns the value of a parameter as a PObject.

getOCIStatement()


Returns the OCI statement handle associated with the Statement.

getRef()


Returns the value of a REF parameter as RefAny

getResultSet()


Returns the current result as a ResultSet.

getRowid()


Returns the row id parameter value as a Bytes object.

getSQL()


Returns the current SQL string associated with the Statement object.

getSQLUString()


Returns the current SQL string associated with the Statement object; globalization enabled.

getStream()


Returns the value of the parameter as a stream.

getString()


Returns the value of the parameter as a string.

getTimestamp()


Returns the value of the parameter as a Timestamp object

getUInt()


Returns the value of the parameter as a C++ unsigned int

getUpdateCount()


Returns the current result as an update count for non-query statements.

getUString()


Returns the value of a UString.

getVector()


Returns the specified parameter as a vector.

getVectorOfRefs()


Returns the column in the current position as a vector of REFs.

isNull()


Checks whether the parameter is NULL.

isTruncated()


Checks whether the value is truncated.

preTruncationLength()


Returns the actual length of the parameter before truncation.

registerOutParam()


Registers the type and max size of the OUT parameter.

setAutoCommit()


Specifies auto commit mode.

setBatchErrorMode()


Enables or disables the batch error processing mode.

setBDouble()


Sets a parameter to an IEEE double value.

setBfile()


Sets a parameter to a Bfile value.

setBFloat()


Sets a parameter to an IEEE float value.

setBinaryStreamMode()


Specifies that a column is to be returned as a binary stream.

setBlob()


Sets a parameter to a Blob value.

setBytes()


Sets a parameter to a Bytes array.

setCharacterStreamMode()


Specifies that a column is to be returned as a character stream.

setCharSet()


Specifies the characterset as a string.

setCharSetUString()


Specifies the character set as a UString.

setClob()


Sets a parameter to a Clob value.

setDate()


Sets a parameter to a Date value.

setDatabaseNCHARParam()


Sets to true if the data is to be in the NCHAR character set of the database; set to false to restore the default.

setDataBuffer()


Specifies a data buffer where data would be available for reading or writing.

setDataBufferArray()


Specifies an array of data buffers where data would be available for reading or writing.

setDouble()


Sets a parameter to a C++ double value.

setErrorOnNull()


Enables Or Disables exceptions for reading of NULL values.

setErrorOnTruncate()


Enables Or Disables exception when truncation occurs.

setFloat()


Sets a parameter to a C++ float value.

setInt()


Sets a parameter to a C++ int value.

setIntervalDS()


Sets a parameter to a IntervalDS value.

setIntervalYM()


Sets a parameter to a IntervalYM value.

setMaxIterations()


Sets the maximum number of invocations that will be made for the DML statement.

setMaxParamSize()


Sets the maximum amount of data that can sent or returned from the parameter.

setNull()


Sets a parameter to SQL NULL.

setNumber()


Sets a parameter to a Number value.

setObject()


Sets the value of a parameter using an object.

setPrefetchMemorySize()


Sets the amount of memory that will be used internally by OCCI to store data fetched during each round trip to the server.

setPrefetchRowCount()


Sets the number of rows that will be fetched internally by OCCI during each round trip to the server.

setRef()


Sets the value of a parameter to a reference.

setRowid()


Sets a row id bytes array for a bind position.

setSQL()


Associates new SQL string with Statement object.

setSQLUString()


Associates new SQL string with Statement object; globalization enabled.

setString()


Sets a parameter for a specified index.

setTimestamp()


Sets a parameter to a Timestamp value.

setUInt()


Sets a parameter to a C++ unsigned int value.

setUString()


Sets a parameter for a specified index; globalization enabled.

setVector()


Sets a parameter to a vector of unsigned int.

setVectorOfRefs()


Sets a parameter to a vector; should be used when the type is a collection of REFs.

status()


Returns the current status of the statement. This is useful when there is streamed data to be written.



addIteration()

After specifying set parameters, an iteration is added for execution.

Syntax

void addIteration();

closeResultSet()

Immediately releases the specified resultSet's database and OCCI resources when the result set is not needed.

Syntax

void closeResultSet(
   ResultSet *resultSet);
Parameter Description
resultSet
The result set to be closed; may be a result of getResultSet(), executeQuery(), or getCursor() calls on the current statement, or by a getCursor() call of another result set on the same statement.


closeStream()

Closes the stream specified by the parameter stream.

Syntax

void closeStream(
   Stream *stream); 
Parameter Description
stream
The stream to ne closed.


disableCaching()

Disables statement caching. Used if a user wishes to destroy a statement instead of caching it. Effective only if statement caching is enabled.

Syntax

void disableCaching();

execute()

Executes an SQL statement that may return either a result set or an update count. The statement may have read-able streams which may have to be written, in which case the results of the execution may not be readily available. The returned value Status is defined in Table 13-42.

