Skip Headers
Oracle® Database Application Developer's Guide - Workspace Manager
10g Release 2 (10.2)

Part Number B14253-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Feedback

Go to previous page
Previous
Go to next page
Next
View PDF

4 DBMS_WM Package: Reference

Workspace Manager includes PL/SQL subprograms (procedures and functions), in a package named DBMS_WM, that perform the available features of the product. This chapter provides reference information on each subprogram.


Note:

Most Workspace Manager subprograms are procedures, but a few are functions. (A function returns a value; a procedure does not return a value.)

Most functions have names starting with Get (such as GetConflictWorkspace and GetWorkspace).


The subprograms are presented in alphabetical order. For a brief description of subprograms according to their logical groupings, see Section 1.16.

Errors (exceptions) that can occur with Workspace Manager subprograms are documented in Appendix D, including the cause and suggested user action for each error.

Syntax notes:


Add_Topo_Geometry_Layer

Adds a topology geometry layer from a version-enabled feature table to a topology.

Format

DBMS_WM.Add_Topo_Geometry_Layer(

     topology IN VARCHAR2,

     table_name IN VARCHAR2,

     column_name IN VARCHAR2,

     tg_layer_type IN VARCHAR2);

Parameters

Table 4-1 Add_Topo_Geometry_Layer Procedure Parameters

Parameter Description
topology

Topology to which to add the topology geometry layer containing the topology geometries in the specified column. The topology must have been created using the SDO_TOPO.CREATE_TOPOLOGY procedure.

table_name

Name of the topology geometry layer table containing the column specified in column_name.

column_name

Name of the column (of type SDO_TOPO_GEOMETRY) containing the topology geometries in the topology geometry layer to be added to the topology.

tg_layer_type

Type of topology geometry layer: POINT, LINE, CURVE, or POLYGON.


Usage Notes

This procedure has the same format and meaning as the SDO_TOPO.ADD_TOPO_GEOMETRY_LAYER procedure, which is documented in Oracle Spatial Topology and Network Data Models. However, you must use DBMS_WM.Add_Topo_Geometry_Layer, and not SDO_TOPO.ADD_TOPO_GEOMETRY_LAYER, to add a topology geometry layer from a version-enabled feature table to a topology. For information about Workspace Manager support for topologies, see Section 1.14.

The first call to this procedure for a given topology creates the <topology-name>_RELATION$ table, which is described in Oracle Spatial Topology and Network Data Models.

An exception is raised if topology, table_name, or column_name does not exist, if topology or table_name is not version-enabled, or if tg_layer_type is not one of the supported values.

Examples

The following example adds a topology geometry layer to the CITY_DATA topology. The topology geometry layer consists of polygon geometries in the FEATURE column of the LAND_PARCELS table.

EXECUTE DBMS_WM.Add_Topo_Geometry_Layer('CITY_DATA', 'LAND_PARCELS', 'FEATURE', 'POLYGON');

AddAsParentWorkspace

Adds a workspace as a parent workspace to a child workspace in a multiparent workspace environment.

Syntax

DBMS_WM.AddAsParentWorkspace(
   workspace         IN VARCHAR2,
   parent_workspace  IN VARCHAR2,
   auto_commit       IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-2 AddAsParentWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace to which to add the parent workspace. The name is case sensitive.

parent_workspace

Name of the workspace to add as a parent workspace of workspace. The name is case sensitive.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

This procedure is part of the support for the multiparent workspaces feature, which is described in Section 1.1.10. If workspace has only one parent workspace, this procedure makes workspace a multiparent workspace. If workspace is already a multiparent workspace, this procedure adds another parent workspace to workspace.

An exception is raised if one or more of the following apply:

Examples

The following example adds Workspace4 as a parent workspace of Workspace3. (See the hierarchy illustration in Figure 1-3 in Section 1.1.10.)

-- Allow multiparent workspaces. (Required for AddAsParentWorkspace)
EXECUTE DBMS_WM.SetSystemParameter ('ALLOW_MULTI_PARENT_WORKSPACES', 'ON');
-- Make Workspace3 multiparent by adding Workspace4 as a parent.
EXECUTE DBMS_WM.AddAsParentWorkspace ('Workspace3', 'Workspace4');

AlterSavepoint

Modifies the description of a savepoint.

Syntax

DBMS_WM.AlterSavepoint(
   workspace      IN VARCHAR2,
   sp_name        IN VARCHAR2,
   sp_description IN VARCHAR2);

Parameters

Table 4-3 AlterSavepoint Procedure Parameters

Parameter Description
workspace

Name of the workspace in which the savepoint was created. The name is case sensitive.

sp_name

Name of the savepoint. The name is case sensitive.

sp_description

Description of the savepoint.


Usage Notes

To see the current description of the savepoint, examine the DESCRIPTION column value for the savepoint in the ALL_WORKSPACE_SAVEPOINTS metadata view, which is described in Section 5.15.

An exception is raised if the user is not the workspace owner or savepoint owner or does not have the WM_ADMIN_ROLE role.

Examples

The following example modifies the description of savepoint SP1 in the NEWWORKSPACE workspace.

EXECUTE DBMS_WM.AlterSavepoint ('NEWWORKSPACE', 'SP1', 'First set of changes for scenario');

AlterVersionedTable

Alters a version-enabled table to add valid time support, rename a constraint, or rename an index.

Syntax

DBMS_WM.AlterVersionedTable(
   table_name         IN VARCHAR2,
   alter_option       IN VARCHAR2,
   parameter_options  IN VARCHAR2 DEFAULT NULL,
   ignore_last_error  IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-4 AlterVersionedTable Procedure Parameters

Parameter Description
table_name

Name of the version-enabled table to which to add valid time support. The name is not case sensitive.

alter_option

One of the following values: ADD_VALID_TIME to add valid time support, RENAME_CONSTRAINT to rename a constraint, or RANAME_INDEX to rename an index. See the Usage Notes for information about when you must and can use this procedure to rename an index or a constraint.

parameter_options

A quoted string (in the general format 'keyword=value, keyword2=value2, ...') containing keywords valid for the specified alter_option parameter value. See the Usage Notes for keywords that are valid for each alter_option parameter value.

ignore_last_error

A Boolean value (TRUE or FALSE).

TRUE ignores the last error, if any, that occurred during the previous call to the BeginBulkLoading procedure. Information about the last error is stored in the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views, which are described in Chapter 5. See the Usage Notes for more information.

FALSE (the default) does not ignore the last error, if any, that occurred during the previous call to the AlterVersionedTable procedure.


Usage Notes

Use this procedure to add valid time support, rename a constraint, or rename an index for an existing version-enabled table. For more information about adding valid time support, see Section 3.11.

If the alter_option value is ADD_VALID_TIME, you can specify none, one, or more of the following parameter_options keywords:

If the alter_option value is RENAME_CONSTRAINT, you must specify both of the following parameter_options keywords:

If the alter_option value is RENAME_INDEX, you must specify all of the following parameter_options keywords:

If the name of a constraint or index on a version-enabled table is longer than 26 characters, you must use the AlterVersionedTable procedure if you want to rename the constraint or index; you cannot use the ALTER TABLE (for a constraint) or ALTER INDEX (for an index) statement with the RENAME clause. If you use the AlterVersionedTable procedure, you do not need to include it between calls to the BeginDDL and CommitDDL procedures.

If the name of the constraint or index on a version-enabled table is 26 or fewer characters long, you can do either of the following to rename the constraint or index: use the AlterVersionedTable procedure, or use the ALTER TABLE (for a constraint) or ALTER INDEX (for an index) statement with the RENAME clause between calls to the BeginDDL and CommitDDL procedures (as explained in Section 1.8).

If a call to the AlterVersionedTable procedure fails, you should try to fix the cause of the error. Examine the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views to see the SQL statement and error message. Fix the cause of the error, and then call the AlterVersionedTable procedure again with the default ignore_last_error parameter value of FALSE. However, if the call still fails and you cannot fix the cause of the error, and if you are sure that it is safe and appropriate to ignore this error, then you have the option to ignore the error by calling the AlterVersionedTable procedure with the ignore_last_error parameter value of TRUE. Note that you are responsible for ensuring that it is safe and appropriate to ignore the error.

An exception is raised if one or more of the following apply:

Examples

The following example creates a table named MY_TABLE, version-enables it without valid time support, and then adds valid time support. After the valid time support is added, the WM_VALID column contains the default valid time period.

CREATE TABLE my_table (id NUMBER PRIMARY KEY);
EXECUTE DBMS_WM.EnableVersioning ('my_table');
INSERT INTO my_table VALUES (1);
SELECT * FROM my_table;

        ID
----------
         1

EXECUTE DBMS_WM.AlterVersionedTable('my_table', 'ADD_VALID_TIME');
SELECT * FROM my_table;

        ID
----------
WM_VALID(VALIDFROM, VALIDTILL)
--------------------------------------------------------------------------------
         1
WM_PERIOD('09-JUN-2003 10:04:13 -04:00', NULL)

The following example creates a table named SCOTT.MY_TABLE, creates an index named MY_INDEX on the VALUE column in that table, version-enables the table, and then renames the index to MY_NEW_INDEX.

CREATE TABLE scott.my_table (id NUMBER PRIMARY KEY, value INTEGER);
CREATE INDEX scott.my_index on scott.my_table(value);
EXECUTE DBMS_WM.EnableVersioning ('scott.my_table');
EXECUTE DBMS_WM.AlterVersionedTable ('scott.my_table', 'RENAME_INDEX',
  'index_owner=scott, index_name=my_index, new_index_name=my_new_index');

AlterWorkspace

Modifies the description of a workspace.

Syntax

DBMS_WM.AlterWorkspace(
   workspace              IN VARCHAR2,
   workspace_description  IN VARCHAR2);

Parameters

Table 4-5 AlterWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

workspace_description

Description of the workspace.


Usage Notes

To see the current description of the workspace, examine the DESCRIPTION column value for the savepoint in the ALL_WORKSPACES metadata view, which is described in Section 5.16.

An exception is raised if the user is not the workspace owner or does not have the WM_ADMIN_ROLE role.

Examples

The following example modifies the description of the NEWWORKSPACE workspace.

EXECUTE DBMS_WM.AlterWorkspace ('NEWWORKSPACE', 'Testing proposed scenario B');

BeginBulkLoading

Starts the bulk loading process for a version-enabled table.

Syntax

DBMS_WM.BeginBulkLoading(
   table_name            IN VARCHAR2,
   workspace             IN VARCHAR2,
   version               IN INTEGER,
   check_for_duplicates  IN BOOLEAN DEFAULT TRUE,
   ignore_last_error     IN BOOLEAN DEFAULT FALSE,
   single_transaction    IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-6 BeginBulkLoading Procedure Parameters

Parameter Description
table_name

Name of the version-enabled table into which data will be bulk loaded. The name is not case sensitive.

workspace

Name of the workspace in which bulk loading will be performed. The name is case sensitive.

version

Version number returned by the GetBulkLoadVersion function.

check_for_duplicates

A Boolean value (TRUE or FALSE).

TRUE (the default) checks for rows in the data to be bulk loaded that have the same values in primary key columns. For any duplicate records, only the record with the lowest ROWID value is kept in the table, and the rest are moved to the discards table specified in the call to the CommitBulkLoading procedure. See the Usage Notes for more information about this parameter.

FALSE does not check if any rows in the data to be bulk loaded have the same values in primary key columns.

ignore_last_error

A Boolean value (TRUE or FALSE).

TRUE ignores the last error, if any, that occurred during the previous call to the BeginBulkLoading procedure. Information about the last error is stored in the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views, which are described in Chapter 5. See the Usage Notes for more information.

FALSE (the default) does not ignore the last error, if any, that occurred during the previous call to the BeginBulkLoading procedure.

single_transaction

A Boolean value (TRUE or FALSE).

TRUE causes Workspace Manager not to perform an internal commit operation after each of several steps that it will perform after you call the CommitBulkLoading procedure, but instead to perform a commit only after it has performed all the necessary steps. TRUE also allows queries to be made on the version-enabled table.

FALSE (the default) causes Workspace Manager to perform an internal commit operation after each of several steps that it will perform after you call the CommitBulkLoading procedure, and it also disallows queries to be made on the table until a CommitBulkLoading or RollbackBulkLoading operation is complete.

See the Usage Notes for more information about this parameter.


Usage Notes

Before you can begin bulk loading data into a version-enabled table, you must call the GetBulkLoadVersion and BeginBulkLoading procedures. You must end the bulk loading session by calling either the CommitBulkLoading procedure (to commit changes made when the data was loaded) or the RollbackBulkLoading procedure (to roll back changes made when the data was loaded). For more information about bulk loading with Workspace Manager, see Section 1.7.

If single_transaction is FALSE (the default), the BeginBulkLoading procedure drops some internal Workspace Manager views on the table, to prevent DML operations and certain Workspace Manager operations on the table; however, this also prevents any queries from being made using the specified version-enabled table. Regardless of the single_transaction parameter value, and especially if it is FALSE, you should complete the bulk loading as quickly as possible and at a time when applications and users will not need to access the table. The value of the single_transaction parameter must be the same for both the BeginBulkLoading and CommitBulkLoading procedures for a bulk loading session with a specified table.

A TRUE value for the check_for_duplicates parameter does not cause any existing data in the version-enabled table to be checked. If an existing row in the version in which data is being bulk loaded (which could be the latest version of a workspace or the root version) has the same primary key values as a row in the data to be bulk loaded, the behavior depends on the history option setting for the table: if VIEW_WO_OVERWRITE is set, the newly loaded row is chained to the existing row that has the same primary key values; if VIEW_WO_OVERWRITE is not set, the new data is not bulk loaded but is instead moved to the discards table.

If a call to the BeginBulkLoading procedure fails, you should try to fix the cause of the error. Examine the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views to see the SQL statement and error message. Fix the cause of the error, and then call the BeginBulkLoading procedure again with the default ignore_last_error parameter value of FALSE. However, if the call still fails and you cannot fix the cause of the error, and if you are sure that it is safe and appropriate to ignore this error, then you have the option to ignore the error by calling the BeginBulkLoading procedure with the ignore_last_error parameter value of TRUE. Note that you are responsible for ensuring that it is safe and appropriate to ignore the error.

If performance is an issue, carefully consider whether or not you need to check for duplicate records, because a check_for_duplicates value of TRUE (the default) causes Workspace Manager to perform additional internal processing.

An exception is raised if one or more of the following apply:

Examples

The following example gets a bulk load version number for the W1 workspace, and starts the bulk load operation into the EMP table in that workspace.

DECLARE
  version INTEGER;
BEGIN
  SELECT DBMS_WM.GetBulkLoadVersion ('W1') INTO version FROM DUAL;
  DBMS_WM.BeginBulkLoading ('EMP', 'W1', version);
END;
/

BeginDDL

Starts a DDL (data definition language) session for a specified table.

Syntax

DBMS_WM.BeginDDL(
   table_name  IN VARCHAR2);

Parameters

Table 4-7 BeginDDL Procedure Parameters

Parameter Description
table_name

Name of the version-enabled table. The name is not case sensitive.


Usage Notes

This procedure starts a DDL session, and it creates a special table whose name is the same as table_name but with _LTS added to the table name. After calling this procedure, you can perform one or more DDL operations on the table or any indexes or triggers that are based on the table, and then call either the CommitDDL or RollbackDDL procedure.

In addition to creating the special <table-name>_LTS table, the procedure creates other objects:

For detailed information about performing DDL operations related to version-enabled tables, see Section 1.8; and for DDL operations on version-enabled tables in an Oracle replication environment, see also Section C.3.

An exception is raised if one or more of the following apply:

Examples

The following example begins a DDL session, adds a column named COMMENTS to the COLA_MARKETING_BUDGET table by using the special table named COLA_MARKETING_BUDGET_LTS, and ends the DDL session by committing the change.

EXECUTE DBMS_WM.BeginDDL('COLA_MARKETING_BUDGET');
ALTER TABLE cola_marketing_budget_lts ADD (comments VARCHAR2(100));
EXECUTE DBMS_WM.CommitDDL('COLA_MARKETING_BUDGET');

BeginResolve

Starts a conflict resolution session.

Syntax

DBMS_WM.BeginResolve(
   workspace  IN VARCHAR2);

Parameters

Table 4-8 BeginResolve Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.


Usage Notes

This procedure starts a conflict resolution session. While this procedure is executing, the workspace is frozen in 1WRITER mode, as explained in Section 1.1.5.

After calling this procedure, you can execute the ResolveConflicts procedure as needed for various tables that have conflicts, and then call either the CommitResolve or RollbackResolve procedure. For more information about conflict resolution, see Section 1.1.4.

An exception is raised if one or more of the following apply:

Examples

The following example starts a conflict resolution session in Workspace1.

EXECUTE  DBMS_WM.BeginResolve ('Workspace1');

ChangeWorkspaceType

Changes a workspace from not continually refreshed to continually refreshed. (Continually refreshed workspaces are explained in Section 1.1.9.)

Syntax

DBMS_WM.ChangeWorkspaceType(
   workspace       IN VARCHAR2,
   workspace_type  IN VARCHAR2 DEFAULT DBMS_WM.CR_WORKSPACE_TYPE,
   auto_commit     IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-9 ChangeWorkspaceType Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

workspace_type

Must be DBMS_WM.CR_WORKSPACE_TYPE (the default), for continually refreshed.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

For this release, you can only change a workspace that is not continually refreshed to continually refreshed; you cannot change a continually refreshed workspace to not continually refreshed.

An exception is raised if one or more of the following occur:

Examples

The following example changes the NEWWORKSPACE workspace type from not continually refreshed to continually refreshed.

EXECUTE DBMS_WM.ChangeWorkspaceType ('NEWWORKSPACE');

CommitBulkLoading

Ends the bulk loading process for a version-enabled table by committing the bulk load changes.

Syntax

DBMS_WM.CommitBulkLoading(
   table_name            IN VARCHAR2,
   discards_table        IN VARCHAR2,
   check_for_duplicates  IN BOOLEAN DEFAULT TRUE,
   enforceUCFlag         IN BOOLEAN DEFAULT TRUE,
   enforceRICFlag        IN BOOLEAN DEFAULT TRUE,
   ignore_last_error     IN BOOLEAN DEFAULT FALSE,
   single_transaction    IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-10 CommitBulkLoading Procedure Parameters

Parameter Description
table_name

Name of the version-enabled table into which data has been bulk loaded. The name is not case sensitive.

discards_table

Name of the table into which discard records are inserted. The name is not case sensitive. If the table does not already exist, it is created.

check_for_duplicates

A Boolean value (TRUE or FALSE).

TRUE (the default) checks for rows in the data to be bulk loaded that have the same values in primary key columns. For any duplicate records, only the record with the lowest ROWID value is kept in the table, and the rest are moved to the discards table. See the Usage Notes for more information about this parameter.

FALSE does not check if any rows in the data to be bulk loaded have the same values in primary key columns.

enforceUCFlag

A Boolean value (TRUE or FALSE).

TRUE (the default) enforces any unique constraints defined on to_table, ensuring that the bulk load operation does not violate any such constraints.

FALSE does not enforce any unique constraints defined on to_table for the bulk load operation.

enforceRICFlag

A Boolean value (TRUE or FALSE).

TRUE (the default) enforces any referential integrity constraints defined on to_table, ensuring that the bulk load operation does not violate any such constraints.

FALSE does not enforce any referential integrity constraints defined on to_table for the bulk load operation.

ignore_last_error

A Boolean value (TRUE or FALSE).

TRUE ignores the last error, if any, that occurred during the previous call to the CommitBulkLoading procedure. Information about the last error is stored in the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views, which are described in Chapter 5. See the Usage Notes for more information.

FALSE (the default) does not ignore the last error, if any, that occurred during the previous call to the CommitBulkLoading procedure.

single_transaction

A Boolean value (TRUE or FALSE).

TRUE causes Workspace Manager not to perform an internal commit operation after each of several steps that it performs after you call the CommitBulkLoading procedure, but instead to perform a commit only after it has performed all the necessary steps.

FALSE (the default) causes Workspace Manager to perform an internal commit operation after each of several steps that it performs after you call the CommitBulkLoading procedure.

The value of this parameter must be the same as when you called the BeginBulkLoading procedure specifying the table in table_name.


Usage Notes

For information about the requirements for bulk loading data into version-enabled tables, see Section 1.7.

This procedure generates versioning metadata for newly loaded data and synchronizes the newly loaded data with the existing versioned data in the table. It can also enforce unique and referential constraints on the newly loaded data. It re-creates all the views that were dropped by the BeginBulkLoading procedure.

A TRUE value for the check_for_duplicates parameter does not cause any existing data in the version-enabled table to be checked. If an existing row in the version in which data is being bulk loaded (which could be the latest version of a workspace or the root version) has the same primary key values as a row in the data to be bulk loaded, the behavior depends on the history option setting for the table: if VIEW_WO_OVERWRITE is set, the newly loaded row is chained to the existing row that has the same primary key values; if VIEW_WO_OVERWRITE is not set, the new data is not bulk loaded but is instead moved to the discards table.

If a call to the CommitBulkLoading procedure fails, you should try to fix the cause of the error. Examine the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views to see the SQL statement and error message. Fix the cause of the error, and then call the CommitBulkLoading procedure again with the default ignore_last_error parameter value of FALSE. However, if the call still fails and you cannot fix the cause of the error, and if you are sure that it is safe and appropriate to ignore this error, then you have the option to ignore the error by calling the CommitBulkLoading procedure with the ignore_last_error parameter value of TRUE. Note that you are responsible for ensuring that it is safe and appropriate to ignore the error.

Note the following performance considerations:

An exception is raised if one or more of the following apply:

Examples

The following example commits changes made to the EMP table during a bulk load operation, and specifies DISCARDS as the table to hold discard records.

EXECUTE DBMS_WM.CommitBulkLoading ('EMP', 'DISCARDS');

CommitDDL

Commits DDL (data definition language) changes made during a DDL session for a specified table, and ends the DDL session.

Syntax

DBMS_WM.CommitDDL(
   table_name                  IN VARCHAR2,
   ignore_last_error           IN BOOLEAN DEFAULT FALSE,
   enforce_unique_constraints  IN BOOLEAN DEFAULT FALSE,
   enforce_RICs                IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-11 CommitDDL Procedure Parameters

Parameter Description
table_name

Name of the version-enabled table. The name is not case sensitive.

ignore_last_error

A Boolean value (TRUE or FALSE).

TRUE ignores the last error, if any, that occurred during the previous call to the CommitDDL procedure. Information about the last error is stored in the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views, which are described in Chapter 5. See the Usage Notes for more information.

FALSE (the default) does not ignore the last error, if any, that occurred during the previous call to the CommitDDL procedure.

enforce_unique_constraints

A Boolean value (TRUE or FALSE).

TRUE enforces any unique constraints defined on table_name on existing versioned data in the table. This ensures that the DDL changes do not cause any such constraints to be violated, but it causes Workspace Manager to take additional time to perform the operation.

FALSE (the default) does not enforce any unique constraints defined on table_name on existing versioned data in the table.

enforce_RICs

A Boolean value (TRUE or FALSE).

TRUE enforces any referential integrity constraints defined on table_name on existing versioned data in the table. This ensures that the changes do not cause any such constraints to be violated, but it causes Workspace Manager to take additional time to perform the operation.

FALSE (the default) does not enforce any referential integrity constraints defined on table_name on existing versioned data in the table.


Usage Notes

This procedure commits changes that were made to a version-enabled table and to any indexes, triggers, and referential integrity constraints based on the version-enabled table during a DDL session. It also deletes the special <table-name>_LTS table that was created by the BeginDDL procedure.

For detailed information about performing DDL operations related to version-enabled tables, see Section 1.8; and for DDL operations on version-enabled tables in an Oracle replication environment, see also Section C.3.

The enforce_unique_constraints and enforce_RICs parameter settings apply only to existing versioned data, and do not affect whether or not existing constraints are enforced for future DML operations on the table.

If a call to the CommitDDL procedure fails, the table is left in an inconsistent state. If this occurs, you should try to fix the cause of the error. Examine the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views to see the SQL statement and error message. For example, the CommitDDL procedure might have failed because the tablespace was not large enough to add a column. Fix the cause of the error, and then call the CommitDDL procedure again with the default ignore_last_error parameter value of FALSE. However, if the call still fails and you cannot fix the cause of the error, and if you are sure that it is safe and appropriate to ignore this error, then you have the option to ignore the error by calling the CommitDDL procedure with the ignore_last_error parameter value of TRUE. Note that you are responsible for ensuring that it is safe and appropriate to ignore the error.

An exception is raised if one or more of the following apply:

Some invalid DDL operations also cause an exception when CommitDDL procedure is called. See Section 1.8 for information about DDL operations that are supported.

Examples

The following example begins a DDL session, adds a column named COMMENTS to the COLA_MARKETING_BUDGET table by using the special table named COLA_MARKETING_BUDGET_LTS, and ends the DDL session by committing the change.

EXECUTE DBMS_WM.BeginDDL('COLA_MARKETING_BUDGET');
ALTER TABLE cola_marketing_budget_lts ADD (comments VARCHAR2(100));
EXECUTE DBMS_WM.CommitDDL('COLA_MARKETING_BUDGET');

CommitResolve

Ends a conflict resolution session and saves (makes permanent) any changes in the workspace since the BeginResolve procedure was executed.

Syntax

DBMS_WM.CommitResolve(
   workspace  IN VARCHAR2);

Parameters

Table 4-12 CommitResolve Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.


Usage Notes

This procedure ends the current conflict resolution session (started by the BeginResolve procedure), and saves all changes in the workspace since the start of the conflict resolution session. Contrast this procedure with the RollbackResolve procedure, which discards all changes.

For more information about conflict resolution, see Section 1.1.4.

An exception is raised if one or more of the following apply:

Examples

The following example ends the conflict resolution session in Workspace1 and saves all changes.

EXECUTE  DBMS_WM.CommitResolve ('Workspace1');

CompressWorkspace

Deletes removable savepoints in a workspace and minimizes the Workspace Manager metadata structures for the workspace. (Removable savepoints are explained in Section 1.1.2.)

Syntax

DBMS_WM.CompressWorkspace(
   workspace                   IN VARCHAR2,
   compress_view_wo_overwrite  IN BOOLEAN
   firstSP                     IN VARCHAR2 DEFAULT NULL,
   secondSP                    IN VARCHAR2 DEFAULT NULL,
   auto_commit                 IN BOOLEAN DEFAULT TRUE,
   commit_in_batches           IN BOOLEAN DEFAULT FALSE,
   batch_size                  IN VARCHAR2 DEFAULT 'PRIMARY_KEY_RANGE',
   remove_latest_deleted_rows  IN BOOLEAN DEFAULT FALSE);

or

DBMS_WM.CompressWorkspace(
   workspace          IN VARCHAR2,
   firstSP            IN VARCHAR2 DEFAULT NULL,
   secondSP           IN VARCHAR2 DEFAULT NULL,
   auto_commit        IN BOOLEAN DEFAULT TRUE,
   commit_in_batches  IN BOOLEAN DEFAULT FALSE,
   batch_size         IN VARCHAR2 DEFAULT 'PRIMARY_KEY_RANGE',
   remove_latest_deleted_rows  IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-13 CompressWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

compress_view_wo_overwrite

A Boolean value (TRUE or FALSE).

TRUE causes history information between the affected savepoints to be deleted even if VIEW_WO_OVERWRITE was specified when versioning was enabled.

FALSE causes history information (between the affected savepoints) for a table not to be deleted if VIEW_WO_OVERWRITE was specified when versioning was enabled. (If VIEW_WO_OVERWRITE was not specified for a table, history information for the table is deleted regardless of the parameter value.) FALSE is assumed if the procedure format without this parameter is used.

firstSP

First savepoint. Savepoint names are case sensitive.

If only workspace and firstSP are specified, all removable savepoints between workspace creation and firstSP (but not including firstSP) are deleted.

If workspace, firstSP, and secondSP are specified, all removable savepoints from firstSP (and including firstSP if it is a removable savepoint) to secondSP (but not including secondSP) are deleted.

If only workspace is specified (no savepoints), all removable savepoints in the workspace are deleted.

secondSP

Second savepoint. All removable savepoints from firstSP (and including firstSP if it is a removable savepoint) to secondSP (but not including secondSP) are deleted.

However, if secondSP is LATEST, all removable savepoints from firstSP (and including firstSP if it is a removable savepoint) to the end of the workspace are deleted.

Savepoint names are case sensitive.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.

commit_in_batches

A Boolean value (TRUE or FALSE).

TRUE causes an internal commit operation to be performed after compression operations on batch_size rows in version-enabled tables. Periodic commit operations can be useful or necessary if version-enabled tables have many rows affected by the compression, which can cause substantial Oracle database resources (such as rollback segments and undo tablespaces) to be used. If you specify TRUE, the auto_commit value must also be TRUE.

FALSE (the default) causes internal commit operations not to be performed during the compression operation.

batch_size

Batch size for internal commit operations if commit_in_batches is TRUE; otherwise, the parameter is ignored. If specified, must be TABLE or PRIMARY_KEY_RANGE.

TABLE causes an internal commit operation to be performed after compressing each version-enabled table that needs to be compressed.

PRIMARY_KEY_RANGE specifies that each table is divided into batches of different ranges of primary key values, and an internal commit operation is to be performed after compressing each batch of rows in each version-enabled table that needs to be compressed. You must previously have generated statistics on the first column of the primary key, such as by using the ANALYZE TABLE statement on the <table_name>_LT table associated with each affected version-enabled table. See the Usage Notes for more information. The following example generates histogram statistics:

ANALYZE TABLE cola_marketing_budget_lt ESTIMATE STATISTICS FOR COLUMNS SIZE 50 product_id;

remove_latest_deleted_rows

A Boolean value (TRUE or FALSE).

TRUE causes any LATEST row that has been deleted and that will not adversely affect conflict resolution to be removed, if workspace is LIVE. A value of TRUE is ignored for other workspaces.)

FALSE (the default) causes any LATEST row that has been deleted to be preserved.


Usage Notes

You can compress a workspace when the explicit savepoints (all or some of them) in the workspace are no longer needed. The compression operation is useful for the following reasons:

While this procedure is executing, the current workspace is frozen in NO_ACCESS mode, as explained in Section 1.1.5.

A workspace cannot be compressed if there are any sessions in the workspace (except for the LIVE workspace), or if any user has executed a GotoDate operation or a GotoSavepoint operation specifying a savepoint in the workspace.

If the procedure format without the compress_view_wo_overwrite parameter is used, a value of FALSE is assumed for the parameter.

For information about VIEW_WO_OVERWRITE and other history options, see the information about the EnableVersioning procedure.

If you expect to purge a subset of your historical data periodically, such as removing historical data older than one year, plan to create a savepoint at each expected deletion point on the day it occurs. For example, if you plan to purge 2005 historical data when it is a year old, you need to create a savepoint on January 1, 2006. Then, on January 1, 2007 you can call the CompressWorkspace procedure, specifying the workspace name and the January 1, 2006 savepoint, to delete all history that occurred before 2006.

To see if a version-enabled table can be compressed in primary key range batches, check the value of the BATCH_SIZE column in the WM_COMPRESS_BATCH_SIZES metadata view, which is described in Section 5.37.

To specify a batch_size value of PRIMARY_KEY_RANGE, you must first generate either histogram statistics (for columns of type NUMBER, INTEGER, DATE, TIMESTAMP, CHAR, or VARCHAR2) or general statistics (for columns of type NUMBER, INTEGER, DATE, or TIMESTAMP) on the first column of the primary key. The statement ANALYZE TABLE ... COMPUTE STATISTICS generates general statistics. If general but not histogram statistics are available for columns of type NUMBER, INTEGER, DATE, or TIMESTAMP, the Workspace Manager system parameter NUMBER_OF_COMPRESS_BATCHES is used to compute the number of batches when batch_size is specified as PRIMARY_KEY_RANGE. For more information about statistics, see Oracle Database Performance Tuning Guide.

An exception is raised if auto_commit is TRUE and an open transaction exists, or if the user does not have the privilege to access and merge changes in workspace.

To compress a workspace and all its descendant workspaces, use the CompressWorkspaceTree procedure.

Examples

The following example compresses NEWWORKSPACE.

EXECUTE DBMS_WM.CompressWorkspace ('NEWWORKSPACE');

The following example compresses NEWWORKSPACE, deleting all explicit savepoints between the creation of the workspace and the savepoint SP1.

EXECUTE DBMS_WM.CompressWorkspace ('NEWWORKSPACE', 'SP1');

The following example compresses NEWWORKSPACE, deleting the explicit savepoint SP1 and all explicit savepoints up to but not including SP2.

EXECUTE DBMS_WM.CompressWorkspace ('NEWWORKSPACE', 'SP1', 'SP2');

The following example compresses B_focus_1, accepts the default values for the firstSP and secondSP parameters (that is, deletes all explicit savepoints), and specifies FALSE for the auto_commit parameter.

EXECUTE DBMS_WM.CompressWorkspace ('B_focus_1', auto_commit => FALSE);

The following example analyzes the COLA_MARKETING_BUDGET_LT table to generate the necessary histogram statistics for the next statement, and then it compresses B_focus_1. The call to the CompressWorkspace procedure accepts the default values for the firstSP, secondSP, and auto_commit parameters; specifies TRUE for the commit_in_batches parameter; and specifies PRIMARY_KEY_RANGE for the batch_size parameter.

ANALYZE TABLE cola_marketing_budget_lt ESTIMATE STATISTICS FOR COLUMNS SIZE 50 product_id;
EXECUTE DBMS_WM.CompressWorkspace ('B_focus_1', NULL, NULL, NULL, TRUE, 'PRIMARY_KEY_RANGE');

CompressWorkspaceTree

Deletes removable savepoints in a workspace and all its descendant workspaces. (Removable savepoints are explained in Section 1.1.2.) It also minimizes the Workspace Manager metadata structures for the affected workspaces, and eliminates any redundant data that might arise from the deletion of the savepoints.

Syntax

DBMS_WM.CompressWorkspaceTree(
   workspace                   IN VARCHAR2,
   compress_view_wo_overwrite  IN BOOLEAN DEFAULT FALSE,
   auto_commit                 IN BOOLEAN DEFAULT TRUE,
   commit_in_batches           IN BOOLEAN DEFAULT FALSE,
   batch_size                  IN VARCHAR2 DEFAULT 'PRIMARY_KEY_RANGE',
   remove_latest_deleted_rows  IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-14 CompressWorkspaceTree Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

compress_view_wo_overwrite

A Boolean value (TRUE or FALSE).

TRUE causes history information to be deleted even if VIEW_WO_OVERWRITE was specified when versioning was enabled.

FALSE (the default) causes history information for a table not to be deleted if VIEW_WO_OVERWRITE was specified when versioning was enabled. (If VIEW_WO_OVERWRITE was not specified for a table, history information for the table is deleted regardless of the parameter value.)

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.

commit_in_batches

A Boolean value (TRUE or FALSE).

TRUE causes an internal commit operation to be performed after compression operations on batch_size rows in version-enabled tables. Periodic commit operations can be useful or necessary if version-enabled tables have many rows affected by the compression, which can cause substantial Oracle database resources (such as rollback segments and undo tablespaces) to be used. If you specify TRUE, the auto_commit value must also be TRUE.

FALSE (the default) causes internal commit operations not to be performed during the compression operation.

batch_size

Batch size for internal commit operations if commit_in_batches is TRUE; otherwise, the parameter is ignored. If specified, must be TABLE or PRIMARY_KEY_RANGE.

TABLE causes an internal commit operation to be performed after compressing each version-enabled table that needs to be compressed.

PRIMARY_KEY_RANGE (the default) specifies that each table is divided into batches of different ranges of primary key values, and an internal commit operation is to be performed after compressing each batch of rows in each version-enabled table that needs to be compressed. You must previously have generated statistics on the first column of the primary key, such as by using the ANALYZE TABLE statement on the <table_name>_LT table associated with each affected version-enabled table. See the Usage Notes for more information. The following example generates histogram statistics:

ANALYZE TABLE cola_marketing_budget_lt ESTIMATE STATISTICS FOR COLUMNS SIZE 50 product_id;

remove_latest_deleted_rows

A Boolean value (TRUE or FALSE).

TRUE causes any LATEST row that has been deleted and that will not adversely affect conflict resolution to be removed, if workspace is LIVE. A value of TRUE is ignored for other values of the workspace parameter.)

FALSE (the default) causes any LATEST row that has been deleted to be preserved.


Usage Notes

You can compress a workspace and all its descendant workspaces when the explicit savepoints in the affected workspaces are no longer needed (for example, if you will not need to go to or roll back to any of these savepoints). For example, in the hierarchy shown in Figure 1-1 in Section 1.1.1, a CompressWorkspaceTree operation specifying Workspace1 compresses Workspace1, Workspace2, and Workspace3. (For an explanation of database workspace hierarchy, see Section 1.1.1.)

The compression operation is useful for the following reasons:

While this procedure is executing, the current workspace is frozen in NO_ACCESS mode, as explained in Section 1.1.5.

A workspace cannot be compressed if there are any sessions in the workspace (except for the LIVE workspace), or if any user has executed a GotoDate operation or a GotoSavepoint operation specifying a savepoint in the workspace.

To see if a version-enabled table can be compressed in primary key range batches, check the value of the BATCH_SIZE column in the WM_COMPRESS_BATCH_SIZES metadata view, which is described in Section 5.37.

To specify a batch_size value of PRIMARY_KEY_RANGE, you must first generate either histogram statistics (for columns of type NUMBER, INTEGER, DATE, TIMESTAMP, CHAR, or VARCHAR2) or general statistics (for columns of type NUMBER, INTEGER, DATE, or TIMESTAMP) on the first column of the primary key. The statement ANALYZE TABLE ... COMPUTE STATISTICS generates general statistics. If general but not histogram statistics are available for columns of type NUMBER, INTEGER, DATE, or TIMESTAMP, the Workspace Manager system parameter NUMBER_OF_COMPRESS_BATCHES is used to compute the number of batches when batch_size is specified as PRIMARY_KEY_RANGE. For more information about statistics, see Oracle Database Performance Tuning Guide.

An exception is raised if auto_commit is TRUE and an open transaction exists, or if the user does not have the privilege to access and merge changes in workspace.

If the CompressWorkspaceTree operation fails in any affected workspace, the entire operation is rolled back, and no workspaces are compressed.

To compress a single workspace (deleting all explicit savepoints or just some of them), use the CompressWorkspace procedure.

Examples

The following example compresses NEWWORKSPACE and all its descendant workspaces.

EXECUTE DBMS_WM.CompressWorkspaceTree ('NEWWORKSPACE');

The following example compresses NEWWORKSPACE and all its descendant workspaces, accepts the default value for the compress_view_wo_overwrite parameter, and specifies FALSE for the auto_commit parameter.

EXECUTE DBMS_WM.CompressWorkspaceTree ('NEWWORKSPACE', auto_commit => FALSE);

The following example compresses NEWWORKSPACE and all its descendant workspaces; accepts the default value for the compress_view_wo_overwrite and auto_commit parameters; specifies TRUE for the commit_in_batches parameter; and specifies PRIMARY_KEY_RANGE for the batch_size parameter.

EXECUTE DBMS_WM.CompressWorkspaceTree ('NEWWORKSPACE', NULL, NULL, TRUE, 'PRIMARY_KEY_RANGE');

CopyForUpdate

Allows LOB columns (BLOB, CLOB, or NCLOB) in version-enabled tables to be modified. Use this procedure only if a version-enabled table has any LOB columns.

Syntax

DBMS_WM.CopyForUpdate(
   table_name    IN VARCHAR2,
   where_clause  IN VARCHAR2 DEFAULT '');

Parameters

Table 4-15 CopyForUpdate Procedure Parameters

Parameter Description
table_name

Name of the table containing one or more LOB columns. The name is not case sensitive.

where_clause

The WHERE clause (excluding the WHERE keyword) identifying the rows affected. Example: 'department_id = 20'

Only primary key columns can be specified in the WHERE clause, except in a subquery. The subquery can refer to columns that are not primary keys, but it cannot refer to a version-enabled table.

If the where_clause parameter is not specified, all rows in table_name are affected.


Usage Notes

This procedure is intended for use only with version-enabled tables containing one or more large object (LOB) columns. The CopyForUpdate procedure must be used because updates performed using the DBMS_LOB package do not fire INSTEAD OF triggers on the versioning views. Workspace Manager creates INSTEAD OF triggers on the versioning views to implement the copy-on-write semantics. (For non-LOB columns, you can directly perform the update operation, and the triggers work.)