If output streams are used for OUT bind variables, they must be completely read in order. The getCurrentStreamParam() method would indicate which stream needs to be read. Similarly, getCurrentIteration() would indicate the iteration for which data is available.

Syntax Description
Status execute(
   const string &sql="");
Executes the SQL Statement.
Status execute(
   const UString &sql);
Executes the SQL Statement; globalization enabled.

Parameter Description
sql
The SQL statement to be executed. This can be NULL if the executeArrayUpdate() method was used to associate the sql with the statement.


executeArrayUpdate()

Executes insert/update/delete statements which use only the setDataBuffer() or stream interface for bind parameters. The bind parameters must be arrays of size arrayLength parameter. The statement may have writeable streams which may have to be written. The returned value Status is defined in Table 13-42.

If output streams are used for OUT bind variables, they must be completely read in order. The getCurrentStreamParam() method would indicate which stream needs to be read. Similarly, getCurrentIteration() would indicate the iteration for which data is available.

Note:

You cannot perform array executes for queries or callable statements.

Syntax

Status executeArrayUpdate(
   unsigned int arrayLength);
Parameter Description
arrayLength
The number of elements provided in each buffer of bind variables.


executeQuery()

Runs a SQL statement that returns a ResultSet. Should not be called for a statement which is not a query, has streamed parameters. Returns a ResultSet that contains the data produced by the query.

Syntax Description
ResultSet* executeQuery(
   const string &sql="");
Executes the SQL Statement that returns a ResultSet.
ResultSet* executeQuery(
   const UString &sql);
Executes the SQL Statement that returns a ResultSet; globalization enabled.

Parameter Description
sql
The SQL statement to be executed. This can be NULL if the executeArrayUpdate() method was used to associate the sql with the statement.


executeUpdate()

Executes a non-query statement such as a SQL INSERT, UPDATE, DELETE statement, a DDL statement such as CREATE/ALTER and so on, or a stored procedure call. Returns either the row count for INSERT, UPDATE or DELETE or 0 for SQL statements that return nothing.

Syntax Description
unsigned int executeUpdate(
   const string &sql="");
Executes a non-query statement.
unsigned int executeUpdate(
   const UString &sql);
Executes a non-query statement; globalization enabled.

Parameter Description
sql
The SQL statement to be executed. This can be NULL if the executeArrayUpdate() method was used to associate the sql with the statement.


getAutoCommit()

Returns the current auto-commit state.

Syntax

bool getAutoCommit() const;

getBatchErrorMode()

Returns the state of the batch error mode; TRUE if the batch error mode is enabled, FALSE otherwise.

Syntax

bool getBatchErrorMode() const;

getBDouble()

Returns the value of an IEEE754 DOUBLE column, which has been defined as an OUT bind. If the value is SQL NULL, the result is 0.

Syntax

BDouble getBDouble(
   unsigned int paramIndex) = 0;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getBfile()

Returns the value of a BFILE parameter as a Bfile object.

Syntax

Bfile getBfile(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getBFloat()

Gets the value of an IEEE754 FLOAT column, which has been defined as an OUT bind. If the value is SQL NULL, the result is 0.

Syntax

BFloat getBFloat(
   unsigned int paramIndex) = 0;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getBlob()

Returns the value of a BLOB parameter as a Blob.

Syntax

Blob getBlob(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getBytes()

Returns the value of n SQL BINARY or VARBINARY parameter as Bytes; if the value is SQL NULL, the result is NULL.

Syntax

Bytes getBytes(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getCharSet()

Returns the characterset that is in effect for the specified parameter, as a string.

Syntax

string getCharSet(
   unsigned int paramIndex) const;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getCharSetUString()

Returns the character set that is in effect for the specified parameter, as a UString.

Syntax

UString getCharSetUString(
   unsigned int paramIndex) const;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getClob()

Get the value of a CLOB parameter as a Clob. Returns the parameter value.

Syntax

Clob getClob(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getConnection()

Returns the connection from which the Statement object was instantiated.

Syntax

Connection* getConnection() const;

getCurrentIteration()

If the prepared statement has any output Streams, this method returns the current iteration of the statement that is being processed by OCCI. If this method is called after all the invocations in the set of iterations has been processed, it returns 0. Returns the iteration number of the current iteration that is being processed. The first iteration is numbered 1 and so on. If the statement has finished execution, a 0 is returned.

Syntax

unsigned int getCurrentIteration() const;

getCurrentStreamIteration()

Returns the current parameter stream for which data is available.

Syntax

unsigned int getCurrentStreamIteration() const;

getCurrentStreamParam()

Returns the parameter index of the current output Stream parameter that must be written. If the prepared statement has any output Stream parameters, this method returns the parameter index of the current output Stream that must be written. If no output Stream needs to be written, or there are no output Stream parameters in the prepared statement, this method returns 0.