Examples

The following example updates the SOURCE_CLOB column of TABLE1 for the document with DOC_ID = 1.

Declare 
    clob_var 
  Begin
     /* This procedure copies the LOB columns if necessary, that is, 
        if the row with doc_id = 1 has not been versioned in the 
        current version */
     dbms_wm.copyForUpdate('table1', 'doc_id = 1');

     select source_clob into clob_var
     from   table1
     where  doc_id = 1 for update;

     dbms_lob.write(clob_var,<amount>, <offset>, buff);

  End;

CreateSavepoint

Creates a savepoint for the current version.

Syntax

DBMS_WM.CreateSavepoint(
   workspace       IN VARCHAR2,
   savepoint_name  IN VARCHAR2,
   description     IN VARCHAR2 DEFAULT NULL,
   auto_commit     IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-16 CreateSavepoint Procedure Parameters

Parameter Description
workspace

Name of the workspace in which to create the savepoint. The name is case sensitive.

savepoint_name

Name of the savepoint to be created. The name is case sensitive.

description

Description of the savepoint to be created.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

There are no explicit privileges associated with savepoints; any user who can access a workspace can create a savepoint in the workspace.

This procedure can be performed while there are users in the workspace; there can be open database transactions.

While this procedure is executing, the current workspace is frozen in READ_ONLY mode, as explained in Section 1.1.5.

An exception is raised if one or more of the following apply:

Examples

The following example creates a savepoint named Savepoint1 in the NEWWORKSPACE workspace.

EXECUTE DBMS_WM.CreateSavepoint ('NEWWORKSPACE', 'Savepoint1');

CreateWorkspace

Creates a new workspace in the database.

Syntax

DBMS_WM.CreateWorkspace(
   workspace    IN VARCHAR2,
   description  IN VARCHAR2 DEFAULT NULL,
   auto_commit  IN BOOLEAN DEFAULT TRUE);

or

DBMS_WM.CreateWorkspace(
   workspace    IN VARCHAR2,
   isrefreshed  IN BOOLEAN,
   description  IN VARCHAR2 DEFAULT NULL,
   auto_commit  IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-17 CreateWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive, and it must be unique (no other workspace of the same name).

isrefreshed

A Boolean value (TRUE or FALSE).

TRUE causes the workspace to be continually refreshed. In a continually refreshed workspace (described in Section 1.1.9), changes made in the parent workspace are automatically applied to the workspace whenever data changes are committed in the parent workspace or are merged into the parent workspace from another child workspace. That is, you do not need to call the RefreshWorkspace procedure to apply the changes. See the Usage Notes for more information about continually refreshed workspaces.

FALSE causes the workspace not to be continually refreshed. To refresh the workspace, you must call the RefreshWorkspace procedure.

If you use the syntax without the isrefreshed parameter, the workspace is not continually refreshed.

description

Description of the workspace.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

The new workspace is a child of the current workspace. If the session has not explicitly entered a workspace, it is in the LIVE database workspace, and the new workspace is a child of the LIVE workspace. For an explanation of database workspace hierarchy, see Section 1.1.1.

An implicit savepoint is created in the current version of the current workspace. (The current version does not have to be the latest version in the current workspace.) For an explanation of savepoints (explicit and implicit), see Section 1.1.2.

While this procedure is executing, the current workspace is frozen in READ_ONLY mode, as explained in Section 1.1.5.

This procedure does not implicitly go to the workspace created. To go to the workspace, use the GotoWorkspace procedure.

The following rules apply to continually refreshed workspaces (isrefreshed value of TRUE):

An exception is raised if one or more of the following apply:

Examples

The following example creates a workspace named NEWWORKSPACE in the database.

EXECUTE DBMS_WM.CreateWorkspace ('NEWWORKSPACE');

Delete_Topo_Geometry_Layer

Deletes a topology geometry layer from a topology.

Format

DBMS_WM.Delete_Topo_Geometry_Layer(

     topology IN VARCHAR2,

     table_name IN VARCHAR2,

     column_name IN VARCHAR2);

Parameters

Table 4-18 Delete_Topo_Geometry_Layer Procedure Parameters

Parameter Description
topology

Topology from which to delete the topology geometry layer containing the topology geometries in the specified column. The topology must have been created using the SDO_TOPO.CREATE_TOPOLOGY procedure.

table_name

Name of the topology geometry layer table containing the column specified in column_name.

column_name

Name of the column (of type SDO_TOPO_GEOMETRY) containing the topology geometries in the topology geometry layer to be deleted from the topology.


Usage Notes

This procedure has the same format and meaning as the SDO_TOPO.DELETE_TOPO_GEOMETRY_LAYER procedure, which is documented in Oracle Spatial Topology and Network Data Models. However, you must use DBMS_WM.Delete_Topo_Geometry_Layer, and not SDO_TOPO.DELETE_TOPO_GEOMETRY_LAYER, to delete a topology geometry layer from a version-enabled feature table from a topology. For information about Workspace Manager support for topologies, see Section 1.14.

This procedure deletes data associated with the specified topology geometry layer from the edge, node, and face tables (described in Oracle Spatial Topology and Network Data Models).

An exception is generated if topology or table_name is not version-enabled, or if table_name is the only feature table in topology.

Examples

The following example deletes the topology geometry layer that is based on the geometries in the FEATURE column of the LAND_PARCELS table from the topology named CITY_DATA.

EXECUTE DBMS_WM.Delete_Topo_Geometry_Layer('CITY_DATA', 'LAND_PARCELS', 'FEATURE');

DeleteSavepoint

Deletes a savepoint and associated rows in version-enabled tables.

Syntax

DBMS_WM.DeleteSavepoint(
   workspace                   IN VARCHAR2,
   savepoint_name              IN VARCHAR2,
   compress_view_wo_overwrite  IN BOOLEAN DEFAULT FALSE,
   auto_commit                 IN BOOLEAN DEFAULT TRUE,
   commit_in_batches           IN BOOLEAN DEFAULT FALSE,
   batch_size                  IN VARCHAR2 DEFAULT 'PRIMARY_KEY_RANGE');

Parameters

Table 4-19 DeleteSavepoint Procedure Parameters

Parameter Description
workspace

Name of the workspace in which the savepoint was created. The name is case sensitive.

savepoint_name

Name of the savepoint to be deleted. The name is case sensitive.

compress_view_wo_overwrite

A Boolean value (TRUE or FALSE).

TRUE causes history information to be deleted even if VIEW_WO_OVERWRITE was specified when versioning was enabled.

FALSE (the default) causes history information for a table not to be deleted if VIEW_WO_OVERWRITE was specified when versioning was enabled. (If VIEW_WO_OVERWRITE was not specified for a table, history information for the table is deleted regardless of the parameter value.)

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.

commit_in_batches

A Boolean value (TRUE or FALSE).

TRUE causes an internal commit operation to be performed after compression operations on batch_size rows in version-enabled tables. Periodic commit operations can be useful or necessary if version-enabled tables have many rows affected by the savepoint deletion, which can cause substantial Oracle database resources (such as rollback segments and undo tablespaces) to be used. If you specify TRUE, the auto_commit value must also be TRUE.

FALSE (the default) causes internal commit operations not to be performed during the savepoint deletion operation.

batch_size

Batch size for internal commit operations if commit_in_batches is TRUE; otherwise, the parameter is ignored. If specified, must be TABLE or PRIMARY_KEY_RANGE.

TABLE causes an internal commit operation to be performed after compressing each version-enabled table that needs to be compressed.

PRIMARY_KEY_RANGE specifies that each table is divided into batches of different ranges of primary key values, and an internal commit operation is to be performed after compressing each batch of rows in each version-enabled table that needs to be compressed. You must previously have generated statistics on the first column of the primary key, such as by using the ANALYZE TABLE statement on the <table_name>_LT table associated with each affected version-enabled table. See the Usage Notes for more information. The following example generates histogram statistics:

ANALYZE TABLE cola_marketing_budget_lt ESTIMATE STATISTICS FOR COLUMNS SIZE 50 product_id;


Usage Notes

You can delete a savepoint when it is no longer needed (for example, you will not need to go to it or roll back to it).

Deleting a savepoint is useful for the following reasons:

While this procedure is executing, the current workspace is frozen in NO_ACCESS mode, as explained in Section 1.1.5.

To delete a savepoint, you must have the WM_ADMIN_ROLE role or be the owner of the workspace or the savepoint.

This procedure cannot be executed if there are any sessions with an open database transaction, or if any user has executed a GotoDate operation or a GotoSavepoint operation specifying a savepoint in the workspace.

To specify a batch_size value of PRIMARY_KEY_RANGE, you must first generate either histogram statistics (for columns of type NUMBER, INTEGER, DATE, TIMESTAMP, CHAR, or VARCHAR2) or general statistics (for columns of type NUMBER, INTEGER, DATE, or TIMESTAMP) on the first column of the primary key. The statement ANALYZE TABLE ... COMPUTE STATISTICS generates general statistics. If general but not histogram statistics are available for columns of type NUMBER, INTEGER, DATE, or TIMESTAMP, the Workspace Manager system parameter NUMBER_OF_COMPRESS_BATCHES is used to compute the number of batches when batch_size is specified as PRIMARY_KEY_RANGE. For more information about statistics, see Oracle Database Performance Tuning Guide.

An exception is raised if one or more of the following apply:

Examples

The following example deletes a savepoint named Savepoint1 in the NEWWORKSPACE workspace.

EXECUTE DBMS_WM.DeleteSavepoint ('NEWWORKSPACE', 'Savepoint1');

DisableVersioning

Deletes all support structures that were created to enable the table to support versioned rows.

Syntax

DBMS_WM.DisableVersioning(
   table_name         IN VARCHAR2,
   force              IN BOOLEAN DEFAULT FALSE,
   ignore_last_error  IN BOOLEAN DEFAULT FALSE,
   isTopology         IN BOOLEAN DEFAULT FALSE,
   keepWMValid        IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-20 DisableVersioning Procedure Parameters

Parameter Description
table_name

Name of the table or (if isTopology is TRUE) Oracle Spatial topology, or a comma-delimited list of names of tables related by multilevel referential integrity constraints. (Multilevel referential integrity constraints are explained in Section 1.9.1.) Table names are not case sensitive.

force

A Boolean value (TRUE or FALSE).

TRUE forces all data in workspaces other than LIVE to be discarded before versioning is disabled.

FALSE (the default) prevents versioning from being disabled if table_name was modified in any workspace other than LIVE and if the workspace that modified table_name still exists.

ignore_last_error

A Boolean value (TRUE or FALSE).

TRUE ignores the last error, if any, that occurred during the previous call to the DisableVersioning procedure. Information about the last error is stored in the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views, which are described in Chapter 5. See the Usage Notes for more information.

FALSE (the default) does not ignore the last error, if any, that occurred during the previous call to the DisableVersioning procedure.

isTopology

A Boolean value (TRUE or FALSE).

TRUE indicates that the value specified for the table_name parameter is the name of an Oracle Spatial topology (not a database table name), as explained in Section 1.14.

FALSE (the default) indicates that the value specified for the table_name parameter is not an Oracle Spatial topology name.

keepWMValid

A Boolean value (TRUE or FALSE). Applies only if valid time support (described in Chapter 3) has been enabled for the table.

TRUE (the default) causes the WM_VALID column and all data in that column to be kept in the table after the procedure completes.

FALSE causes the WM_VALID column to be dropped and all data in that column deleted as a result of the procedure. Only the current row for each primary key value is kept.


Usage Notes

This procedure is used to reverse the effect of the EnableVersioning procedure. It deletes the Workspace Manager infrastructure (support structures) for versioning of rows, but does not affect any user data in the LIVE workspace. The workspace hierarchy and any savepoints still exist, but all rows are the same as in the LIVE workspace. (If there are multiple versions in the LIVE workspace of a row in the table for which versioning is disabled, only the most recent version of the row is kept.)

If table_name has valid time support (described in Chapter 3), this procedure deletes the WM_VALID column and all data in that column. If deleting the WM_VALID column would cause a primary key constraint violation, only the row valid at the current time is retained.

If a call to the DisableVersioning procedure fails, the table is left in an inconsistent state. If this occurs, you should try to fix the cause of the error (examine the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views to see the SQL statement and error message), and then call the DisableVersioning procedure again with the default ignore_last_error parameter value of FALSE. However, if the call still fails and you cannot fix the cause of the error, and if you are sure that it is safe and appropriate to ignore this error, then you have the option to ignore the error by calling the DisableVersioning procedure with the ignore_last_error parameter value of TRUE. Note that you are responsible for ensuring that it is safe and appropriate to ignore the error.

Some causes for the failure of the DisableVersioning procedure include the following:

The DisableVersioning operation fails if the force value is FALSE and any of the following apply:

Only the owner of a table or a user with the WM_ADMIN_ROLE role can disable versioning on the table.

Tables that are version-enabled and users that own version-enabled tables cannot be deleted. You must first disable versioning on the relevant table or tables.

An exception is raised if the table is not version-enabled.

If you want to disable versioning on a table in an Oracle replication environment, see Section C.2 for guidelines and other information.

For information about Workspace Manager support for tables in an Oracle Spatial topology, see Section 1.14.

Examples

The following example disables the EMPLOYEE table for versioning.

EXECUTE DBMS_WM.DisableVersioning ('employee');

The following example disables the EMPLOYEE table for versioning and ignores the last error that occurred during the previous call to the DisableVersioning procedure.

EXECUTE DBMS_WM.DisableVersioning ('employee', ignore_last_error => true);

The following example disables the EMPLOYEE, DEPARTMENT, and LOCATION tables (which have multilevel referential integrity constraints) for versioning.

EXECUTE DBMS_WM.DisableVersioning('employee,department,location');

DropReplicationSupport

Deletes replication support objects that were created by the GenerateReplicationSupport procedure.

Syntax

DBMS_WM.DropReplicationSupport();

Parameters

None.

Usage Notes

To use this procedure, you must understand how replication applies to Workspace Manager objects, as explained in Appendix C. You must also understand the major Oracle replication concepts and techniques, which are documented in Oracle Database Advanced Replication and Oracle Database Advanced Replication Management API Reference.

You must execute this procedure as the replication administrator user at the writer site.

This procedure drops replication support for any version-enabled tables at the nonwriter sites; however, it does not version-disable any version-enabled tables.

Examples

The following example drops replication support that had previously been enabled using the GenerateReplicationSupport procedure.

DBMS_WM.DropReplicationSupport();

EnableVersioning

Version-enables a table, creating the necessary structures to enable the table to support multiple versions of rows.

Syntax

DBMS_WM.EnableVersioning(
   table_name  IN VARCHAR2,
   hist        IN VARCHAR2 DEFAULT 'NONE',
   isTopology  IN BOOLEAN DEFAULT FALSE,
   validTime   IN BOOLEAN DEFAULT FALSE,
   undo_space  IN VARCHAR2 DEFAULT NULL);

Parameters

Table 4-21 EnableVersioning Procedure Parameters

Parameter Description
table_name

Name of the table or (if isTopology is TRUE) Oracle Spatial topology, or a comma-delimited list of names of tables related by multilevel referential integrity constraints. (Multilevel referential integrity constraints are explained in Section 1.9.1.) The length of a table name must not exceed 25 characters. The table must not contain any columns with names that start with WM_ or WM$. The table name is not case sensitive.

hist

History option, for tracking modifications to table_name. Must be one of the following values:

NONE: No modifications to the table are tracked. (This is the default.)

VIEW_W_OVERWRITE: The with overwrite (W_OVERWRITE) option. A view named <table_name>_HIST (described in Section 5.44) is created to contain history information, but it will show only the most recent modifications to the same version of the table. A history of modifications to the version is not maintained; that is, subsequent changes to a row in the same version overwrite earlier changes. (The CREATETIME column of the <table_name>_HIST view contains only the time of the most recent update.)

VIEW_WO_OVERWRITE: The without overwrite (WO_OVERWRITE) option. A view named <table_name>_HIST (described in Section 5.44) is created to contain history information, and it will show all modifications to the same version of the table. A history of modifications to the version is maintained; that is, subsequent changes to a row in the same version do not overwrite earlier changes.

isTopology

A Boolean value (TRUE or FALSE).

TRUE indicates that the value specified for the table_name parameter is the name of an Oracle Spatial topology (not a database table name), as explained in Section 1.14.

FALSE (the default) indicates that the value specified for the table_name parameter is not an Oracle Spatial topology name.

validTime

A Boolean value (TRUE or FALSE).

TRUE causes valid time support to be included. Workspace Manager valid time support is explained in Chapter 3.

FALSE (the default) causes valid time support not to be included.

undo_space

A string containing UNLIMITED (for no specified limit) or a number representing the maximum number of bytes for undo space available for the version-enable operation. Example: '1048576' for 1 megabyte. Any value specified overrides the value of the UNDO_SPACE Workspace Manager system parameter (described in Section 1.5).


Usage Notes

The table that is being version-enabled must have a primary key defined. The primary key can be a composite (multicolumn) primary key.

Only the owner of a table or a user with the WM_ADMIN role can enable versioning on the table.

Tables that are version-enabled and users that own version-enabled tables cannot be deleted. You must first disable versioning on the relevant table or tables.

Tables owned by SYS cannot be version-enabled.

An exception is raised if one or more of the following apply:

If the table is version-enabled with the VIEW_WO_OVERWRITE hist option specified, this option can later be disabled and re-enabled by calling the SetWoOverwriteOFF and SetWoOverwriteON procedures.

The history option enables you to log and audit modifications.

The history option affects the behavior of the GotoDate procedure. See the Usage Notes for that procedure.

If you expect to purge a subset of your historical data periodically, such as removing historical data older than one year, plan to create a savepoint at each expected deletion point on the day it occurs. For example, if you plan to purge 2005 historical data when it is a year old, you need to create a savepoint on January 1, 2006. Then, on January 1, 2007 you can call the CompressWorkspace procedure, specifying the workspace name and the January 1, 2006 savepoint, to delete all history that occurred before 2006

If you want to version-enable a table in an Oracle replication environment, see Section C.2 for guidelines and other information.

For information about Workspace Manager support for tables in an Oracle Spatial topology, see Section 1.14.

Current notes and restrictions include the following:

Examples

The following example enables versioning on the EMPLOYEE table.

EXECUTE DBMS_WM.EnableVersioning('employee');

The following example enables versioning on the EMPLOYEE, DEPARTMENT, and LOCATION tables, which have multilevel referential integrity constraints.

EXECUTE DBMS_WM.EnableVersioning('employee,department,location');

Export

Exports data from a version-enabled table (all rows, or as limited by any combination of several parameters) to a staging table.

Syntax

DBMS_WM.Export(
   table_name          IN VARCHAR2,
   staging_table       IN VARCHAR2,
   workspace           IN VARCHAR2,
   where_clause        IN VARCHAR2 DEFAULT NULL,
   export_scope        IN VARCHAR2 DEFAULT DBMS_WM.EXPORT_MODIFIED_DATA_ONLY,
   after_savepoint_name  IN VARCHAR2 DEFAULT NULL,
   as_of_savepoint_name  IN VARCHAR2 DEFAULT NULL,
   after_instant       IN DATE DEFAULT NULL,
   as_of_instant       IN DATE DEFAULT NULL,
   versioned_db        IN BOOLEAN DEFAULT TRUE,
   overwrite_existing_data  IN BOOLEAN DEFAULT FALSE,
   auto_commit         IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-22 Export Procedure Parameters

Parameter Description
table_name

Name of the table containing the data to be exported. The name is not case sensitive.

staging_table

Name of the table to hold the exported data. The name is not case sensitive. If the table does not exist, a new table with this name is created, with a structure suitable for Workspace Manager export and import operations. (See the Usage Notes for more information about the staging table.)

workspace

Name of the workspace from which to export the data. The name is case sensitive.

where_clause

The WHERE clause (excluding the WHERE keyword) identifying the rows to be exported. Example: 'department_id = 20'

Only primary key columns can be specified in the WHERE clause, except in a subquery. The subquery can refer to columns that are not primary keys, but it cannot refer to a version-enabled table.

If the where_clause parameter is not specified, all rows in table_name are exported.

export_scope

The scope (amount of data) for the export operation.

DBMS_WM.EXPORT_ALL_DATA exports all relevant data in workspace.

DBMS_WM.EXPORT_MODIFIED_DATA_ONLY (the default) exports only relevant data that was inserted, updated, or deleted in workspace.

after_savepoint_name

Name of a savepoint: only data inserted, updated, or deleted after this savepoint is exported.

If you do not specify after_savepoint_name or as_of_savepoint_name, savepoints are ignored in determining the data to be exported.

See the Usage Notes for guidelines relating to the savepoint-related and instant-related parameters.

as_of_savepoint_name

Name of a savepoint: only data in the workspace at the time the savepoint was created is exported.

If you do not specify after_savepoint_name or as_of_savepoint_name, savepoints are ignored in determining the data to be exported.

See the Usage Notes for guidelines relating to the savepoint-related and instant-related parameters.

after_instant

Date/time specification: only data inserted, updated, or deleted after this time is exported.

If you do not specify after_instant or as_of_instant, time is ignored in determining the data to be exported.

See the Usage Notes for guidelines relating to the savepoint-related and instant-related parameters.

as_of_instant

Date/time specification: only data that was in the workspace at this time is exported.

If you do not specify after_instant or as_of_instant, time is ignored in determining the data to be exported.

See the Usage Notes for guidelines relating to the savepoint-related and instant-related parameters.

versioned_db

A Boolean value (TRUE or FALSE).

TRUE (the default) creates a staging table that contains versioning information.

FALSE creates a staging table that contains only user-defined columns and user-visible data.

overwrite_existing_data

A Boolean value (TRUE or FALSE).

TRUE overwrites existing data in the staging table with the data that is exported.

FALSE (the default) preserves all existing data in the staging table, and raises an exception if the exported data conflicts with the existing data.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

All data that satisfies the where_clause in the version-enabled table table_name, the export_scope parameter, and any parameters relating to a time or a savepoint in workspace is exported to the staging table (staging_table parameter).

Each row of data to be exported is considered to be one of the following: inserted, updated, or deleted in workspace (that is, modified data); or data that was not modified in workspace but can be seen in it (that is, ancestor data). If data is exported from the LIVE workspace, it is all modified data. If a workspace is created and no data has yet been versioned in it, and the Export procedure is called, all the data is ancestor data.

The first time you export data from a version-enabled table, the staging table should not exist; that is, do not try to create a staging table, but let the procedure create one for you using the name specified for the staging_table parameter. The staging table will contain all columns in the original table (table_name parameter), plus some columns for use by Workspace Manager.

After the staging table is created, you can use it for subsequent export operations from the original table, as long as you have not done any of the following DDL operations on the original table: altered any column names or data types, or modified or deleted the primary key constraint. If you have made any of these alterations to the original table, drop the staging table before you call the Export procedure, so that Workspace Manager can create a new staging table. (If you want to overwrite data in an existing staging table, you must also specify overwrite_existing_data as TRUE.)

The staging table must be in the current user's schema; or if it is in another schema, the current user must have the CREATE ANY TABLE and INSERT ANY TABLE privileges.

It is recommended that you specify no more than one of the following savepoint-related and instant-related parameters: after_savepoint_name, as_of_savepoint_name, after_instant, as_of_instant. If you specify after_savepoint_name and after_instant, the interaction of the two parameters can have complex results. You cannot specify the following parameter combinations: after_savepoint_name and as_of_savepoint_name, after_instant and as_of_instant, or as_of_savepoint_name and as_of_instant.

An exception is raised if one or more of the following apply:

Examples

The following example exports all data from the COLA_MARKETING_BUDGET table in workspace B_Focus_2 into the staging table COLA_MARKETING_BUDGET_STG. (The EXECUTE statement is actually on a single line.)

EXECUTE DBMS_WM.Export(table_name => 'COLA_MARKETING_BUDGET', staging_table => 'COLA_MARKETING_BUDGET_STG', workspace => 'B_focus_2');

FindRICSet

Finds tables that need to be version-enabled along with a specified table, due to referential integrity constraint relationships.

Syntax

DBMS_WM.FindRICSet(
   table_name    IN VARCHAR2,
   result_table  IN VARCHAR2);

Parameters

Table 4-23 FindRICSet Procedure Parameters

Parameter Description
table_name

Name of the table for which to find all other tables that will need to be version-enabled along with it, because of referential integrity constraint relationships. The name is not case sensitive.

result_table

Name of the table to hold the results. The name is not case sensitive.

This table must have two columns, TABLE_OWNER and TABLE_NAME, both of type VARCHAR2. If the table does not exist, a new table with this name and the required columns is created.


Usage Notes

Workspace Manager has several considerations relating to referential integrity constraints, as explained in Section 1.9.1. Sometimes, before you can version-enable a table, you must version-enable other tables that are in referential integrity constraints affecting the table. The FindRICSet procedure lets you find all these other tables.

To display the results, use the SET SERVEROUTPUT ON statement before calling this procedure.

If the result table is not in the current user's schema, the following requirements apply:

An exception is raised if one or more of the following apply:

Examples

The following example creates two tables, EMPLOYEES and DEPARTMENTS, where DEPARTMENTS.MANAGER_ID has a foreign key relationship referencing EMPLOYEES.EMPLOYEE_ID. The example then finds all tables that would need to be version-enabled if EMPLOYEES and DEPARTMENTS were version-enabled.

The results show that is you want to version-enable the EMPLOYEES table, you must version-enable both the EMPLOYEES and DEPARTMENTS tables; but if you want to version-enable the DEPARTMENTS table, you do not need to version-enable any other tables.

create table employees (employee_id number primary key, employee_name varchar2(30));
create table departments (dept_id number primary key, manager_id number references employees(employee_id));

-- Check RICs; result table does not already exist.
EXECUTE DBMS_WM.FindRICSet('EMPLOYEES', 'EMPLOYEES_RESULTS');
SELECT * FROM employees_results;

TABLE_OWNER                    TABLE_NAME                                       
------------------------------ ------------------------------                   
WM_DEVELOPER                   EMPLOYEES                                        
WM_DEVELOPER                   DEPARTMENTS                                      

EXECUTE DBMS_WM.FindRICSet('DEPARTMENTS', 'DEPARTMENTS_RESULTS');
SELECT * FROM departments_results;

TABLE_OWNER                    TABLE_NAME                                       
------------------------------ ------------------------------                   
WM_DEVELOPER                   DEPARTMENTS 

FreezeWorkspace

Restricts access to a workspace and the ability of users to make changes in the workspace.

Syntax

DBMS_WM.FreezeWorkspace(
   workspace     IN VARCHAR2,
   freezemode    IN VARCHAR2 DEFAULT 'NO_ACCESS',
   freezewriter  IN VARCHAR2 DEFAULT NULL,
   force         IN BOOLEAN DEFAULT FALSE);

or

DBMS_WM.FreezeWorkspace(
   workspace         IN VARCHAR2,
   session_duration  IN BOOLEAN,
   freezemode        IN VARCHAR2 DEFAULT 'NO_ACCESS',
   freezewriter      IN VARCHAR2 DEFAULT NULL,
   force             IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-24 FreezeWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

session_duration

A Boolean value (TRUE or FALSE).

TRUE causes the workspace to be unfrozen when the session that called the FreezeWorkspace procedure disconnects from the database. This value is valid for all freeze modes.

FALSE causes the workspace not to be unfrozen when the session that called the FreezeWorkspace procedure disconnects from the database.

freezemode

Mode for the frozen workspace. Must be one of the following values:

NO_ACCESS: No sessions are allowed in the workspace. (This is the default.)

READ_ONLY: Sessions are allowed in the workspace, but no write operations (insert, update, delete) are allowed.

1WRITER: Sessions are allowed in the workspace, but only one user (see the freezewriter parameter) is allowed to perform write operations (insert, update, delete).

1WRITER_SESSION: Sessions are allowed in the workspace, but only the database session (as opposed to the database user) that called the FreezeWorkspace procedure is allowed to perform write operations (insert, update, delete). The workspace is unfrozen after the session that called the FreezeWorkspace procedure disconnects from the database.

WM_ONLY: Only Workspace Manager operations are permitted. No sessions can directly modify data values; however, child workspaces can be merged into the workspace, and savepoints can be created in the workspace.

freezewriter

The user that is allowed to make changes in the workspace. Can be specified only if freezemode is 1WRITER. The default is USER (the current user).

force

A Boolean value (TRUE or FALSE).

TRUE forces the workspace to be frozen even if it is already frozen. For example, this value lets you freeze the workspace with a different freezemode parameter value without having first to call the UnfreezeWorkspace procedure.

FALSE (the default) prevents the workspace from being frozen if it is already frozen.


Usage Notes

If you specify the procedure syntax that does not include the session_duration parameter, it is equivalent to specifying FALSE for that parameter: that is, the workspace is not unfrozen when the session that called the FreezeWorkspace procedure disconnects from the database.

The operation fails if one or more of the following apply:

If freezemode is READ_ONLY or 1WRITER, the workspace cannot be frozen if there is an active database transaction.

You can freeze a workspace only if one or more of the following apply:

The LIVE workspace can be frozen only if freezemode is READ_ONLY or 1WRITER.

To reverse the effect of FreezeWorkspace, use the UnfreezeWorkspace procedure.

Examples

The following example freezes the NEWWORKSPACE workspace.

EXECUTE DBMS_WM.FreezeWorkspace ('NEWWORKSPACE');

GenerateReplicationSupport

Creates necessary structures for multimaster replication of Workspace Manager objects, and starts the master activity for the newly created master group.

Syntax

DBMS_WM.GenerateReplicationSupport(
   mastersites       IN VARCHAR2,
   groupname         IN VARCHAR2,
   groupdescription  IN VARCHAR2 DEFAULT 'Replication Group for OWM');

Parameters

Table 4-25 GenerateReplicationSupport Procedure Parameters

Parameter Description
mastersites

Comma-delimited list of nonwriter site names (database links) to be added to the Workspace Manager replication environment. Do not include the local site (the writer site) in the list.

groupname

Name of the master group to be created. This group will appear as a regular replication master group, and it can be managed from all the Oracle replication interfaces, including Oracle Enterprise Manager.

groupdescription

Description of the new master group. The default is Replication Group for OWM.


Usage Notes

To use this procedure, you must understand how replication applies to Workspace Manager objects, as explained in Appendix C. You must also understand the major Oracle replication concepts and techniques, which are documented in Oracle Database Advanced Replication and Oracle Database Advanced Replication Management API Reference.

You must execute this procedure as the replication administrator user at the writer site.

Before executing this procedure, ensure that the following are true:

This procedure performs the following operations:

To drop replication support for the Workspace Manager environment, use the DropReplicationSupport procedure.

Examples

The following example generates replication support for the Workspace Manager environment at a hypothetical company.

DBMS_WM.GenerateReplicationSupport(
    mastersites       =>  'BACKUP-SITE1.ACME.COM, BACKUP-SITE2.ACME.COM');
    groupname         =>  'OWM-GROUP',
    groupdescription  =>  'OWM Replication group for Acme Corp.');

GetBulkLoadVersion

Returns a version number to be specified in the call to the BeginBulkLoading procedure and in the SQL*Loader control file.

Format

DBMS_WM.GetBulkLoadVersion(
   workspace      IN VARCHAR2,
   savepoint_var  IN DEFAULT LATEST) RETURN INTEGER;

Parameters

Table 4-26 GetBulkLoadVersion Function Parameters

Parameter Description
workspace

Name of the workspace for which to return the list of bulk load version. The name is case sensitive.

savepoint_var

The version in the workspace in which data will be bulk loaded. Must be one of the following: LATEST or ROOT_VERSION.

LATEST (the default) is the current version in the workspace.

ROOT_VERSION is into the root version (version number 0, which is in the LIVE workspace). The root version is the ancestor of all other versions, so data in the root version is visible from all other workspaces (unless non-LIVE workspaces have updated the data). You can specify ROOT_VERSION only if workspace is LIVE.


Usage

Before you can begin bulk loading data into a version-enabled table, you must call the GetBulkLoadVersion and BeginBulkLoading procedures. You must end the bulk loading session by calling either the CommitBulkLoading procedure (to commit changes made when the data was loaded) or the RollbackBulkLoading procedure (to roll back changes made when the data was loaded). For more information about bulk loading with Workspace Manager, see Section 1.7.

An exception is raised if one or more of the following apply:

Examples

The following example gets a bulk load version number for the W1 workspace, and starts the bulk load operation into the EMP table in that workspace.

DECLARE
  version INTEGER;
BEGIN
  SELECT DBMS_WM.GetBulkLoadVersion ('W1') INTO version FROM DUAL;
  DBMS_WM.BeginBulkLoading ('EMP', 'W1', version);
END;
/

GetConflictWorkspace

Returns the name of the workspace on which the session has performed the SetConflictWorkspace procedure.

Format

DBMS_WM.GetConflictWorkspace() RETURN VARCHAR2;

Parameters

None.

Usage Notes

If the SetConflictWorkspace procedure has not been executed, the name of the current workspace is returned.

Examples

The following example displays the name of the workspace on which the session has performed the SetConflictWorkspace procedure.

SELECT DBMS_WM.GetConflictWorkspace FROM DUAL;

GETCONFLICTWORKSPACE                                                            
-----------------------------------------------------------------------------
B_focus_2  

GetDiffVersions

Returns the names of the (workspace, savepoint) pairs on which the session has performed the SetDiffVersions operation.

Format

DBMS_WM.GetDiffVersions() RETURN VARCHAR2;

Parameters

None.

Usage Notes

The returned string is in the format '(WS1,SP1), (WS2,SP2)'. This format, including the parentheses, is intended to help you if you later want to use parts of the returned string in a call to the SetDiffVersions procedure.

Examples

The following example displays the names of the (workspace, savepoint) pairs on which the session has performed the SetDiffVersions operation.

SELECT DBMS_WM.GetDiffVersions FROM DUAL;

GETDIFFVERSIONS                                                                 
--------------------------------------------------------------------------------
(B_focus_1, LATEST), (B_focus_2, LATEST) 

GetLockMode

Returns the locking mode for the current session, which determines whether or not access is enabled to versioned rows and corresponding rows in the previous version.

Format

DBMS_WM.GetLockMode() RETURN VARCHAR2;

Parameters

None.

Usage Notes

This function returns E, S, C, or NULL.

For an explanation of Workspace Manager locking, see Section 1.3. See also the descriptions of the SetLockingON and SetLockingOFF procedures.

Examples

The following example displays the locking mode in effect for the session.

SELECT DBMS_WM.GetLockMode FROM DUAL;

GETLOCKMODE                                                                     
--------------------------------------------------------------------------------
C

GetMultiWorkspaces

Returns the names of workspaces visible in the multiworkspace views for version-enabled tables.

Format

DBMS_WM.GetMultiWorkspaces() RETURN VARCHAR2;

Parameters

None.

Usage Notes

This procedure returns the names of workspaces visible in the multiworkspace views, which are described in Section 5.46.

If no workspaces are visible in the multiworkspace views, NULL is returned. If more than one workspace name is returned, names are separated by a comma (for example: workspace1,workspace2,workspace3).

To make a workspace visible in the multiworkspace views, use the SetMultiWorkspaces procedure.

Examples

The following example displays the names of workspaces visible in the multiworkspace views.

SELECT DBMS_WM.GetMultiWorkspaces FROM DUAL;


GetOpContext

Returns the context of the current operation for the current session.

Format

DBMS_WM.GetOpContext() RETURN VARCHAR2;

Parameters

None.

Usage Notes

This function returns one of the following values:

The returned value can be used in user-defined triggers to take appropriate action based on the current operation.

Examples

The following example displays the context of the current operation.

SELECT DBMS_WM.GetOpContext FROM DUAL;

GETOPCONTEXT                                                                     
--------------------------------------------------------------------------------
DML

GetPhysicalTableName

Returns the name (<table_name>_LT form) of the physical table for a version-enabled table.

Format

DBMS_WM.GetPhysicalTableName(
   table_owner  IN VARCHAR2,
   table_name   IN VARCHAR2) RETURN VARCHAR2;

Parameters

Table 4-27 GetPhysicalTableName Function Parameters

Parameter Description
table_owner

Name of the schema that owns table_name.

table_name

Name of the version-enabled table for which to return the name of its associated physical table.


Usage

If table_name is a version-enabled table, this function returns the name of the table, whose name is in the form <table_name>_LT, that was created by Workspace Manager when the EnableVersioning procedure was called. For information about these <table_name>_LT tables, see Section 1.1.11.

If table_name is a not a version-enabled table, this function returns table_name. Thus, you can also use this function to check whether or not a table is version-enabled (that is, by checking whether a name in the form <table_name>_LT or the original table name is returned).

Examples

The following example displays the physical table name associated with the COLA_MARKETING_BUDGET table after that table is version-enabled.

SELECT DBMS_WM.GetPhysicalTableName('wm_developer', 'cola_marketing_budget')
   FROM DUAL;

DBMS_WM.GETPHYSICALTABLENAME('WM_DEVELOPER','COLA_MARKETING_BUDGET')            
--------------------------------------------------------------------------------
COLA_MARKETING_BUDGET_LT 

GetPrivs

Returns a comma-delimited list of all privileges that the current user has for the specified workspace.

Format

DBMS_WM.GetPrivs(
   workspace  IN VARCHAR2) RETURN VARCHAR2;

Parameters

Table 4-28 GetPrivs Function Parameters

Parameter Description
workspace

Name of the workspace for which to return the list of privileges. The name is case sensitive.


Usage

For information about Workspace Manager privileges, see Section 1.4.

Examples

The following example displays the privileges that the current user has for the B_focus_2 workspace.

SELECT DBMS_WM.GetPrivs ('B_focus_2') FROM DUAL;

DBMS_WM.GETPRIVS('B_FOCUS_2')                                                        
--------------------------------------------------------------------------------
ACCESS,MERGE,CREATE,REMOVE,ROLLBACK 

GetSessionInfo

Retrieves information about the current workspace and session context.

Format

DBMS_WM.GetSessionInfo(
   workspace     OUT VARCHAR2,
   context       OUT VARCHAR2,
   context_type  OUT VARCHAR2);

Parameters

Table 4-29 GetSessionInfo Procedure Parameters

Parameter Description
workspace

Name of the workspace that the current session is in.

context

The context of the current session in the workspace, expressed as one of the following: LATEST, a savepoint name, or an instant (point in time) in 'DD-MON-YYYY HH24:MI:SS' date format. (See the Usage Notes for details.)

context_type

The type of context for the current session in the workspace. Specifically, one of the following values: LATEST (if context is LATEST), SAVEPOINT (if context is a savepoint name), or INSTANT (if context is an instant).


Usage Notes

This procedure is useful if you need to know where a session is (workspace and context) -- for example, after you have performed a combination of GotoWorkspace, GotoSavepoint, and GotoDate operations.

After the procedure successfully executes, the context parameter contains one of the following values:

For detailed information about the session context, see Section 1.2.

Examples

The following example retrieves and displays information about the current workspace and context in the session.

DECLARE
  current_workspace VARCHAR2(30);
  current_context VARCHAR2(30);
  current_context_type VARCHAR2(30);
BEGIN
  DBMS_WM.GetSessionInfo(current_workspace, 
                         current_context, 
                         current_context_type);
  DBMS_OUTPUT.PUT_LINE('Session currently in workspace: ' ||current_workspace);
  DBMS_OUTPUT.PUT_LINE('Session context is: ' ||current_context);
  DBMS_OUTPUT.PUT_LINE('Session context is on: ' ||current_context_type);
END;
/
Session currently in workspace: B_focus_2                                       
Session context is: LATEST                                                      
Session context is on: LATEST                                                   

PL/SQL procedure successfully completed.

GetSystemParameter

Returns the value of a Workspace Manager system parameter.

Syntax

DBMS_WM.GetSytstemParameter(
   name   IN VARCHAR2) RETURN VARCHAR2;

Parameters

Table 4-30 GetSystemParameter Procedure Parameters

Parameter Description
name

Name of the Workspace Manager system parameter for which to set the value. The name must be one of the following: ALLOW_CAPTURE_EVENTS, ALLOW_MULTI_PARENT_WORKSPACES, ALLOW_NESTED_TABLE_COLUMNS, CR_WORKSPACE_MODE, FIRE_TRIGGERS_FOR_NONDML_EVENTS, NONCR_WORKSPACE_MODE.


Usage Notes

For information about Workspace Manager system parameters, see Section 1.5.

An exception is raised if the name value is not valid.

Examples

The following checks if multiparent workspaces (described in Section 1.1.10) are allowed.