Syntax

unsigned int getCurrentStreamParam() const;

getCursor()

Gets the REF CURSOR value of an OUT parameter as a ResultSet. Data can be fetched from this result set. The OUT parameter must be registered as CURSOR with the registerOutParam() method. Returns a ResultSet for the OUT parameter value.

Note:

If there are multiple REF CURSORs being returned due to a batched call, data from each cursor must be completely fetched before retrieving the next REF CURSOR and starting fetch on it.

Syntax

ResultSet * getCursor(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getDatabaseNCHARParam()

Returns whether data is in NCHAR character set or not.

Syntax

bool getDatabaseNCHARParam(
   unsigned int paramIndex) const;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getDate()

Get the value of a SQL DATE parameter as a Date object. Returns the parameter value; if the value is SQL NULL, the result is NULL.

Syntax

Date getDate(
   unsigned int paramIndex) const;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getDouble()

Get the value of a DOUBLE parameter as a C++ double. Returns the parameter value; if the value is SQL NULL, the result is 0.

Syntax

double getDouble(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getFloat()

Get the value of a FLOAT parameter as a C++ float. Returns the parameter value; if the value is SQL NULL, the result is 0.

Syntax

float getFloat(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getInt()

Get the value of an INTEGER parameter as a C++ int. Returns the parameter value; if the value is SQL NULL, the result is 0.

Syntax

unsigned int getInt(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getIntervalDS()

Get the value of a parameter as a IntervalDS object.

Syntax

IntervalDS getIntervalDS(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getIntervalYM()

Get the value of a parameter as a IntervalYM object.

Syntax

IntervalYM getIntervalYM(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getMaxIterations()

Gets the current limit on maximum number of iterations. Default is 1. Returns the current maximum number of iterations.

Syntax

unsigned int getMaxIterations() const;

getMaxParamSize()

The maxParamSize limit (in bytes) is the maximum amount of data sent or returned for any parameter value; it only applies to character and binary types. If the limit is exceeded, the excess data is silently discarded. Returns the current max parameter size limit.

Syntax

unsigned int getMaxParamSize(
   unsigned int paramIndex) const;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getNumber()

Gets the value of a NUMERIC parameter as a Number object. Returns the parameter value; if the value is SQL NULL, the result is NULL.

Syntax

Number getNumber(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getObject()

Gets the value of a parameter as a PObject. This method returns an PObject whose type corresponds to the SQL type that was registered for this parameter using registerOutParam(). Returns A PObject holding the OUT parameter value.

Note:

This method may be used to read database-specific, abstract data types.

Syntax

PObject * getObject(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getOCIStatement()

Get the OCI statement handle associated with the Statement.

Syntax

OCIStmt * getOCIStatement() const;

getRef()

Get the value of a REF parameter as RefAny. Returns the parameter value.

Syntax

RefAny getRef(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getResultSet()

Returns the current result as a ResultSet.

Syntax

ResultSet * getResultSet();

getRowid()

Get the rowid parameter value as a Bytes.

Syntax

Bytes getRowid(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getSQL()

Returns the current SQL string associated with the Statement object.

Syntax

string getSQL() const;

getSQLUString()

Returns the current SQL UString associated with the Statement object; globalization enabled.

Syntax

UString getSQLUString() const;

getStream()

Returns the value of the parameter as a stream.

Syntax

Stream * getStream(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getString()

Get the value of a CHAR, VARCHAR, or LONGVARCHAR parameter as an string. Returns the parameter value; if the value is SQL NULL, the result is empty string.

Syntax

string getString(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getTimestamp()

Get the value of a SQL TIMESTAMP parameter as a Timestamp object. Returns the parameter value; if the value is SQL NULL, the result is NULL

Syntax

Timestamp getTimestamp(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getUInt()

Get the value of a BIGINT parameter as a C++ unsigned int. Returns the parameter value; if the value is SQL NULL, the result is 0.

Syntax

unsigned int getUInt(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getUpdateCount()

Returns the current result as an update count.

Syntax

unsigned int getUpdateCount() const;

getUString()

Returns the value as a UString.

Note:

This method should be called only if the environment's character set is UTF16, or if setCharset() method has been called to explicitly retrieve UTF16 data.

Syntax

UString getUString(
   unsigned int paramIndex);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


getVector()

Returns the column in the current position as a vector. The column at the position, specified by index, should be a collection type (varray or nested table). The SQL type of the elements in the collection should be compatible with the type of the vector.