SELECT DBMS_WM.GetSystemParameter ('ALLOW_MULTI_PARENT_WORKSPACES') FROM DUAL;

DBMS_WM.GETSYSTEMPARAMETER('ALLOW_MULTI_PARENT_WORKSPACES')                     
--------------------------------------------------------------------------------
ON 

GetValidFrom

Returns the ValidFrom attribute of the current session valid time. (Valid time support is described in Chapter 3.)

Format

DBMS_WM.GetValidFrom() RETURN TIMESTAMP WITH TIME ZONE;

Parameters

None.

Usage Notes

To set the session valid time period, use the SetValidTime procedure.

To get the ValidTill attribute of the current session valid time, use the GetValidTill function.

Examples

The following example displays the ValidFrom attribute of the current session valid time.

SELECT DBMS_WM.GetValidFrom FROM DUAL;

GETVALIDFROM
---------------------------------------------------------------------------
01-JAN-1995 12:00:00 -04:00

GetValidTill

Returns the ValidTill attribute of the current session valid time. (Valid time support is described in Chapter 3.)

Format

DBMS_WM.GetValidTill() RETURN TIMESTAMP WITH TIME ZONE;

Parameters

None.

Usage Notes

To set the session valid time period, use the SetValidTime procedure.

To get the ValidFrom attribute of the current session valid time, use the GetValidFrom function.

Examples

The following example displays the ValidTill attribute of the current session valid time.

SELECT DBMS_WM.GetValidTill FROM DUAL;

GETVALIDTILL
---------------------------------------------------------------------------
01-JAN-1996 12:00:00 -04:00

GetWMMetadataSpace

Returns the number of bytes currently used to store the Workspace Manager metadata.

Format

DBMS_WM.GetWMMetadataSpace() RETURN NUMBER;

Parameters

None.

Usage Notes

The Workspace Manager metadata (views, internal tables, and other objects) is by default stored in the default tablespace of the WMSYS user. You cannot directly control the size of the Workspace Manager metadata, but you can control its placement by using the Move_Proc procedure to move the metadata to a different tablespace. You can use the GetWMMetadataSpace function to determine the approximate minimum space that you will need to have available in the tablespace into which you are considering moving the Workspace Manager metadata.

Examples

The following example displays the number of bytes currently used to store the Workspace Manager metadata.

SELECT DBMS_WM.GetWMMetadataSpace FROM DUAL;
 
GETWMMETADATASPACE                                                              
------------------                                                              
           6750208 

GetWorkspace

Returns the current workspace for the session.

Format

DBMS_WM.GetWorkspace() RETURN VARCHAR2;

Parameters

None.

Usage Notes

None.

Examples

The following example displays the current workspace for the session.

SELECT DBMS_WM.GetWorkspace FROM DUAL;

GETWORKSPACE                                                                        
--------------------------------------------------------------------------------
B_focus_2  

GotoDate

Goes to a point at or near the specified date and time in the current workspace.

Syntax

DBMS_WM.GotoDate(
   in_date   IN VARCHAR2,
   fmt       IN VARCHAR2 DEFAULT 'mmddyyyyhh24miss',
   nlsparam  IN VARCHAR2 DEFAULT NULL,
   tsWtz     IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-31 GotoDate Procedure Parameters

Parameter Description
in_date

Date and time for the read-only view of the workspace. (See the Usage Notes for details.)

If in_date is a VARCHAR2 string, it is a date string or a timestamp with time zone, depending on the value of the tsWtz parameter.

fmt

Date format. The options are the same as for the TO_TIMESTAMP_TZ function, which is described in Oracle Database SQL Reference.

Default: 'mmddyyyyhh24miss'

nlsparam

Globalization support options. The options are the same as for the TO_TIMESTAMP_TZ function, which is described in Oracle Database SQL Reference.

tsWtz

Timestamp with time zone flag. A Boolean value (TRUE or FALSE).

TRUE means that in_date is considered a timestamp with time zone information.

FALSE (the default) means that in_date is a date string.


Usage Notes

You are presented a read-only view of the current workspace at or near the specified date and time. The exact time point depends on the history option for tracking changes to data in version-enabled tables, as set by the EnableVersioning procedure or modified by the SetWoOverwriteOFF or SetWoOverwriteON procedure:

For an explanation of the history options, see the description of the hist parameter for the EnableVersioning procedure.

The following example scenario shows the effect of the VIEW_WO_OVERWRITE setting. Assume the following sequence of events:

  1. The MANAGER_NAME value in a row is Adams.

  2. Savepoint SP1 is created.

  3. The MANAGER_NAME value is changed to Baxter.

  4. The time point that will be specified as in_date (in step 7) occurs.

  5. The MANAGER_NAME value is changed to Chang. (Thus, the value has been changed both before and after in_date since the first savepoint and before the second savepoint.)

  6. Savepoint SP2 is created.

  7. A GotoDate operation is executed, specifying the time point in step 4 as in_date.

In the preceding scenario:

The GotoDate procedure should be executed while users exist in the workspace. There are no explicit privileges associated with this procedure.

Examples

The following example goes to a point at or near midnight at the start of 08-Jun-2004, depending on the history option currently in effect.

EXECUTE DBMS_WM.GotoDate ('08-JUN-04', 'DD-MON-YY');

GotoSavepoint

Goes to the specified savepoint in the current workspace.

Syntax

DBMS_WM.GotoSavePoint(
   savepoint_name  IN VARCHAR2 DEFAULT 'LATEST');

Parameters

Table 4-32 GotoSavepoint Procedure Parameters

Parameter Description
savepoint_name

Name of the savepoint. The name is case sensitive. If savepoint_name is not specified, the default is LATEST.


Usage Notes

You are presented a read-only view of the workspace at the time of savepoint creation. This procedure is useful for examining the workspace from different savepoints before performing a rollback to a specific savepoint by calling the RollbackToSP procedure to delete all rows from that savepoint forward.

This operation can be executed while users exist in the workspace. There are no explicit privileges associated with this operation.

If you do not want to roll back to the savepoint, you can call the GotoSavepoint procedure with a null parameter to go to the currently active version in the workspace. (This achieves the same result as calling the GotoWorkspace procedure and specifying the workspace.)

For more information about savepoints, including the LATEST savepoint, see Section 1.1.2.

Examples

The following example goes to the savepoint named Savepoint1.

EXECUTE DBMS_WM.GotoSavepoint ('Savepoint1');

GotoWorkspace

Moves the current session to the specified workspace.

Syntax

DBMS_WM.GotoWorkspace(
   workspace  IN VARCHAR2);

Parameters

Table 4-33 GotoWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.


Usage Notes

After a user goes to a workspace, modifications to data can be made there.

To go to the live database, specify workspace as LIVE. Because many operations are prohibited when any users (including you) are in the workspace, it is often convenient to go to the LIVE workspace before performing operations on created workspaces.

An exception is raised if one or more of the following apply:

Examples

The following example includes the user in the NEWWORKSPACE workspace. The user will begin to work in the latest version in that workspace.

EXECUTE DBMS_WM.GotoWorkspace ('NEWWORKSPACE');

The following example includes the user in the LIVE database workspace. By default, when users connect to a database, they are placed in this workspace.

EXECUTE DBMS_WM.GotoWorkspace ('LIVE');

GrantGraphPriv

Grants privileges on multiparent graph workspaces to users and roles. The grant_option parameter enables the grantee to grant the specified privileges to other users and roles.

Syntax

DBMS_WM.GrantGraphPriv(
   priv_types      IN VARCHAR2,
   leaf_workspace  IN VARCHAR2,
   grantee         IN VARCHAR2,
   node_types      IN VARCHAR2 DEFAULT '(''R'',''I'',''L'')',
   grant_option    IN VARCHAR2 DEFAULT 'NO',
   auto_commit     IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-34 GrantGraphPriv Procedure Parameters

Parameter Description
priv_types

A string of one or more keywords representing privileges. (Section 1.4 discusses Workspace Manager privileges.) Use commas to separate privilege keywords. The available keywords are ACCESS_WORKSPACE, MERGE_WORKSPACE, CREATE_WORKSPACE, REMOVE_WORKSPACE, ROLLBACK_WORKSPACE, and FREEZE_WORKSPACE.

leaf_workspace

Name of the leaf workspace in the directed acyclic graph. (Leaf workspaces, directed acyclic graphs, and other concepts related to multiparent workspaces are explained in Section 1.1.10.) The name is case sensitive.

grantee

Name of the user (can be the PUBLIC user group) or role to which to grant priv_types.

node_types

List of letters (in parentheses and comma-delimited) representing the types of nodes on which to grant the privileges: R for the root of the graph, I for the specified intermediate node, L for the leaf of the graph. The default is all types of nodes.

grant_option

Specify YES to enable the grant option for grantee, or NO (the default) to disable the grant option for grantee. The grant option allows grantee to grant the privileges specified in priv_types on the workspace specified in leaf_workspace to other users and roles.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

Contrast this procedure with GrantWorkspacePriv, which grants workspace-level Workspace Manager privileges on workspaces other than multiparent graph workspaces.

If a user gets a privilege from more than one source and if any of those sources has the grant option for that privilege, the user has the grant option for the privilege. For example, assume that user SCOTT has been granted the ACCESS_WORKSPACE privilege with grant_option as NO, but that the PUBLIC user group has been granted the ACCESS_WORKSPACE privilege with grant_option as YES. Because user SCOTT is a member of PUBLIC, user SCOTT has the ACCESS_WORKSPACE privilege with the grant option.

The WM_ADMIN_ROLE role has all Workspace Manager privileges with the grant option. The WM_ADMIN_ROLE role is automatically given to the DBA role.

The ACCESS_WORKSPACE or ACCESS_ANY_WORKSPACE privilege is needed for all other Workspace Manager privileges.

To revoke workspace-level privileges on multiparent graph workspaces, use the RevokeGraphPriv procedure.

An exception is raised if one or more of the following apply:

Examples

The following example enables user Smith to access all types of nodes in the directed acyclic graph in which the NEWWORKSPACE workspace is the leaf workspace and to merge changes in these workspaces, and it allows Smith to grant the two specified privileges on the leaf workspace to other users.

DBMS_WM.GrantGraphPriv ('ACCESS_WORKSPACE, MERGE_WORKSPACE', 'NEWWORKSPACE', 'Smith', 'YES');

GrantSystemPriv

Grants system-level privileges (not restricted to a particular workspace) to users and roles. The grant_option parameter enables the grantee to grant the specified privileges to other users and roles.

Syntax

DBMS_WM.GrantSystemPriv(
   priv_types    IN VARCHAR2,
   grantee       IN VARCHAR2,
   grant_option  IN VARCHAR2 DEFAULT 'NO',
   auto_commit   IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-35 GrantSystemPriv Procedure Parameters

Parameter Description
priv_types

A string of one or more keywords representing privileges. (Section 1.4 discusses Workspace Manager privileges.) Use commas to separate privilege keywords. The available keywords are ACCESS_ANY_WORKSPACE, MERGE_ANY_WORKSPACE, CREATE_ANY_WORKSPACE, REMOVE_ANY_WORKSPACE, ROLLBACK_ANY_WORKSPACE, and FREEZE_ANY_WORKSPACE.

grantee

Name of the user (can be the PUBLIC user group) or role to which to grant priv_types.

grant_option

Specify YES to enable the grant option for grantee, or NO (the default) to disable the grant option for grantee. The grant option allows grantee to grant the privileges specified in priv_types to other users and roles.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

Contrast this procedure with GrantWorkspacePriv, which grants workspace-level Workspace Manager privileges with keywords that do not contain ANY and which has a workspace parameter.

If a user gets a privilege from more than one source and if any of those sources has the grant option for that privilege, the user has the grant option for the privilege. For example, assume that user SCOTT has been granted the ACCESS_ANY_WORKSPACE privilege with grant_option as NO, but that the PUBLIC user group has been granted the ACCESS_ANY_WORKSPACE privilege with grant_option as YES. Because user SCOTT is a member of PUBLIC, user SCOTT has the ACCESS_ANY_WORKSPACE privilege with the grant option.

The WM_ADMIN_ROLE role has all Workspace Manager privileges with the grant option. The WM_ADMIN_ROLE role is automatically given to the DBA role.

The ACCESS_WORKSPACE or ACCESS_ANY_WORKSPACE privilege is needed for all other Workspace Manager privileges.

To see which users have been granted Workspace Manager system-level privileges, examine the DBA_WM_SYS_PRIVS metadata view, which is described in Section 5.17.

To revoke system-level privileges, use the RevokeSystemPriv procedure.

An exception is raised if one or more of the following apply:

Examples

The following example enables user Smith to access any workspace in the database, but does not allow Smith to grant the ACCESS_ANY_WORKSPACE privilege to other users.

EXECUTE DBMS_WM.GrantSystemPriv ('ACCESS_ANY_WORKSPACE', 'Smith', 'NO');

GrantWorkspacePriv

Grants workspace-level privileges to users and roles. The grant_option parameter enables the grantee to grant the specified privileges to other users and roles.

Syntax

DBMS_WM.GrantWorkspacePriv(
   priv_types    IN VARCHAR2,
   workspace     IN VARCHAR2,
   grantee       IN VARCHAR2,
   grant_option  IN VARCHAR2 DEFAULT 'NO',
   auto_commit   IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-36 GrantWorkspacePriv Procedure Parameters

Parameter Description
priv_types

A string of one or more keywords representing privileges. (Section 1.4 discusses Workspace Manager privileges.) Use commas to separate privilege keywords. The available keywords are ACCESS_WORKSPACE, MERGE_WORKSPACE, CREATE_WORKSPACE, REMOVE_WORKSPACE, ROLLBACK_WORKSPACE, and FREEZE_WORKSPACE.

workspace

Name of the workspace. The name is case sensitive.

grantee

Name of the user (can be the PUBLIC user group) or role to which to grant priv_types.

grant_option

Specify YES to enable the grant option for grantee, or NO (the default) to disable the grant option for grantee. The grant option allows grantee to grant the privileges specified in priv_types on the workspace specified in workspace to other users and roles.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

Contrast this procedure with GrantSystemPriv, which grants system-level Workspace Manager privileges with keywords in the form xxx_ANY_WORKSPACE (ACCESS_ANY_WORKSPACE, MERGE_ANY_WORKSPACE, and so on). Contrast this procedure also with GrantGraphPriv, which grants privileges on multiparent graph workspaces to users and roles.

If a user gets a privilege from more than one source and if any of those sources has the grant option for that privilege, the user has the grant option for the privilege. For example, assume that user SCOTT has been granted the ACCESS_WORKSPACE privilege with grant_option as NO, but that the PUBLIC user group has been granted the ACCESS_WORKSPACE privilege with grant_option as YES. Because user SCOTT is a member of PUBLIC, user SCOTT has the ACCESS_WORKSPACE privilege with the grant option.

The WM_ADMIN_ROLE role has all Workspace Manager privileges with the grant option. The WM_ADMIN_ROLE role is automatically given to the DBA role.

The ACCESS_WORKSPACE or ACCESS_ANY_WORKSPACE privilege is needed for all other Workspace Manager privileges.

To revoke workspace-level privileges, use the RevokeWorkspacePriv procedure.

An exception is raised if one or more of the following apply:

Examples

The following example enables user Smith to access the NEWWORKSPACE workspace and merge changes in that workspace, and allows Smith to grant the two specified privileges on NEWWORKSPACE to other users.

DBMS_WM.GrantWorkspacePriv ('ACCESS_WORKSPACE, MERGE_WORKSPACE', 'NEWWORKSPACE', 'Smith', 'YES');

Import

Imports data from a staging table (all rows, or as limited by any combination of several parameters) into a version-enabled table in a specified workspace.

Syntax

DBMS_WM.Import(
   staging_table   IN VARCHAR2,
   to_table        IN VARCHAR2,
   to_workspace    IN VARCHAR2,
   from_workspace  IN VARCHAR2 DEFAULT NULL,
   where_clause    IN VARCHAR2 DEFAULT NULL,
   import_scope    IN VARCHAR2 DEFAULT DBMS_WM.IMPORT_ALL_DATA,
   ancestor_savepoint_workspace  IN VARCHAR2 DEFAULT NULL,
   ancestor_savepoint_name       IN VARCHAR2 DEFAULT NULL,
   apply_locks     IN BOOLEAN DEFAULT FALSE,
   enforceUCFlag   IN BOOLEAN DEFAULT TRUE,
   enforceRICFlag  IN BOOLEAN DEFAULT TRUE,
   auto_commit     IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-37 Import Procedure Parameters

Parameter Description
staging_table

Name of the table that holds the data that had previously been exported using the Export procedure. The name is not case sensitive.

to_table

Name of the table into which to import the data. The name is not case sensitive.

to_workspace

Name of the workspace in which to import the data. The name is case sensitive.

from_workspace

Name of the workspace from which to import the data. The name is case sensitive. If the staging table contains versioning information, you must specify from_workspace.

where_clause

The WHERE clause (excluding the WHERE keyword) identifying the rows to be imported. Example: 'department_id = 20'

Only primary key columns can be specified in the WHERE clause, except in a subquery. The subquery can refer to columns that are not primary keys, but it cannot refer to a version-enabled table.

If the where_clause parameter is not specified, all rows in staging_table are imported.

import_scope

The scope (amount of data) for the import operation.

DBMS_WM.IMPORT_ALL_DATA (the default) imports all relevant data.

DBMS_WM.IMPORT_MODIFIED_DATA_ONLY imports only relevant data that has been inserted, updated, or deleted in from_workspace.

ancestor_savepoint_workspace

Name of the workspace containing the ancestor savepoint specified in ancestor_savepoint_name. For the current release, if you specify ancestor_savepoint_workspace, the value must be LIVE.

If you specify this parameter, you must also specify ancestor_savepoint_name.

ancestor_savepoint_name

Name of a savepoint in ancestor_savepoint_workspace. All data that was ancestor data at the time of the export operation (see the Usage Notes for the Export procedure) is imported to the specified savepoint. For the current version, if you specify ancestor_savepoint_name, the value must be DBMS_WM.ROOT_VERSION.

If you specify this parameter, you must also specify ancestor_savepoint_workspace.

apply_locks

A Boolean value (TRUE or FALSE).

TRUE causes any locks that were present on the exported data to be applied to the data when importing, unless a more restrictive lock mode is in effect for the current session.

FALSE (the default) ignores any locks on rows in the staging table, but instead always uses the lock mode is in effect for the current session.

enforceUCFlag

A Boolean value (TRUE or FALSE).

TRUE (the default) enforces any unique constraints defined on to_table, ensuring that the import operation does not violate any such constraints.

FALSE does not enforce any unique constraints defined on to_table for the import operation.

enforceRICFlag

A Boolean value (TRUE or FALSE).

TRUE (the default) enforces any referential integrity constraints defined on to_table, ensuring that the import operation does not violate any such constraints.

FALSE does not enforce any referential integrity constraints defined on to_table for the import operation.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

All data that satisfies the where_clause parameter value in the staging table named staging_table and the import_scope parameter value is imported into the version-enabled table named to_table.

The data must have been previously exported to the staging table using the Export procedure.

Each row of data to be imported is considered to be one of the following: inserted, updated, or deleted in from_workspace (that is, modified data); or data that was not modified in from_workspace but can be seen in it (that is, ancestor data). If data is exported from the LIVE workspace, it is all modified data.

An exception is raised if one or more of the following apply:

Examples

The following example imports modified data from the staging table COLA_MARKETING_BUDGET_STG in workspace B_focus_2 into the COLA_MARKETING_BUDGET table in workspace B_Focus_1. (The EXECUTE statement is actually on a single line.)

EXECUTE DBMS_WM.Import(staging_table => 'COLA_MARKETING_BUDGET_STG',
  to_table => 'COLA_MARKETING_BUDGET', to_workspace => 'B_focus_1',
  from_workspace => 'B_focus_2');

IsWorkspaceOccupied

Checks whether or not a workspace has any active sessions.

Syntax

DBMS_WM.IsWorkspaceOccupied(
   workspace  IN VARCHAR2) RETURN VARCHAR2;

Parameters

Table 4-38 IsWorkspaceOccupied Function Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.


Usage Notes

This function returns YES if the workspace has any active sessions, and it returns NO if the workspace has no active sessions.

An exception is raised if the LIVE workspace is specified or if the user does not have the privilege to access the workspace.

Examples

The following example checks if any sessions are in the B_focus_2 workspace.

SELECT DBMS_WM.IsWorkspaceOccupied('B_focus_2') FROM DUAL;

DBMS_WM.ISWORKSPACEOCCUPIED('B_FOCUS_2')                                                 
--------------------------------------------------------------------------------
YES     

LockRows

Controls access to versioned rows in a specified table and to corresponding rows in the parent workspace.

Syntax

DBMS_WM.LockRows(
   workspace     IN VARCHAR2,
   table_name    IN VARCHAR2,
   where_clause  IN VARCHAR2 DEFAULT '',
   lock_mode     IN VARCHAR2 DEFAULT 'E',
   Xmin          IN NUMBER DEFAULT NULL,
   Ymin          IN NUMBER DEFAULT NULL,
   Xmax          IN NUMBER DEFAULT NULL,
   Ymax          IN NUMBER DEFAULT NULL);

Parameters

Table 4-39 LockRows Procedure Parameters

Parameter Description
workspace

Name of the workspace. The latest versions of rows visible from the workspace are locked. If a row has not been modified in this workspace, the locked version could be in an ancestor workspace. The name is case sensitive.

A value of NONE can be used if lock_mode is set to VE (version-exclusive). This causes the latest versions of rows to be locked, regardless of the workspaces from which they are visible.

table_name

Name of the table or (if Xmin, Ymin, Xmax, and Ymax are specified) Spatial topology in which rows are to be locked. The name is not case sensitive.

where_clause

The WHERE clause (excluding the WHERE keyword) identifying the rows to be locked. Example: 'department_id = 20'

Only primary key columns can be specified in the WHERE clause, except in a subquery. The subquery can refer to columns that are not primary keys, but it cannot refer to a version-enabled table.

If where_clause is not specified, all rows in table_name are locked.

Do not specify the where_clause parameter if table_name specifies a Spatial topology name.

lock_mode

Mode with which to set the locks: E (exclusive), WE (workspace-exclusive), VE (version-exclusive), or S (shared). The default is E.

E (exclusive) mode locks the rows in the previous version and the corresponding rows in the current version; no other users in the workspace for either version can change any values.

WE (workspace-exclusive) mode locks the rows in the previous version and the corresponding rows in the current version such that only the user that set the lock can change the values in the current workspace; however, other users in other workspaces can change the values.

VE (version-exclusive) mode locks the rows in the previous version and the corresponding rows in the current version such that only the user that set the lock can change the values; no other users (in any workspace) can change the values.

S (shared) mode locks the rows in the previous version and the corresponding rows in the current version; however, other users in the workspace for the current version (but no users in the workspace for the previous version) can change values in these rows.

Xmin, Ymin

For Oracle Spatial topologies only (see Section 1.14.1), the X and Y coordinate values, respectively, of the lower-left corner of the window containing the rows to be locked.You must specify these parameters if you specified a topology name for table_name; otherwise, do not specify these parameters.

Xmax, Ymax

For Oracle Spatial topologies only (see Section 1.14.1), the X and Y coordinate values, respectively, of the upper-right corner of the window containing the rows to be locked.You must specify these parameters if you specified a topology name for table_name; otherwise, do not specify these parameters.


Usage Notes

This procedure affects Workspace Manager locking, which occurs in addition to any standard Oracle database locking. For an explanation of Workspace Manager locking, see Section 1.3.

This procedure does not affect whether Workspace Manager locking is set on or off (determined by the SetLockingON and SetLockingOFF procedures).

To unlock rows, use the UnlockRows procedure.

For information about Workspace Manager locking for tables in an Oracle Spatial topology, see Section 1.14.1.

Examples

The following example locks rows in the EMPLOYEES table where last_name = 'Smith' in the NEWWORKSPACE workspace.

EXECUTE DBMS_WM.LockRows ('NEWWORKSPACE', 'employees', 'last_name = ''Smith''');

MergeTable

Applies changes to a table (all rows or as specified in the WHERE clause) in a workspace to its parent workspace.

For a multiparent workspace (explained in Section 1.1.10), applies changes to a table (all rows or as specified in the WHERE clause) from all non-root workspaces in the directed acyclic graph to the multiparent root workspace.

Syntax

DBMS_WM.MergeTable(
   workspace         IN VARCHAR2,
   table_id          IN VARCHAR2,
   where_clause      IN VARCHAR2 DEFAULT '',
   create_savepoint  IN BOOLEAN DEFAULT FALSE,
   remove_data       IN BOOLEAN DEFAULT FALSE,
   auto_commit       IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-40 MergeTable Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

table_id

Name of the table containing rows to be merged into the parent workspace. The name is not case sensitive.

where_clause

The WHERE clause (excluding the WHERE keyword) identifying the rows to be merged into the parent workspace. Example: 'department_id = 20'

Only primary key columns can be specified in the WHERE clause, except in a subquery. The subquery can refer to columns that are not primary keys, but it cannot refer to a version-enabled table.

If the where_clause parameter is not specified, all rows in table_name are merged.

create_savepoint

A Boolean value (TRUE or FALSE).

TRUE creates an implicit savepoint in the parent workspace before the merge operation. For a multiparent workspace, creates an implicit savepoint in the multiparent root workspace before the merge operation. (Implicit and explicit savepoints are described in Section 1.1.2.)

FALSE (the default) does not create an implicit savepoint in the parent workspace before the merge operation.

remove_data

A Boolean value (TRUE or FALSE).

TRUE removes the data in the table (as specified by the where_clause parameter) in the child workspace. For a multiparent workspace, it removes the data in the table (as specified by the where_clause parameter) in the non-root workspaces in the directed acyclic graph. The remove_data option is permitted only if workspace has no child workspaces (that is, it is a leaf workspace).

FALSE (the default) does not remove the data in the table in the child workspace.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

All data that satisfies the where_clause parameter value in the version-enabled table named table_name in workspace is applied to the parent workspace of workspace.

Any locks that are held by rows being merged are released.

If there are conflicts between the workspace being merged and its parent workspace, the merge operation fails and the user must manually resolve conflicts using the <table_name>_CONF view. (Conflict resolution is explained in Section 1.1.4.)

A table cannot be merged in the LIVE workspace (because that workspace has no parent workspace).

A table cannot be merged or refreshed if there is an open database transaction affecting the table.

An exception is raised if one or more of the following apply:

Examples

The following example merges changes to the EMP table (in the USER3 schema) where last_name = 'Smith' in NEWWORKSPACE to its parent workspace.

EXECUTE DBMS_WM.MergeTable ('NEWWORKSPACE', 'user3.emp', 'last_name = ''Smith''');

MergeWorkspace

Applies all changes in a workspace to its parent workspace, and optionally removes the workspace.

For a multiparent workspace (explained in Section 1.1.10), applies all changes in the workspace to all other workspaces in the directed acyclic graph, and optionally removes the non-root workspaces in the directed acyclic graph.

Syntax

DBMS_WM.MergeWorkspace(
   workspace         IN VARCHAR2,
   create_savepoint  IN BOOLEAN DEFAULT FALSE,
   remove_workspace  IN BOOLEAN DEFAULT FALSE,
   auto_commit       IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-41 MergeWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

create_savepoint

A Boolean value (TRUE or FALSE).

TRUE creates an implicit savepoint in the parent workspace before the merge operation. (Implicit and explicit savepoints are described in Section 1.1.2.)

FALSE (the default) does not create an implicit savepoint in the parent workspace before the merge operation.

remove_workspace

A Boolean value (TRUE or FALSE).

TRUE removes workspace after the merge operation. For a multiparent workspace, all non-root workspaces in the directed acyclic graph are removed.

FALSE (the default) does not remove workspace after the merge operation; the workspace continues to exist.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

All data in all version-enabled tables in workspace is merged to the parent workspace of workspace, and workspace is removed if remove_workspace is TRUE.

While this procedure is executing, the current workspace is frozen in NO_ACCESS mode and the parent workspace is frozen in READ_ONLY mode, as explained in Section 1.1.5.

If there are conflicts between the workspace being merged and its parent workspace, the merge operation fails and the user must manually resolve conflicts using the <table_name>_CONF view. (Conflict resolution is explained in Section 1.1.4.)

If the remove_workspace parameter value is TRUE, the workspace to be merged must be a leaf workspace, that is, a workspace with no descendant workspaces. (For an explanation of workspace hierarchy, see Section 1.1.1.)

To update rows in the child workspace and merge those changes into the parent workspace in the same transaction, you must specify autocommit=FALSE and ensure that no other session (that is, other than the one performing the update transaction) is in the child workspace.

An exception is raised if one or more of the following apply:

Examples

The following example merges changes in NEWWORKSPACE to its parent workspace.

EXECUTE DBMS_WM.MergeWorkspace ('NEWWORKSPACE');

Move_Proc

Moves the Workspace Manager metadata to a specified tablespace.

Syntax

DBMS_WM.Move_Proc(
   dest_tablespace  IN VARCHAR2 DEFAULT 'SYSAUX');

Parameters

Table 4-42 Move_Proc Procedure Parameters

Parameter Description
dest_tablespace

The table space to which to move the Workspace Manager metadata. The default value is the SYSAUX tablespace.


Usage Notes

The Workspace Manager metadata (views, internal tables, and other objects) is by default stored in the default tablespace of the WMSYS user. You cannot directly control the size of the Workspace Manager metadata, but you can control its placement by using this procedure to move the metadata from its current tablespace to a different tablespace. If you call this procedure without specifying the dest_tablespace parameter, the Workspace manager metadata is moved to the SYSAUX tablespace.

Before you move the metadata, you can use the GetWMMetadataSpace function to determine the approximate minimum space that you will need to have available in the tablespace into which you are considering moving the Workspace Manager metadata.

Examples

The following example moves the Workspace Manager metadata to the TBLSP_1 tablespace.

EXECUTE DBMS_WM.Move_proc('TBLSP_1');

RecoverAllMigratingTables

Attempts to complete the migration process on all tables that were left in an inconsistent state after the Workspace Manager migration procedure failed.

Syntax

DBMS_WM.RecoverAllMigratingTables(
   ignore_last_error IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-43 RecoverAllMigratingTables Procedure Parameters

Parameter Description
ignore_last_error

A Boolean value (TRUE or FALSE).

TRUE ignores the last error, if any, that occurred during the migration process. Information about the last error is stored in the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views, which are described in Chapter 5. See the Usage Notes for more information.

FALSE (the default) does not ignore the last error, if any, that occurred during the migration process.


Usage Notes

If an error occurs while you are upgrading (migrating) to the current Workspace Manager release, one or more version-enabled tables can be left in an inconsistent state. (For information about upgrading to the current release, see Section B.1.) If the upgrade procedure fails, you should try to fix the cause of the error (examine the USER_WM_VT_ERRORS or ALL_WM_VT_ERRORS metadata view to see the SQL statement and error message), and then call the RecoverMigratingTable procedure (for a single table) or RecoverAllMigratingTables procedure (for all tables) with the default ignore_last_error parameter value of FALSE, to try to complete the upgrade process.

However, if the call still fails and you cannot fix the cause of the error, and if you are sure that it is safe and appropriate to ignore this error, then you have the option to ignore the error by calling the RecoverMigratingTable or RecoverAllMigratingTables procedure with the ignore_last_error parameter value of TRUE. Note that you are responsible for ensuring that it is safe and appropriate to ignore the error.

Examples

The following example attempts to recover all version-enabled tables that were left in an inconsistent state when the upgrade procedure failed.

EXECUTE DBMS_WM.RecoverAllMigratingTables;

The following example attempts to recover all version-enabled tables that were left in an inconsistent state when the upgrade procedure failed, and it ignores the last error that caused the upgrade procedure to fail.

EXECUTE DBMS_WM.RecoverAllMigratingTables(TRUE);

RecoverFromDroppedUser

Performs necessary operations after the dropping of one or more database users that owned one or more version-enabled tables.

Syntax

DBMS_WM.RecoverFromDroppedUser(
   ignore_last_error IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-44 RecoverFromDroppedUser Procedure Parameters

Parameter Description
ignore_last_error

A Boolean value (TRUE or FALSE).

TRUE ignores the last error, if any, that occurred during the previous call to the RecoverFromDroppedUser procedure. Information about the last error is stored in the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views, which are described in Chapter 5. See the Usage Notes for more information.

FALSE (the default) does not ignore the last error, if any, that occurred during the previous call to the RecoverFromDroppedUser procedure.


Usage Notes

If a database user with one or more version-enabled tables is dropped, you must execute this procedure as soon as possible. This procedure removes any foreign key constraints in existing tables that depended on any of the version-enabled tables that were dropped as a result of dropping the user that owned these tables. This procedure also fixes any invalid database metadata.

If a call to the RecoverFromDroppedUser procedure fails, the table is left in an inconsistent state. If this occurs, you should try to fix the cause of the error (examine the DBA_WM_VT_ERRORS metadata view to see the SQL statement and error message), and then call the RecoverFromDroppedUser procedure again with the default ignore_last_error parameter value of FALSE. However, if the call still fails and you cannot fix the cause of the error, and if you are sure that it is safe and appropriate to ignore this error, then you have the option to ignore the error by calling the RecoverFromDroppedUser procedure with the ignore_last_error parameter value of TRUE. Note that you are responsible for ensuring that it is safe and appropriate to ignore the error.

To execute this procedure, you must connect to the database instance as a user with SYSDBA privileges.

Examples

The following drops a user named HERMAN that owns one or more version-enabled tables, and then performs the necessary operations after the drop operation.

DROP USER herman CASCADE;
EXECUTE DBMS_WM.RecoverFromDroppedUser;

RecoverMigratingTable

Attempts to complete the migration process on a table that was left in an inconsistent state after the Workspace Manager migration procedure failed.

Syntax

DBMS_WM.RecoverMigratingTable(
   table_name        IN VARCHAR2,
   ignore_last_error IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-45 RecoverMigratingTable Procedure Parameters

Parameter Description
table_name

Name of the version-enabled table to be recovered from the migration error. The name is not case sensitive.

ignore_last_error

A Boolean value (TRUE or FALSE).

TRUE ignores the last error, if any, that occurred during the migration process. Information about the last error is stored in the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views, which are described in Chapter 5. See the Usage Notes for more information.

FALSE (the default) does not ignore the last error, if any, that occurred during the migration process.


Usage Notes

If an error occurs while you are upgrading to the current Workspace Manager release, one or more version-enabled tables can be left in an inconsistent state. (For information about upgrading to the current release, see Section B.1.) If the upgrade procedure fails, you should try to fix the cause of the error (examine the USER_WM_VT_ERRORS or ALL_WM_VT_ERRORS metadata view to see the SQL statement and error message), and then call the RecoverMigratingTable procedure (for a single table) or RecoverAllMigratingTables procedure (for all tables) with the default ignore_last_error parameter value of FALSE, to try to complete the upgrade process.

However, if the call still fails and you cannot fix the cause of the error, and if you are sure that it is safe and appropriate to ignore this error, then you have the option to ignore the error by calling the RecoverMigratingTable or RecoverAllMigratingTables procedure with the ignore_last_error parameter value of TRUE. Note that you are responsible for ensuring that it is safe and appropriate to ignore the error.

An exception is raised if table_name does not exist or is not version-enabled.

Examples

The following example attempts to recover the COLA_MARKETING_BUDGET table from the error that caused the upgrade procedure to fail.

EXECUTE DBMS_WM.RecoverMigratingTable('COLA_MARKETING_BUDGET');

The following example attempts to recover the COLA_MARKETING_BUDGET table and ignores the last error that caused the upgrade procedure to fail.

EXECUTE DBMS_WM.RecoverMigratingTable('COLA_MARKETING_BUDGET', TRUE);

RefreshTable

Applies to a workspace all changes made to a table (all rows or as specified in the WHERE clause) in its parent workspace.

For a multiparent workspace (explained in Section 1.1.10), applies changes from the non-leaf workspaces in the directed acyclic graph to the specified leaf workspace for a specified table. (The table data in the intermediate workspaces is not changed.)

Syntax

DBMS_WM.RefreshTable(
   workspace     IN VARCHAR2,
   table_id      IN VARCHAR2,
   where_clause  IN VARCHAR2 DEFAULT '',
   auto_commit   IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-46 RefreshTable Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

table_id

Name of the table containing the rows to be refreshed using values from the parent workspace. The name is not case sensitive.

where_clause

The WHERE clause (excluding the WHERE keyword) identifying the rows to be refreshed from the parent workspace. Example: 'department_id = 20'

Only primary key columns can be specified in the WHERE clause, except in a subquery. The subquery can refer to columns that are not primary keys, but it cannot refer to a version-enabled table.

If the where_clause parameter is not specified, all rows in table_name are refreshed.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

This procedure applies to workspace all changes in rows that satisfy the where_clause parameter value in the version-enabled table named table_id in the parent workspace since the time when workspace was created or last refreshed.

If there are conflicts between the workspace being refreshed and its parent workspace, the refresh operation fails and the user must manually resolve conflicts using the <table_name>_CONF view. (Conflict resolution is explained in Section 1.1.4.)

This procedure is ignored if workspace is a continually refreshed workspace.

A table cannot be refreshed in the LIVE workspace (because that workspace has no parent workspace).

A table cannot be merged or refreshed if there is an open database transaction affecting the table.

An exception is raised if the user does not have access to table_id, if the user does not have the MERGE_WORKSPACE privilege for workspace or the MERGE_ANY_WORKSPACE privilege, or if auto_commit is TRUE and an open transaction exists in a parent or child workspace of any table that needs to be modified.

Examples

The following example refreshes NEWWORKSPACE by applying changes made to the EMPLOYEES table where last_name = 'Smith' in its parent workspace.

EXECUTE DBMS_WM.RefreshTable ('NEWWORKSPACE', 'employees', 'last_name = ''Smith''');

RefreshWorkspace

Applies to a workspace all changes made in its parent workspace.

For a multiparent workspace (explained in Section 1.1.10), applies changes from the non-leaf workspaces in the directed acyclic graph to the specified leaf workspace. The changes are propagated beginning with the multiparent root workspace and continuing with the intermediate workspaces.

Syntax

DBMS_WM.RefreshWorkspace(
   workspace    IN VARCHAR2,
   auto_commit  IN BOOLEAN DEFAULT TRUE,
   copy_data    IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-47 RefreshWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.

copy_data

A Boolean value (TRUE or FALSE).

TRUE causes all changes in the parent workspace since the creation or last refresh of the child workspace to be copied to the child workspace. No changes occur in any descendent of the child workspace, and the history of changes to the child workspace is preserved.

FALSE (the default) causes minimal data to be copied to the child workspace. The parent version of the child workspace is updated in order for the child workspace and its descendents to have access to the modified rows from the parent workspace. No history of changes to the child workspace is recorded for the operation.


Usage Notes

This procedure applies to workspace all changes made to version-enabled tables in the parent workspace since the time when workspace was created or last refreshed.

If there are conflicts between the workspace being refreshed and its parent workspace, the refresh operation fails and the user must manually resolve conflicts using the <table_name>_CONF view. (Conflict resolution is explained in Section 1.1.4.)

The specified workspace and the parent workspace are frozen in READ_ONLY mode, as explained in Section 1.1.5.

The LIVE workspace cannot be refreshed (because it has no parent workspace).

This procedure is ignored if workspace is a continually refreshed workspace.

An exception is raised if the user does not have the MERGE_WORKSPACE privilege for workspace or the MERGE_ANY_WORKSPACE privilege, or if auto_commit is TRUE and an open transaction exists in a parent or child workspace of any table that needs to be modified.

Examples

The following example refreshes NEWWORKSPACE by applying changes made in its parent workspace.

EXECUTE DBMS_WM.RefreshWorkspace ('NEWWORKSPACE');

RelocateWriterSite

Makes one of the nonwriter sites the new writer site in a Workspace Manager replication environment. (The old writer site becomes one of the nonwriter sites.)

Syntax

DBMS_WM.RelocateWriterSite(
   newwritersite           IN VARCHAR2,
   oldwritersiteavailable  IN BOOLEAN);

Parameters

Table 4-48 RelocateWriterSite Procedure Parameters

Parameter Description
newwritersite

Name of a current nonwriter site (database link) to be made the new writer site in the Workspace Manager replication environment.

oldwritersiteavailable

A Boolean value (TRUE or FALSE).

TRUE causes the old writer site to be updated to reflect the fact that the writer site has changed.

FALSE causes the old writer site not to be updated to reflect the fact that the writer site has changed. In this case, you must use the SynchronizeSite procedure when the old writer site becomes available.