Syntax Description
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   std::vector<UString> &vect);
Used for vectors of UString Class; globalization enabled.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<BDouble> &vect);
Used for BDouble vectors.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<BFile> &vect);
Used for vectors of BfileClass.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<BFloat> &vect);
Used for BFloat vectors.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Blob> &vect);
Used for vectors of Blob Class.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Clob> &vect);
Used for Clob vectors.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Date> &vect);
Used for vectors of Date Class.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<double> &vect);
Used for vectors of double Class.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<float> &vect);
Used for vectors of float Class.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<int> &vect);
Used for vectors of int Class.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<IntervalDS> &vect);
Used for vectors of IntervalDSClass.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<IntervalYM> &vect);
Used for vectors of IntervalYMClass.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Number> &vect);
Used for vectors of Number Class.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<RefAny> &vect);
Used for vectors of RefAnyClass.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<string> &vect);
Used for vectors of string Class.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<T *> &vect);
Intended for use on platforms where partial ordering of function templates is supported.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<T> &vect);
Intended for use on platforms where partial ordering of function templates is not supported, such as Windows NT and z/OS. For OUT binds.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Timestamp> &vect);
Used for vectors of Timestamp Class.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<u <Ref<T> > &vect);
Available only on platforms where partial ordering of function templates is supported.
void getVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<unsigned int> &vect);
Used for on vectors of unsigned int Class.

Parameter Description
stmt
The statement.
paramIndex
Parameter index.
vect
Reference to the vector (OUT parameter) into which the values should be retrieved.


getVectorOfRefs()

This method returns the column in the current position as a vector of REFs. The column should be a collection type (varray or nested table) of REFs. Used with OUT binds.

Syntax

void getVectorOfRefs(
   Statement *stmt,
   unsigned int colIndex,
   vector< Ref<T> > &vect);
Parameter Description
stmt
The statement object.
colIndex
Column index; first column is 1, second is 2, and so on.
vect
The reference to the vector of REFs (OUT parameter). It is recommended to use getVectorOfRefs() instead of specialized getVector() function for Ref<T>.


isNull()

An OUT parameter may have the value of SQL NULL; isNull() reports whether the last value read has this special value. Note that you must first call getxxx() on a parameter to read its value and then call isNull() to see if the value was SQL NULL. Returns TRUE if the last parameter read was SQL NULL.

Syntax

bool isNull(
   unsigned int paramIndex ) const;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


isTruncated()

This method checks whether the value of the parameter is truncated. If the value of the parameter is truncated, then TRUE is returned; otherwise, FALSE is returned.

Syntax

bool isTruncated(
   unsigned int paramIndex) const;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


preTruncationLength()

Returns the actual length of the parameter before truncation.

Syntax

int preTruncationLength(
   unsigned int paramIndex) const;
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.


registerOutParam()

This method registers the type of each out parameter of a PL/SQL stored procedure. Before executing a PL/SQL stored procedure, you must explicitly call this method to register the type of each out parameter. This method should be called for out parameters only. Use the setxxx() method for in/out parameters.

Syntax Description
void registerOutParam(
   unsigned int paramIndex,
   Type type,
   unsigned int maxSize=0,
   const string &sqltype="");
Registers the type of each out parameter of a PL/SQL stored procedure.
void registerOutParam(
   unsigned int paramIndex,
   Type type,
   unsigned int maxSize,
   const string typName,
   const string &schName);
Registers the type of each out parameter of a PL/SQL stored procedure; string support.
void registerOutParam(
   unsigned int paramIndex,
   Type type,
   unsigned int maxSize,
   const UString &typName,
   const UString &schName);
Registers the type of each out parameter of a PL/SQL stored procedure; globalization enabled, or UString support.

Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
type
SQL type code defined by type; only datatypes corresponding to OCCI data types such as Date, Bytes, and so on.
maxSize
The maximum size of the retrieved value. For datatypes of OCCIBYTES and OCCISTRING, maxSize should be greater than 0.
sqltype
The name of the type in the data base (used for types which have been created with CREATE TYPE).
typName
The name of the type.
schName
The schema name.


setAutoCommit()

A Statement can be in auto-commit mode. In this case any statement executed is also automatically committed. By default, the auto-commit mode is turned-off.

Syntax

void setAutoCommit(
   bool autoCommit);
Parameter Description
autoCommit
TRUE enables auto-commit; FALSE disables auto-commit.


setBatchErrorMode()

Enables or disables the batch error processing mode.

Syntax

virtual void setBatchErrorMode(
   bool batchErrorMode);
Parameter Description
batchErrorMode
TRUE enables batch error processing; FALSE disables batch error processing.


setBDouble()

Sets an IEEE754 double as a bind value to a Statement object at the position specified by paramIndex attribute.

Syntax

void setBDouble(
   unsigned int paramIndex,
   const BDouble &dval);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
dval
The parameter value.


setBfile()

Sets a parameter to a Bfile value.

Syntax

void setBfile(
   unsigned int paramIndex,
   const Bfile &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.


setBFloat()

Sets an IEEE754 float as a bind value to a Statement object at the position specified by the paramIndex attribute.

Syntax

void setBFloat(
   unsigned int paramIndex,
   const BFloat &fval);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
fval
The parameter value.


setBinaryStreamMode()

Defines that a column is to be returned as a binary stream.

Syntax Description
void setBinaryStreamMode(
   unsigned int colIndex,
   unsigned int size);
Sets column returned to be a binary stream.
void setBinaryStreamMode(
   unsigned int colIndex,
   unsigned int size
   bool inArg);
Sets column returned to be a binary stream; used when have PL/SQL IN or IN/OUT arguments in the bind position.

Parameter Description
colIndex
Column index; first column is 1, second is 2, and so on.
size
The amount of data to be read or returned as a binary Stream.
inArg
Pass TRUE if the bind position is a PL/SQL IN or IN/OUT argument


setBlob()

Sets a parameter to a Blob value.

Syntax

void setBlob(
   unsigned int paramIndex,
   const Blob &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.


setBytes()

Sets a parameter to a Bytes array.

Syntax

void setBytes(
   unsigned int paramIndex,
   const Bytes &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.


setCharacterStreamMode()

Defines that a column is to be returned as a character stream.

Syntax Description
void setCharacterStreamMode(
   unsigned int colIndex,
   unsigned int size);
Sets column returned to be a character stream.
void setCharacterStreamMode(
   unsigned int colIndex,
   unsigned int size,
   bool inArg);
Sets column returned to be a character stream; used when have PL/SQL IN or IN/OUT arguments in the bind position.

Parameter Description
colIndex
Column index; first column is 1, second is 2, and so on.
size
The amount of data to be read or returned as a character Stream.
inArg
Pass TRUE if the bind position is a PL/SQL IN or IN/OUT argument


setCharSet()

Overrides the default character set for the specified parameter. Data is assumed to be in the specified character set and is converted to database character set. For OUT binds, this specifies the character set to which database characters are converted to.

Syntax

void setCharSet(
   unsigned int paramIndex,
   string &charSet);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
charSet
Selected character set, as a string.


setCharSetUString()

Overrides the default character set for the specified parameter. Data is assumed to be in the specified character set and is converted to database character set. For OUT binds, this specifies the character set to which database characters are converted to.

Syntax

void setCharSetUString(
   unsigned int paramIndex,
   const UString& charSet); 
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
charSet
Selected character set, as a UString.


setClob()

Sets a parameter to a Clob value.

Syntax

void setClob(
   unsigned int paramIndex,
   const Clob &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.


setDate()

Sets a parameter to a Date value.

Syntax

void setDate(
   unsigned int paramIndex,
   const Date &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.


setDatabaseNCHARParam()

If the parameter is going to be inserted in a column that contains data in the database's NCHAR character set, then OCCI must be informed by passing a TRUE value. A FALSE can be passed to restore the dafault.Returns returns the character set that is in effect for the specified parameter.

Syntax

void setDatabaseNCHARParam(
   unsigned int paramIndex,
   bool isNCHAR);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
isNCHAR
TRUE if this parameter contains data in Database's NCHAR character set; FALSE otherwise


setDataBuffer()

Specifies a data buffer where data would be available. Also used for OUT bind parameters of callable statements.

The buffer parameter is a pointer to a user allocated data buffer. The current length of data must be specified in the length parameter. The amount of data should not exceed the size parameter. Finally, type is the data type of the data.

Note that not all types can be supplied in the buffer. For example, all OCCI allocated types (such as Bytes, Date and so on) cannot be provided by the setDataBuffer() interface. Similarly, C++ Standard Library strings cannot be provided with the setDataBuffer() interface either. The type can be any of OCI data types such VARCHAR2, CSTRING, CHARZ and so on.

If setDataBuffer() is used to specify data for iterative or array executes, it should be called only once in the first iteration only. For subsequent iterations, OCCI would assume that data is at buffer +(i*size) location where i is the iteration number. Similarly the length of the data would be assumed to be at (length+i).

Syntax

void setDataBuffer(
   unsigned int paramIndex,
   void *buffer,
   Type type,
   sb4 size,
   ub2 *length,
   sb2 *ind = NULL,
   ub2 *rc= NULL);

Parameter Description
paramIndex Parameter index; first parameter is 1, second is 2, and so on.
buffer
Pointer to user-allocated buffer. For iterative or array executes, it should have numIterations() size bytes in it. For array fetches, it should have numRows * size bytes in it. For gather or scatter binds and defines, this structure stores the address of OCIIOVec and the number of OCIIOVec elements that start at that address.
type
Type of the data that is provided (or retrieved) in the buffer.
size
Size of the data buffer; for iterative and array executes, it is the size of each element of the data items. For gather or scatter binds and defines, it is the size of the OCIIOVecArray to which the buffer points; the mode must be set to IOVEC.
length
Pointer to the length of data in the buffer; for iterative and array executes, it should be an array of length data for each buffer element; the size of the array should be equal to arrayLength().
ind
Indicator. For iterative and array executes, an indicator for every buffer element.
rc
Returns code; for iterative and array executes, a return code for every buffer element.



setDataBufferArray()

Specifies an array of data buffers where data would be available for reading or writing. Used for IN, OUT, and IN/OUT bind parameters for stored procedures which read/write array parameters.