Usage Notes

To use this procedure, you must understand how replication applies to Workspace Manager objects, as explained in Appendix C. You must also understand the major Oracle replication concepts and techniques, which are documented in Oracle Database Advanced Replication and Oracle Database Advanced Replication Management API Reference.

You must execute this procedure as the replication administrator user. You can execute it at any master site.

You should specify the oldwritersiteavailable parameter as TRUE if the old writer site is currently available. If you specify the oldwritersiteavailable parameter as FALSE, you must execute the SynchronizeSite procedure after the old writer site becomes available, to bring that site up to date.

This procedure performs the following operations:

Examples

The following example relocates the writer site for the Workspace Manager environment to BACKUP-SITE1 at a hypothetical company.

DBMS_WM.RelocateWriterSite(
    newwritersite           =>  'BACKUP-SITE1.ACME.COM');
    oldwritersiteavailable  =>  TRUE);

RemoveAsParentWorkspace

Removes a workspace as a parent workspace in a multiparent workspace environment.

Syntax

DBMS_WM.RemoveAsParentWorkspace(
   mp_leafworkspace  IN VARCHAR2,
   parent_workspace  IN VARCHAR2,
   auto_commit       IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-49 RemoveAsParentWorkspace Procedure Parameters

Parameter Description
mp_leaf_workspace

Name of the child workspace (multiparent leaf workspace) from which to remove parent_workspace as a parent workspace. The name is case sensitive.

parent_workspace

Name of the workspace to remove as a parent workspace of mp_leaf_workspace. The name is case sensitive.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

This procedure is part of the support for the multiparent workspaces feature, which is described in Section 1.1.10. This procedure must be used only on a parent workspace that was previously added to the child workspace using the AddAsParentWorkspace procedure.

This procedure does not remove any workspaces. It only makes parent_workspace no longer a parent workspace of mp_leaf_workspace.

An exception is raised if one or more of the following apply:

Examples

The following example removes Workspace4 as a parent workspace of Workspace3. (See the hierarchy illustration in Figure 1-3 in Section 1.1.10.)

EXECUTE DBMS_WM.RemoveAsParentWorkspace ('Workspace3', 'Workspace4');

RemoveWorkspace

Discards all row versions associated with a workspace and deletes the workspace.

Syntax

DBMS_WM.RemoveWorkspace(
   workspace    IN VARCHAR2,
   auto_commit  IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-50 RemoveWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

The RemoveWorkspace operation can only be performed on leaf workspaces (the bottom-most workspaces in a branch in the hierarchy). For an explanation of database workspace hierarchy, see Section 1.1.1.

There must be no other users in the workspace being removed.

An exception is raised if the user does not have the REMOVE_WORKSPACE privilege for workspace or the REMOVE_ANY_WORKSPACE privilege, or if auto_commit is TRUE and an open transaction exists in a parent or child workspace of any table that needs to be modified.

Examples

The following example removes the NEWWORKSPACE workspace.

EXECUTE DBMS_WM.RemoveWorkspace('NEWWORKSPACE');

RemoveWorkspaceTree

Discards all row versions associated with a workspace and its descendant workspaces, and deletes the affected workspaces.

Syntax

DBMS_WM.RemoveWorkspaceTree(
   workspace    IN VARCHAR2,
   auto_commit  IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-51 RemoveWorkspaceTree Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

The RemoveWorkspaceTree operation should be used with extreme caution, because it removes support structures and rolls back changes in a workspace and all its descendants down to the leaf workspace or workspaces. For example, in the hierarchy shown in Figure 1-1 in Section 1.1.1, a RemoveWorkspaceTree operation specifying Workspace1 removes Workspace1, Workspace2, and Workspace3. (For an explanation of database workspace hierarchy, see Section 1.1.1.)

There must be no other users in workspace or any of its descendant workspaces.

An exception is raised if the user does not have the REMOVE_WORKSPACE privilege for workspace or any of its descendant workspaces, or if auto_commit is TRUE and an open transaction exists in a parent or child workspace of any table that needs to be modified.

Examples

The following example removes the NEWWORKSPACE workspace and all its descendant workspaces.

EXECUTE DBMS_WM.RemoveWorkspaceTree('NEWWORKSPACE');

ResolveConflicts

Resolves conflicts between workspaces.

Syntax

DBMS_WM.ResolveConflicts(
   workspace     IN VARCHAR2,
   table_name    IN VARCHAR2,
   where_clause  IN VARCHAR2,
   keep          IN VARCHAR2);

Parameters

Table 4-52 ResolveConflicts Procedure Parameters

Parameter Description
workspace

Name of the workspace to check for conflicts with other workspaces. The name is case sensitive.

table_name

Name of the table to check for conflicts. The name is not case sensitive.

where_clause

The WHERE clause (excluding the WHERE keyword) identifying the rows to be refreshed from the parent workspace. Example: 'department_id = 20'

Only primary key columns can be specified in the WHERE clause, except in a subquery. The subquery can refer to columns that are not primary keys, but it cannot refer to a version-enabled table.

keep

Workspace in favor of which to resolve conflicts: PARENT, CHILD, or BASE.

PARENT causes the parent workspace rows to be copied to the child workspace.

CHILD does not cause the child workspace rows to be copied immediately to the parent workspace. However, the conflict is considered resolved, and the child workspace rows are copied to the parent workspace when the child workspace is merged.

BASE causes the base rows to be copied to the child workspace but not to the parent workspace. However, the conflict is considered resolved; and when the child workspace is merged, the base rows are copied to the parent workspace. Note that BASE is ignored for insert-insert conflicts where a base row does not exist; in this case, the keep parameter value must be PARENT or CHILD.


Usage Notes

This procedure checks the condition identified by the table_name and where_clause parameters, and it finds any conflicts between row values in workspace and its parent workspace. This procedure resolves conflicts by using the row values in the parent or child workspace, as specified in the keep parameter; however, the conflict resolution is not actually merged until you commit the transaction (standard database commit operation) and call the CommitResolve procedure to end the conflict resolution session. (For more information about conflict resolution, including an overall view of the process, see Section 1.1.4.)

For example, assume that for Department 20 (DEPARTMENT_ID = 20), the MANAGER_NAME in the LIVE and Workspace1 workspaces is Tom. Then, the following operations occur:

  1. The manager_name for Department 20 is changed in the LIVE database workspace from Tom to Mary.

  2. The change is committed (a standard database commit operation).

  3. The manager_name for Department 20 is changed in Workspace1 from Tom to Franco.

  4. The MergeWorkspace procedure is called to merge Workspace1 changes to the LIVE workspace.

    At this point, however, a conflict exists with respect to MANAGER_NAME for Department 20 in Workspace1 (Franco, which conflicts with Mary in the LIVE workspace), and therefore the call to MergeWorkspace does not succeed.

  5. The ResolveConflicts procedure is called with the following parameters: ('Workspace1', 'department', 'department_id = 20', 'child').

    After the MergeWorkspace operation in step 7, the MANAGER_NAME value will be Franco in both the Workspace1 and LIVE workspaces.

  6. The change is committed (a standard database commit operation).

  7. The MergeWorkspace procedure is called to merge Workspace1 changes to the LIVE workspace.

The following considerations apply during a conflict resolution session:

For more information about conflict resolution, see Section 1.1.4.

Examples

The following example resolves conflicts involving rows in the DEPARTMENT table in Workspace1 where DEPARTMENT_ID is 20, and uses the values in the child workspace to resolve all such conflicts. It then merges the results of the conflict resolution by first committing the transaction (standard commit) and then calling the MergeWorkspace procedure.

EXECUTE DBMS_WM.BeginResolve ('Workspace1');
EXECUTE  DBMS_WM.ResolveConflicts ('Workspace1', 'department', 'department_id = 20', 'child');
COMMIT;
EXECUTE DBMS_WM.CommitResolve ('Workspace1');

RevokeGraphPriv

Revokes (removes) privileges on multiparent graph workspaces from users and roles for a specified leaf workspace.

Syntax

DBMS_WM.RevokeGraphPriv(
   priv_types      IN VARCHAR2,
   leaf_workspace  IN VARCHAR2,
   grantee         IN VARCHAR2.
   node_types      IN VARCHAR2 DEFAULT '(''R'',''I'',''L'')',
   auto_commit     IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-53 RevokeGraphPriv Procedure Parameters

Parameter Description
priv_types

A string of one or more keywords representing privileges. (Section 1.4 discusses Workspace Manager privileges.) Use commas to separate privilege keywords. The available keywords are ACCESS_WORKSPACE, MERGE_WORKSPACE, CREATE_WORKSPACE, REMOVE_WORKSPACE, and ROLLBACK_WORKSPACE.

leaf_workspace

Name of the leaf workspace in the directed acyclic graph. (Leaf workspaces, directed acyclic graphs, and other concepts related to multiparent workspaces are explained in Section 1.1.10.) The name is case sensitive.

grantee

Name of the user (can be the PUBLIC user group) or role from which to revoke priv_types.

node_types

List of letters (in parentheses and comma-delimited) representing the types of nodes on which to revoke the privileges: R for the root of the graph, I for the specified intermediate node, L for the leaf of the graph. The default is all types of nodes.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

Contrast this procedure with RevokeWorkspacePriv, which grants workspace-level Workspace Manager privileges on workspaces other than multiparent graph workspaces.

To grant workspace-level privileges on multiparent graph workspaces, use the GrantGraphPriv procedure.

An exception is raised if one or more of the following apply:

Examples

The following example disallows user Smith from accessing all types of nodes in the directed acyclic graph in which the NEWWORKSPACE workspace is the leaf workspace and from merging changes in these workspaces.

EXECUTE DBMS_WM.RevokeWorkspacePriv ('ACCESS_WORKSPACE, MERGE_WORKSPACE', 'NEWWORKSPACE', 'Smith');

RevokeSystemPriv

Revokes (removes) system-level privileges from users and roles.

Syntax

DBMS_WM.RevokeSystemPriv(
   priv_types   IN VARCHAR2,
   grantee      IN VARCHAR2,
   auto_commit  IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-54 RevokeSystemPriv Procedure Parameters

Parameter Description
priv_types

A string of one or more keywords representing privileges. (Section 1.4 discusses Workspace Manager privileges.) Use commas to separate privilege keywords. The available keywords are ACCESS_ANY_WORKSPACE, MERGE_ANY_WORKSPACE, CREATE_ANY_WORKSPACE, REMOVE_ANY_WORKSPACE, and ROLLBACK_ANY_WORKSPACE.

grantee

Name of the user (can be the PUBLIC user group) or role from which to revoke priv_types.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

Contrast this procedure with RevokeWorkspacePriv, which revokes workspace-level Workspace Manager privileges with keywords in the form xxx_WORKSPACE (ACCESS_WORKSPACE, MERGE_WORKSPACE, and so on).

To grant system-level privileges, use the GrantSystemPriv procedure.

An exception is raised if one or more of the following apply:

Examples

The following example disallows user Smith from accessing workspaces and merging changes in workspaces.

EXECUTE DBMS_WM.RevokeSystemPriv ('ACCESS_ANY_WORKSPACE, MERGE_ANY_WORKSPACE', 'Smith');

RevokeWorkspacePriv

Revokes (removes) workspace-level privileges from users and roles for a specified workspace.

Syntax

DBMS_WM.RevokeWorkspacePriv(
   priv_types   IN VARCHAR2,
   workspace    IN VARCHAR2,
   grantee      IN VARCHAR2.
   auto_commit  IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-55 RevokeWorkspacePriv Procedure Parameters

Parameter Description
priv_types

A string of one or more keywords representing privileges. (Section 1.4 discusses Workspace Manager privileges.) Use commas to separate privilege keywords. The available keywords are ACCESS_WORKSPACE, MERGE_WORKSPACE, CREATE_WORKSPACE, REMOVE_WORKSPACE, and ROLLBACK_WORKSPACE.

workspace

Name of the workspace. The name is case sensitive.

grantee

Name of the user (can be the PUBLIC user group) or role from which to revoke priv_types.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

Contrast this procedure with RevokeSystemPriv, which revokes system-level Workspace Manager privileges with keywords in the form xxx_ANY_WORKSPACE (ACCESS_ANY_WORKSPACE, MERGE_ANY_WORKSPACE, and so on). Also contrast this procedure with RevokeGraphPriv, which grants workspace-level Workspace Manager privileges on multiparent graph workspaces

To grant workspace-level privileges, use the GrantWorkspacePriv procedure.

An exception is raised if one or more of the following apply:

Examples

The following example disallows user Smith from accessing the NEWWORKSPACE workspace and merging changes in that workspace.

EXECUTE DBMS_WM.RevokeWorkspacePriv ('ACCESS_WORKSPACE, MERGE_WORKSPACE', 'NEWWORKSPACE', 'Smith');

RollbackBulkLoading

Rolls back changes made to a version-enabled table during a bulk load operation.

Syntax

DBMS_WM.RollbackBulkLoading(
   table_name         IN VARCHAR2,
   ignore_last_error  IN BOOLEAN DEFAULT FALSE);

Parameters

Table 4-56 RollbackBulkLoading Procedure Parameters

Parameter Description
table_name

Name of the version-enabled table into which data will be bulk loaded. The name is not case sensitive.

ignore_last_error

A Boolean value (TRUE or FALSE).

TRUE ignores the last error, if any, that occurred during the previous call to the RollbackBulkLoading procedure. Information about the last error is stored in the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views, which are described in Chapter 5. See the Usage Notes for more information.

FALSE (the default) does not ignore the last error, if any, that occurred during the previous call to the RollbackBulkLoading procedure.


Usage Notes

For information about the requirements for bulk loading data into version-enabled tables, see Section 1.7.

This procedure re-creates all the views that were dropped by the BeginBulkLoading procedure.

If a call to the RollbackBulkLoading procedure fails, you should try to fix the cause of the error. Examine the USER_WM_VT_ERRORS and ALL_WM_VT_ERRORS metadata views to see the SQL statement and error message. Fix the cause of the error, and then call the RollbackBulkLoading procedure again with the default ignore_last_error parameter value of FALSE. However, if the call still fails and you cannot fix the cause of the error, and if you are sure that it is safe and appropriate to ignore this error, then you have the option to ignore the error by calling the RollbackBulkLoading procedure with the ignore_last_error parameter value of TRUE. Note that you are responsible for ensuring that it is safe and appropriate to ignore the error.

An exception is raised if one or more of the following apply:

Examples

The following example rolls back changes made to EMP table during a bulk load operation.

EXECUTE DBMS_WM.RollbackBulkLoading ('EMP');

RollbackDDL

Rolls back (cancels) DDL (data definition language) changes made during a DDL session for a specified table, and ends the DDL session.

Syntax

DBMS_WM.RollbackDDL(
   table_name  IN VARCHAR2);

Parameters

Table 4-57 RollbackDDL Procedure Parameters

Parameter Description
table_name

Name of the version-enabled table. The name is not case sensitive.


Usage Notes

This procedure rolls back (cancels) changes that were made to a version-enabled table and to any indexes and triggers based on the version-enabled table during a DDL session. It also deletes the <table-name>_LTS skeleton table that was created by the BeginDDL procedure.

For detailed information about performing DDL operations related to version-enabled tables, see Section 1.8; and for DDL operations on version-enabled tables in an Oracle replication environment, see also Section C.3.

An exception is raised if one or more of the following apply:

Examples

The following example begins a DDL session, adds a column named COMMENTS to the COLA_MARKETING_BUDGET table by using the skeleton table named COLA_MARKETING_BUDGET_LTS, and ends the DDL session by canceling the change.

EXECUTE DBMS_WM.BeginDDL('COLA_MARKETING_BUDGET');
ALTER TABLE cola_marketing_budget_lts ADD (comments VARCHAR2(100));
EXECUTE DBMS_WM.RollbackDDL('COLA_MARKETING_BUDGET');

RollbackResolve

Quits a conflict resolution session and discards all changes in the workspace since the BeginResolve procedure was executed.

Syntax

DBMS_WM.RollbackResolve(
   workspace  IN VARCHAR2);

Parameters

Table 4-58 RollbackResolve Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.


Usage Notes

This procedure quits the current conflict resolution session (started by the BeginResolve procedure), and discards all changes in the workspace since the start of the conflict resolution session. Contrast this procedure with CommitResolve, which saves all changes.

While the conflict resolution session is being rolled back, the workspace is frozen in 1WRITER mode, as explained in Section 1.1.5.

For more information about conflict resolution, see Section 1.1.4.

An exception is raised if one or more of the following apply:

Examples

The following example quits the conflict resolution session in Workspace1 and discards all changes.

EXECUTE  DBMS_WM.RollbackResolve ('Workspace1');

RollbackTable

Discards all changes made in the workspace to a specified table (all rows or as specified in the WHERE clause).

Syntax

DBMS_WM.RollbackTable(
   workspace     IN VARCHAR2,
   table_id      IN VARCHAR2,
   sp_name       IN VARCHAR2 DEFAULT '',
   where_clause  IN VARCHAR2 DEFAULT '',
   remove_locks  IN BOOLEAN DEFAULT TRUE,
   auto_commit   IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-59 RollbackTable Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

table_id

Name of the table containing rows to be discarded. The name is not case sensitive.

sp_name

Name of the savepoint to which to roll back. The name is case sensitive. The default is to discard all changes (that is, ignore any savepoints).

where_clause

The WHERE clause (excluding the WHERE keyword) identifying the rows to be discarded. Example: 'department_id = 20'

Only primary key columns can be specified in the WHERE clause, except in a subquery. The subquery can refer to columns that are not primary keys, but it cannot refer to a version-enabled table.

If the where_clause parameter is not specified, all rows that meet the criteria of the other parameters are discarded.

remove_locks

A Boolean value (TRUE or FALSE).

TRUE (the default) releases those locks on rows in the parent workspace that satisfy the condition in the where_clause parameter and that were not versioned in the child workspace. This option has no effect if a savepoint is specified (sp_name parameter).

FALSE does not release any locks in the parent workspace.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

You cannot roll back to a savepoint if any implicit savepoints were created since the specified savepoint, unless you first merge or remove the descendant workspaces that caused the implicit savepoints to be created. For example, referring to Figure 1-2 in Section 1.1.2, the user in Workspace1 cannot roll back to savepoint SP1 until Workspace3 (which caused implicit savepoint SPc to be created) is merged or removed.

An exception is raised if one or more of the following apply:

Examples

The following example rolls back all changes made to the EMP table (in the USER3 schema) in the NEWWORKSPACE workspace since that workspace was created.

EXECUTE DBMS_WM.RollbackTable ('NEWWORKSPACE', 'user3.emp');

RollbackToSP

Discards all data changes made in the workspace to version-enabled tables since the specified savepoint.

Syntax

DBMS_WM.RollbackToSP(
   workspace       IN VARCHAR2,
   savepoint_name  IN VARCHAR2,
   auto_commit     IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-60 RollbackToSP Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

savepoint_name

Name of the savepoint to which to roll back changes. The name is case sensitive.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

While this procedure is executing, the workspace is frozen in NO_ACCESS mode.

Contrast this procedure with RollbackWorkspace, which rolls back all changes made since the creation of the workspace.

You cannot roll back to a savepoint if any implicit savepoints were created since the specified savepoint, unless you first merge or remove the descendant workspaces that caused the implicit savepoints to be created. For example, referring to Figure 1-2 in Section 1.1.2, the user in Workspace1 cannot roll back to savepoint SP1 until Workspace3 (which caused implicit savepoint SPc to be created) is merged or removed.

An exception is raised if one or more of the following apply:

Examples

The following example rolls back any changes made in the NEWWORKSPACE workspace to all tables since the creation of Savepoint1.

EXECUTE DBMS_WM.RollbackToSP ('NEWWORKSPACE', 'Savepoint1');

RollbackWorkspace

Discards all data changes made in the workspace to version-enabled tables.

Syntax

DBMS_WM.RollbackWorkspace(
   workspace    IN VARCHAR2,
   auto_commit  IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-61 RollbackWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

Only leaf workspaces can be rolled back. That is, a workspace cannot be rolled back if it has any descendant workspaces. (For an explanation of workspace hierarchy, see Section 1.1.1.)

Contrast this procedure with RollbackToSP, which rolls back changes to a specified savepoint.

Like the RemoveWorkspace procedure, RollbackWorkspace deletes the data in the workspace; however, unlike the RemoveWorkspace procedure, RollbackWorkspace does not delete the Workspace Manager workspace structure.