Note:

For OUT and IN/OUT binds, the number of elements returned in the array is returned in arrayLength as well. The client must make sure that it has allocated size *arraySize bytes for the buffer.



Syntax
void setDataBufferArray(
   unsigned int paramIndex,
   void *buffer,
   Type type,
   ub4 arraySize,
   ub4 *arrayLength,
   sb4 elementSize,
   ub2 *elementLength,
   sb2 *ind = NULL,
   ub2 *rc = NULL);

Parameter Description
paramIndex Parameter index; first parameter is 1, second is 2, and so on.
buffer
Pointer to user-allocated buffer. It should have size* arraySize bytes in it. For gather or scatter binds and defines, this structure stores the address of OCIIOVec and the number of OCIIOVec elements that start at that address.
type
Type of the data that is provided (or retrieved) in the buffer.
arraySize
Maximum number of elements in the array.
arrayLength
Pointer to number of current elements in the array.
elementSize
Size of the data buffer for each element. For iterative and array executes, it is the size of each element of the data items. When using gather or scatter binds and defines, it is the size of the OCIIOVecArray; the mode must be set to IOVEC.
elementLemgth
Pointer to an array of lengths. elementLength[i] has the current length of the ith element of the array.
ind
Pointer to an array of indicators. An indicator for every buffer element.
rcs
Pointer to an array of return codes.



setDouble()

Sets a parameter to a C++ double value. 



Syntax
void setDouble(
   unsigned int paramIndex,
   double val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setErrorOnNull()

Enables/disables exceptions for reading of NULL values on paramIndex parameter of the statement. If exceptions are enabled, calling a getxxx() on paramIndex parameter would result in an SQLException if the parameter value is NULL. This call can also be used to disable exceptions.



Syntax
void setErrorOnNull(
   unsigned int paramIndex,
   bool causeException);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
causeException
Enable exceptions if TRUE. Disable if FALSE.



setErrorOnTruncate()

This method enables/disables exceptions when truncation occurs.



Syntax
void setErrorOnTruncate(
   unsigned int paramIndex,
   bool causeException);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
causeException
Enable exceptions if TRUE. Disable if FALSE.



setFloat()

Sets a parameter to a C++ float value. 



Syntax
void setFloat(
   unsigned int paramIndex,
   float val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setInt()

Sets a parameter to a C++ int value. 



Syntax
void setInt(
   unsigned int paramIndex,
   int val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setIntervalDS()

Sets a parameter to a IntervalDS value.



Syntax
void setIntervalDS(
   unsigned int paramIndex,
   const IntervalDS &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setIntervalYM()

Sets a parameter to a Interval value. 



Syntax
void setIntervalYM(
   unsigned int paramIndex,
   const IntervalYM &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setMaxIterations()

Sets the maximum number of invocations that will be made for the DML statement. This must be called before any parameters are set on the prepared statement. The larger the iterations, the larger the numbers of parameters sent to the server in one round trip. However, a large number causes more memory to be reserved for all the parameters. Note that this is just the maximum limit. Actual number of iterations depends on the number of calls to addIteration().



Syntax
void setMaxIterations(
   unsigned int maxIterations);
Parameter Description
maxIterations
Maximum number of iterations allowed on this statement.



setMaxParamSize()

This method sets the maximum amount of data to be sent or received for the specified parameter. It only applies to character and binary data. If the maximum amount is exceeded, the excess data is discarded. This method can be very useful when working with a LONG column. It can be used to truncate the LONG column by reading or writing it into a string or Bytes data type.



If the getSQL() or setBytes() method has been called to bind a value to an IN/OUT parameter of a PL/SQL procedure, and the size of the OUT value is expected to be greater than the size of the IN value, then setMaxParamSize() should be called.



Syntax
void setMaxParamSize(
   unsigned int paramIndex,
   unsigned int maxSize);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
maxSize
The new maximum parameter size limit; must be >0.



setNull()

Sets a parameter to SQL NULL. Note that you must specify the parameter's SQL type. 

Syntax Description
void setNull(
   unsigned int paramIndex,
   Type type);
Sets the value of a parameter to NULL using an object.
void setNull(
   unsigned int paramIndex,
   Type type,
   const string &typeName,
   const string &schemaName = "")
Sets the value of a parameter to NULL for object and collection types, OCCIPOBJECT and OCCIVECTOR. Uses the appropriate schema and type name of the object or collection type. Support for string.
void setNull(
   unsigned int paramIndex, 
   Type type, 
   UString &typeName, 
   UString &schemaName);
Sets the value of a parameter to NULL for object and collection types, OCCIPOBJECT and OCCIVECTOR. Uses the appropriate schema and type name of the object or collection type. Support for UString.


Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
type
SQL type.
typeName
Type name of the object or collection.
schemaName
Name of the schema where the object or collection is defined.



setNumber()

Sets a parameter to a Number value. 



Syntax
void setNumber(
   unsigned int paramIndex,
   const Number &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setObject()

Sets the value of a parameter using an object; use the C++.lang equivalent objects for integral values. The OCCI specification specifies a standard mapping from C++ Object types to SQL types. The given parameter C++ object will be converted to the corresponding SQL type before being sent to the database.



Syntax
void setObject(
   unsigned int paramIndex,
   PObject* val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The object containing the input parameter value.
sqltyp
The SQL type name of the object to be set.



setPrefetchMemorySize()

Sets the amount of memory that will be used internally by OCCI to store data fetched during each round trip to the server. A value of 0 means that the amount of data fetched during the round trip is constrained by the FetchRowCount parameter. If both parameters are nonzero, the smaller of the two is used. 



Syntax
void setPrefetchMemorySize(
   unsigned int bytes);
Parameter Description
bytes
Number of bytes used for storing data fetched during each server round trip.



setPrefetchRowCount()

Sets the number of rows that will be fetched internally by OCCI during each round trip to the server. A value of 0 means that the amount of data fetched during the round trip is constrained by the FetchMemorySize parameter. If both parameters are nonzero, the smaller of the two is used. If both of these parameters are zero, row count internally defaults to 1 row and that is the value returned from the getFetchRowCount() method.



Syntax
void setPrefetchRowCount(
   unsigned int rowCount);
Parameter Description
rowCount
Number of rows to fetch for each round trip to the server.



setRef()

Sets the value of a parameter to a reference. A Ref<T> instance will be implicitly converted to a RefAny object during this call.

Syntax Description
void setRef(
   unsigned int paramIndex,
   const RefAny &refAny); 
Sets the value of a parameter to a reference.
void setRef(
   unsigned int paramIndex,
   const RefAny &refAny,
   const string &typName,
   const string &schName = "");
Sets the value of a parameter to a reference. If the Statement represents a callable PL/SQL method, pass the schema name and type name of the object represented by the Ref. Support for string.
void setRef(
   unsigned int paramIndex,
   const RefAny &refAny,
   const UString &typName,
   const UString &schName);
Sets the value of a parameter to a reference. If the Statement represents a callable PL/SQL method, pass the schema name and type name of the object represented by the Ref. Support for UString.


Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
refAny
The reference.
typName
The type of the object [optional].
schName
The schema where the object type is defined [optional].



setRowid()

Sets a Rowid bytes array for a bind position.



Syntax
void setRowid(
   unsigned int paramIndex,
   const Bytes &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setSQL()

A new SQL string can be associated with a Statement object by this call. Resources associated with the previous SQL statement are freed. In particular, a previously obtained result set is invalidated. If an empty sql string, "", was used when the Statement was created, a setSQL method with the proper SQL string must be done prior to execution.



Syntax
void setSQL(
   const string &sql);
Parameter Description
sql
Any SQL statement.



setSQLUString()

Associate an SQL statement with this object. Unicode support: the client Environment should be initialized in OCCIUTIF16 mode.



Syntax
void setSQLUString(
   const UString &sql);
Parameter Description
sql
A SQL statement in same character set as the connection source of the statement.



setString()

Sets a parameter for a specified index. 



Syntax
void setString(
   unsigned int paramIndex,
   const string &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setTimestamp()

Sets a parameter to a Timestamp value. 



Syntax
void setTimestamp(
   unsigned int paramIndex,
   const Timestamp &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setUInt()

Sets a parameter to a C++ unsigned int value. 



Syntax
void setUInt(
   unsigned int paramIndex,
   unsigned int val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setUString()

Sets a parameter for a specified index; globalization enabled. 



Syntax
void setUString(
   unsigned int paramIndex,
   const UString &val);
Parameter Description
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
val
The parameter value.



setVector()

Sets a parameter to a vector. This method should be used when the type is a collection type, varrays or nested tables. The SQL Type of the elements in the collection should be compatible with the type of the vector. For example, if the collection is a varray of VARCHAR2, use vector<string>.

Syntax Description
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector< T > &vect,
   const string &schemaName,
   const string &typeName);
Intended for use on platforms where partial ordering of function templates is not supported, such as Windows NT and z/OS. Multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<T* > &vect,
   const string &schemaName,
   const string &typeName);
Intended for use on platforms where partial ordering of function templates is supported. Multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<BDouble> &vect
   const string &sqltype);
Sets a BDouble vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Bfile> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const Bfile vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Bfile> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const BFile vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<BFloat> &vect
   const string &sqltype);
Sets a BFloat vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Blob> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const Blob vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Blob> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const Blob vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Clob> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const Clob vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Clob> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const Clob vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Date> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const Date vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Date> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const Date vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<double> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const double vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<double> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const double vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<float> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const float vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<float> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const float vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<int> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const int vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<int> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const int vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<IntervalDS> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const IntervalDS vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<IntervalDS> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const IntervalDS vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<IntervalYM> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const IntervalYM vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<IntervalYM> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const IntervalYM vector; UTF16 support
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Number> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const Number vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Number> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const Number vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<RefAny> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const RefAny vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<RefAny> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const RefAny vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<string> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const string vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<string> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const string vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Timestamp> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const Timestamp vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Timestamp> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const Timestamp vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<unsigned int> &vect,
   const string &schemaName,
   const string &typeName);
Sets a const unsigned int vector; multibyte support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<unsigned int> &vect,
   const UString &schemaName,
   const UString &typeName);
Sets a const unsigned int vector; UTF16 support.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Bfile> &vect,
   string &sqltype);
Sets a Bfile vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Blob> &vect,
   string &sqltype);
Sets a Blob vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Clob> &vect,
   string &sqltype);
Sets a Clob vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Date> &vect,
   string &sqltype);
Sets a Date vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<double> &vect,
   string &sqltype);
Sets a double vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<float> &vect,
   string &sqltype);
Sets a float vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<int> &vect,
   string &sqltype);
Sets an int vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<IntervalDS> &vect,
   string &sqltype);
Sets an IntervalDS vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<IntervalYM> &vect,
   string &sqltype);
Sets an IntervalYM vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Number> &vect,
   string &sqltype);
Sets a Number vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<RefAny> &vect,
   string &sqltype);
Sets a RefAny vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<string> &vect,
   string &sqltype);
Sets a string vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Timestamp> &vect,
   string &sqltype);
Sets a Timestamp vector.
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<unsigned int> &vect,
   string &sqltype);
Sets an unsigned int vector.
template <class T>
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector< T* > &vect,
   const string &sqltype);
Intended for use on platforms where partial ordering of function templates is not supported.
template <class T>
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<T> &vect,
   const string &sqltype);
Intended for use on platforms where partial ordering of function templates is supported.
template <class T>
void setVector(
   Statement *stmt,
   unsigned int paramIndex,
   vector<Ref<T>> &vect,
   string &sqltype);
Available only on platforms where partial ordering of function templates is supported. setVectorOfRefs() can be used instead.


Parameter Description
stmt
Statement on which parameter is to be set.
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
vect
The vector to be set.
sqltype
Sqltype of the collection in the database. For example, CREATE TYPE num_coll AS VARRAY OF NUMBER. And the column/parameter type is num_coll. The sqltype would be num_coll.
schemaName
Name of the schema used
typeName
Type



setVectorOfRefs()

Sets a parameter to a vector; should be used when the type is a collection of REFs or nested tables of REFs.

Syntax Description
template  <class T> void setVectorOfRefs(
   Statement *stmt, unsigned int paramIndex,
   const vector<Ref<T> > &vect,
   const string &sqltype);
Sets a parameter to a vector; should be used when the type is a collection of REFs are varrays or nested tables of REFs.
template  <class T>  void setVectorOfRefs(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Ref<T> > &vect,
   const string &sqltype);
Used for multibyte support.
template  <class T> void setVectorOfRefs(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Ref<T>> &vect,
   const string &schemaName,
   const string &typeName);
Used for multibyte support.
template  <class T> void setVectorOfRefs(
   Statement *stmt,
   unsigned int paramIndex,
   const vector<Ref<T> &vect,
   const UString &schemaName,
   const UString &typeName);
Used for UTF16 support on platforms where partial ordering of function templates is not supported, such as Windows NT and z/OS.
template <class T>  void setVector(
Statement *stmt,
unsigned int paramIndex,
const vector<T* > &vect,
const UString &schemaName,
const UString &typeName);
Used for UTF16 support on platforms where partial ordering of function templates is supported.


Parameter Description
stmt
Statement on which parameter is to be set.
paramIndex
Parameter index; first parameter is 1, second is 2, and so on.
vect
Vector to be set.
sqltype
Sqltype of the parameter or column. Use setVectorOfRefs() instead of specialized function setVector() for Ref<T>.
schemaName
Name of the schema used
typeName
Type



status()

Returns the current status of the statement. Useful when there is streamed data to be written (or read). Other methods such as getCurrentStreamParam() and getCurrentIteration() can be called to find out the streamed parameter that needs to be written and the current iteration number for an iterative or array execute. The status()method can be called repeatedly to find out the status of the execution.



The returned value, Status, is defined in Table 13-42.



Syntax
Status status() const;