While this procedure is executing, the specified workspace is frozen in NO_ACCESS mode, as explained in Section 1.1.5.

An exception is raised if one or more of the following apply:

Examples

The following example rolls back any changes made in the NEWWORKSPACE workspace since that workspace was created.

EXECUTE DBMS_WM.RollbackWorkspace ('NEWWORKSPACE');

SetCaptureEvent

Enables or disables the capture of all Workspace Manager events or events of a specific type.

Syntax

DBMS_WM.SetCaptureEvent(
   event_name  IN VARCHAR2,
   capture     IN VARCHAR2 DEFAULT 'ON');

Parameters

Table 4-62 SetCaptureEvent Procedure Parameters

Parameter Description
event_name

One of the following values: ALL_EVENTS, TABLE_MERGE_W_REMOVE_DATA, TABLE_MERGE_WO_REMOVE_DATA, TABLE_REFRESH, TABLE_ROLLBACK, WORKSPACE_COMPRESS, WORKSPACE_CREATE, WORKSPACE_MERGE_W_REMOVE, WORKSPACE_MERGE_WO_REMOVE, WORKSPACE_REFRESH, WORKSPACE_REMOVE, WORKSPACE_ROLLBACK, WORKSPACE_VERSION.

ALL_EVENTS includes all Workspace Manager events. The other values reflect specific event types, which are listed and explained in Section 2.1.

capture

ON (the default) enables the capture of event_name events.

OFF disables the capture of event_name events.


Usage Notes

For information about Workspace Manager events, see Chapter 2.

This procedure requires that the Workspace Manager system parameter ALLOW_CAPTURE_EVENTS be set to ON. To check the value of a Workspace Manager system parameter, use the GetSystemParameter procedure; to set a Workspace Manager system parameter, use the SetSystemParameter procedure.

You can use this procedure to control which types of events are captured. For example, you can enable the capture of all events, and then disable the capture of a few types of events; or you can disable the capture of all events, and then enable the capture of a few types of events.

To see which types of events are currently being captured, examine the WM_EVENTS_INFO metadata view, which is described in Section 5.39.

If this procedure completes successfully, it commits the caller's open database transaction.

An exception is raised if one or more of the following apply:

Examples

The following example captures all Workspace Manager events except workspace compression events, by first specifying that all events are to be captured, and then excluding workspace compression events.

-- Allow Workspace Manager events to be captured. (Required for SetCaptureEvent)
EXECUTE DBMS_WM.SetSystemParameter ('ALLOW_CAPTURE_EVENTS', 'ON');
-- Start capturing all Workspace Manager events.
EXECUTE DBMS_WM.SetCaptureEvent ('ALL_EVENTS','ON');
-- Exclude workspace compression events.
EXECUTE DBMS_WM.SetCaptureEvent ('WORKSPACE_COMPRESS','OFF');

SetCompressWorkspace

Creates rows in the WM_COMPRESSIBLE_TABLES metadata view with information about version-enabled tables that need to be compressed if workspace compression operations are performed.

Syntax

DBMS_WM.SetCompressWorkspace(
   workspace  IN VARCHAR2,
   firstSP    IN VARCHAR2 DEFAULT NULL,
   secondSP   IN VARCHAR2 DEFAULT NULL);

Parameters

Table 4-63 SetCompressWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.

firstSP

Savepoint on the first version of the compression range. Savepoint names are case sensitive.

If only workspace and firstSP are specified, all rows in version-enabled tables affected between workspace creation and firstSP are checked to see if they need to be compressed in a workspace compression operation is performed.

If workspace, firstSP, and secondSP are specified, all rows in version-enabled tables affected between firstSP and secondSP are checked.

If only workspace is specified (no savepoints), all rows in version-enabled tables are checked.

secondSP

Savepoint on the first version of the compression range. All rows in version-enabled tables from firstSP to secondSP are checked to see if they need to be compressed in a workspace compression operation is performed. Savepoint names are case sensitive.


Usage Notes

You can (but do not need to) use this procedure before calling the CompressWorkspace or CompressWorkspaceTree procedure.

This procedure creates rows in the WM_COMPRESSIBLE_TABLES metadata view (described in WM_COMPRESSIBLE_TABLES) only for version-enabled tables that would need to be compressed during a workspace compression operation.

Examples

The following example creates rows in the WM_COMPRESSIBLE_TABLES metadata view for any version-enabled tables that would need to be compressed during an operation that compressed the B_focus_1 workspace.

EXECUTE DBMS_WM.SetCompressWorkspace ('B_focus_1');

SetConflictWorkspace

Determines whether or not conflicts exist between a workspace and its parent.

Syntax

DBMS_WM.SetConflictWorkspace(
   workspace  IN VARCHAR2);

Parameters

Table 4-64 SetConflictWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.


Usage Notes

This procedure checks for any conflicts between workspace and its parent workspace, and it modifies the content of the <table_name>_CONF views (explained in Section 5.42) as needed.

A SELECT operation from the <table_name>_CONF views for all tables modified in a workspace displays all rows in the workspace that are in conflict with the parent workspace. (To obtain a list of tables that have conflicts for the current conflict workspace setting, use the SQL statement SELECT * FROM ALL_WM_VERSIONED_TABLES WHERE conflict = 'YES';. The SQL statement SELECT * FROM <table_name>_CONF displays conflicts for <table_name> between the current workspace and its parent workspace.)

Any conflicts must be resolved before a workspace can be merged or refreshed. To resolve a conflict, you must use the ResolveConflicts procedure, and then merge the result of the resolution by using the MergeWorkspace procedure.

Examples

The following example checks for any conflicts between B_focus_2 and its parent workspace, and modifies the contents of the <table_name>_CONF views as needed.

EXECUTE DBMS_WM.SetConflictWorkspace ('B_focus_2');

SetDiffVersions

Finds differences in values in version-enabled tables for two savepoints and their common ancestor (base). It modifies the contents of the differences views that describe these differences.

Syntax

DBMS_WM.SetDiffVersions(
   workspace1  IN VARCHAR2,
   workspace2  IN VARCHAR2);

or

DBMS_WM.SetDiffVersions(
   workspace1  IN VARCHAR2,
   savepoint1  IN VARCHAR2,
   workspace2  IN VARCHAR2,
   savepoint2  IN VARCHAR2);

Parameters

Table 4-65 SetDiffVersions Procedure Parameters

Parameter Description
workspace1

Name of the first workspace to be checked for differences in version-enabled tables. The name is case sensitive.

savepoint1

Name of the savepoint in workspace1 for which values are to be checked. The name is case sensitive.

If savepoint1 and savepoint2 are not specified, the rows in version-enabled tables for the LATEST savepoint in each workspace are checked. (The LATEST savepoint is explained in Section 1.1.2.)

workspace2

Name of the second workspace to be checked for differences in version-enabled tables. The name is case sensitive.

savepoint2

Name of the savepoint in workspace2 for which values are to be checked. The name is case sensitive.


Usage Notes

This procedure modifies the contents of the differences views (xxx_DIFF), which are described in Section 5.43. Each call to the procedure populates one or more sets of three rows, each set consisting of:

You can then select rows from the appropriate xxx_DIFF view or views to check comparable table values in the two savepoints and their common ancestor. The common ancestor (or base) is identified as DiffBase in xxx_DIFF view rows.

Examples

The following example checks the differences in version-enabled tables for the B_focus_1 and B_focus_2 workspaces. (The output has been reformatted for readability.)

-- Add rows to difference view: COLA_MARKETING_BUDGET_DIFF
EXECUTE DBMS_WM.SetDiffVersions ('B_focus_1', 'B_focus_2');

-- View the rows that were just added.
SELECT * from COLA_MARKETING_BUDGET_DIFF;
    
PRODUCT_ID  PRODUCT_NAME  MANAGER  BUDGET  WM_DIFFVER          WMCODE
----------  ------------  -------  ------  -----------         --------
       1        cola_a    Alvarez   2      DiffBase            NC
       1        cola_a    Alvarez   1.5    B_focus_1, LATEST   U       
       1        cola_a    Alvarez   2      B_focus_2, LATEST   NC      
       2        cola_b    Burton    2      DiffBase            NC      
       2        cola_b    Beasley   3      B_focus_1, LATEST   U       
       2        cola_b    Burton    2.5    B_focus_2, LATEST   U    
       3        cola_c    Chen      1.5    DiffBase            NC   
       3        cola_c    Chen      1      B_focus_1, LATEST   U   
       3        cola_c    Chen      1.5    B_focus_2, LATEST   NC  
       4        cola_d    Davis     3.5    DiffBase            NC  
       4        cola_d    Davis     3      B_focus_1, LATEST   U   
       4        cola_d    Davis     2.5    B_focus_2, LATEST   U   
         
12 rows selected.

Section 5.43 explains how to interpret and use the information in the differences (xxx_DIFF) views.


SetLockingOFF

Disables Workspace Manager locking for the current session.

Syntax

DBMS_WM.SetLockingOFF();

Parameters

None.

Usage Notes

This procedure turns off Workspace Manager locking that was set on by the SetLockingON procedure. Existing locks applied by this session remain locked. All new changes by this session are not locked.

Examples

The following example sets locking off for the session.

EXECUTE DBMS_WM.SetLockingOFF;

SetLockingON

Enables Workspace Manager locking for the current session.

Syntax

DBMS_WM.SetLockingON(
   lockmode  IN VARCHAR2);

Parameters

Table 4-66 SetLockingON Procedure Parameters

Parameter Description
lockmode

Locking mode. Must be E, WE, VE, S, or C.

E (exclusive) mode locks the rows in the previous version and the corresponding rows in the current version; no other users in the workspace for either version can change any values.

WE (workspace-exclusive) mode locks the rows in the previous version and the corresponding rows in the current version such that only the user that set the lock can change the values in the current workspace; however, other users in other workspaces can change the values.

VE (version-exclusive) mode locks the rows in the previous version and the corresponding rows in the current version such that only the user that set the lock can change the values; no other users (in any workspace) can change the values.

S (shared) mode locks the rows in the previous version and the corresponding rows in the current version; however, other users in the workspace for the current version (but no users in the workspace for the previous version) can change values in these rows.

C (carry-forward) mode locks rows in the current workspace with the same locking mode as the corresponding rows in the previous version. (If a row is not locked in the previous version, its corresponding row in the current version is not locked.)


Usage Notes

This procedure affects Workspace Manager locking, which occurs in addition to any standard Oracle database locking. Workspace Manager locks can be used to prevent conflicts. When a user locks a row, the corresponding row in the parent workspace is also locked. Thus, when this workspace merges with the parent at merge time, it is guaranteed that this row will not have a conflict.

For information about Workspace Manager lock management, see Section 1.3.

Exclusive locking (lockmode value of E) prevents the use of what-if scenarios in which different values for one or more columns are tested. Thus, plan any testing of scenarios when exclusive locking is not in effect.

Locking is enabled at the user session level, and the locking mode stays in effect until any of the following occurs:

The locks remain in effect for the duration of the workspace, unless unlocked by the UnlockRows procedure. (Existing locks are not affected by the SetLockingOFF procedure.)

There are no specific privileges associated with locking. Any session that can go to a workspace can set locking on.

Examples

The following example sets exclusive locking on for the session.

EXECUTE DBMS_WM.SetLockingON ('E');

All rows locked by this user remain locked until the workspace is merged or rolled back.


SetMultiWorkspaces

Makes the specified workspace or workspaces visible in the multiworkspace views for version-enabled tables.

Syntax

DBMS_WM.SetMultiWorkspaces(
   workspaces  IN VARCHAR2);

Parameters

Table 4-67 SetMultiWorkspaces Procedure Parameters

Parameter Description
workspaces

The workspace or workspaces for which information is to be added to the multiworkspace views (described in Section 5.46). The workspace names are case sensitive.

To specify more than one workspace (but no more than eight), use a comma to separate workspace names. For example: 'workspace1,workspace2'


Usage Notes

This procedure adds rows to the multiworkspace views (xxx_MW). See Section 5.46 for information about the contents and uses of these views.

To see the names of workspaces visible in the multiworkspace views, use the GetMultiWorkspaces function.

An exception is raised if one or more of the following apply:

Examples

The following example adds information to the multiworkspace views for version-enabled tables in the B_focus_1 workspace.

EXECUTE DBMS_WM.SetMultiWorkspaces ('B_focus_1');

The following example shows the use of the SetMultiWorkspaces procedure to view information without leaving the current workspace, and the use of the GotoWorkspace procedure to view the same information.

-- These two pairs of statements select the same information.
EXECUTE DBMS_WM.SetMultiWorkspaces ('myworkspace');
SELECT * from mytable_mw;

EXECUTE DBMS_WM.GotoWorkspace ('myworkspace');
SELECT * from mytable;

To select only the rows modified in myworkspace, change the first SELECT statement in the preceding example to the following:

SELECT * from mytable_mw WHERE wm_modified_by = 'myworkspace';

The following example shows the latest rows in the combined ancestor versions of the workspaces named myworkspace and yourworkspace. If the same row is selected from more than workspace, that row is shown only once. Note that there may be more than one row for a primary key because different workspaces might be selecting different versions of the primary key.

EXECUTE DBMS_WM.SetMultiWorkspaces ('myworkspace,yourworkspace');
SELECT * from mytable_mw;

SetSystemParameter

Sets the value of a Workspace Manager system parameter.

Syntax

DBMS_WM.SetSytstemParameter(
   name   IN VARCHAR2,
   value  IN VARCHAR2);

Parameters

Table 4-68 SetSystemParameter Procedure Parameters

Parameter Description
name

Name of the Workspace Manager system parameter for which to set the value. The name must be one of the following: ALLOW_CAPTURE_EVENTS, ALLOW_MULTI_PARENT_WORKSPACES, ALLOW_NESTED_TABLE_COLUMNS, CR_WORKSPACE_MODE, FIRE_TRIGGERS_FOR_NONDML_EVENTS, NONCR_WORKSPACE_MODE.

value

Value for the specified Workspace Manager system parameter, as explained in Table 1-5 in Section 1.5


Usage Notes

For information about Workspace Manager system parameters, see Section 1.5.

If this procedure completes successfully, it commits the caller's open database transaction.

An exception is raised if one or more of the following apply:

Examples

The following example allows multiparent workspaces (described in Section 1.1.10) to be created.

EXECUTE DBMS_WM.SetSystemParameter ('ALLOW_MULTI_PARENT_WORKSPACES', 'ON');

SetTriggerEvents

Enables the execution of a trigger for a specified set of triggering events. The trigger will not be executed for events not specified

Syntax

DBMS_WM.SetTriggerEvents(
   triggerName    IN VARCHAR2,
   triggerEvents  IN VARCHAR2);

Parameters

Table 4-69 SetTriggerEvents Procedure Parameters

Parameter Description
triggerName

Name of the trigger for which to set one or more events.

triggerEvents

A comma-delimited list of trigger event names, where each trigger event name is one of the following string constants:

DBMS_WM.DML: Only for DML operations.

DBMS_WM.TABLE_IMPORT: Import table (using the Import procedure).

DBMS_WM.TABLE_MERGE_W_REMOVE_DATA: Merge table and remove data.

DBMS_WM.TABLE_MERGE_WO_REMOVE_DATA: Merge table without removing data.

DBMS_WM.WORKSPACE_MERGE_W_REMOVE: Merge workspace and remove the workspace

DBMS_WM.WORKSPACE_MERGE_WO_REMOVE: Merge workspace without removing the workspace.


Usage Notes

For information about using triggers with Workspace Manager, see Section 1.10.

By default, user-defined triggers are executed for both DML and workspace events, unless the default behavior is changed by using the Workspace Manager system parameter FIRE_TRIGGERS_FOR_NONDML_EVENTS (described in Section 1.5). You can use the SetTriggerEvents procedure to override the current FIRE_TRIGGERS_FOR_NONDML_EVENTS setting for specific triggers; however, if you later change the value of the FIRE_TRIGGERS_FOR_NONDML_EVENTS system parameter, this new value overrides any setting previously specified using the SetTriggerEvents procedure.

If this procedure completes successfully, it commits the caller's open database transaction.

An exception is raised if one or more of the following apply:

Examples

The following example enables the trigger SCOTT.InsertTrigger only for DML events.

EXECUTE DBMS_WM.setTriggerEvents('SCOTT.InsertTrigger', DBMS_WM.DML);

The following example enables the trigger SCOTT.InsertTrigger for DML events and table merge operations.

EXECUTE DBMS_WM.setTriggerEvents('SCOTT.InsertTrigger', dbms_wm.DML || ',' || 
                         dbms_wm.TABLE_MERGE_WO_REMOVE_DATA || ',' ||
                         dbms_wm.TABLE_MERGE_W_REMOVE_DATA);

SetValidTime

Sets the session valid time period. (Valid time support is described in Chapter 3.)

Syntax

DBMS_WM.SetValidTime(
   validFrom IN TIMESTAMP WITH TIME ZONE DEFAULT DBMS_WM.CURRENT_TIME,
   validTill IN TIMESTAMP WITH TIME ZONE DEFAULT DBMS_WM.UNTIL_CHANGED);

Parameters

Table 4-70 SetValidTime Procedure Parameters

Parameter Description
validFrom

The start of the session valid time period. The default value is the current timestamp value.

validTill

The end of the session valid time period. The default is that the time remains valid until the session valid time is changed.


Usage Notes

For information about Workspace Manager valid time support, see Chapter 3. Section 3.2 explains how validFrom and validTill values are interpreted.

If this procedure is not invoked in the session or if it is invoked with no parameters, all rows that are valid at the current time are considered valid, and the valid time period is considered to be from the current time forward without limit.

Examples

The following example sets the session valid time to include all of the year 2003.

EXECUTE DBMS_WM.SetValidTime(TO_DATE('01-01-2003', 'MM-DD-YYYY'), TO_DATE('01-01-2004', 'MM-DD-YYYY'));

SetWMValidTimeFilterOFF

Removes the valid time filter for the current session.

Syntax

DBMS_WM.SetWMValidTimeFilterOFF();

Parameters

None.

Usage Notes

This procedure reverses the effect of theSetWMValidTimeFilterON procedure, and causes the previously defined valid time filter to be ignored for queries against tables with valid time support. Workspace Manager valid time support is explained in Chapter 3.

See also the Usage Notes for the SetWMValidTimeFilterON procedure.

Examples

The following example removes the valid time filter for the current session.

EXECUTE DBMS_WM.SetWMValidTimeFilterOFF;

SetWMValidTimeFilterON

Sets a valid time filter for the current session (that is, a time to be applied to version-enabled tables.

Syntax

DBMS_WM.SetValidTimeFilterON(
   filtertime  IN TIMESTAMP WITH TIME ZONE DEFAULT NULL);

Parameters

Table 4-71 SetValidTimeFilterON Procedure Parameters

Parameter Description
filtertime

Date to be used as a filter when querying version-enabled tables that have valid time support.

The default value is the current time; that is, each select operation on a version-enabled table with valid time support returns data that is valid as of the current time.


Usage Notes

A valid time filter is a time that is applied to queries against version-enabled tables that have valid time support. When a valid time filter is set for the current session, only rows that are valid for the specified time are returned. Workspace Manager valid time support is explained in Chapter 3.

The purpose for setting a valid time filter is usually to work with only one row for a given primary key value. For example, assume that for the current valid time period, the session has two rows for employee Adams: the first row is valid from 01-Mar-2004 to 30-Apr-2005, and the second row is valid from 01-May-2005 until it is changed. If you set the valid time filter to 01-Jan-2005 and select all rows for Adams, only the first row (the one valid from 01-Mar-2004 to 30-Apr-2005) is returned. If you remove the valid time filter and select all rows for Adams, both rows are returned.

The filtertime value must be in the valid time range for the session. You can set the valid time range using the SetValidTime procedure.

Examples

The following example sets a valid time filter so that for queries against version-enabled tables with valid time support, only rows that are valid on January 1, 2005 are returned.

EXECUTE DBMS_WM.SetValidTimeFilterOn(TO_DATE('2005-01-01', 'yyyy-mm-dd'));

SetWMValidUpdateModeOFF

Disables sequenced and nonsequenced update operations and sequenced delete operations on tables that have valid time support.

Syntax

DBMS_WM.SetWMValidUpdateModeOFF();

Parameters

None.

Usage Notes

This procedure disables sequenced and nonsequenced update operations and sequenced delete operations on tables that have valid time support. Workspace Manager valid time support is explained in Chapter 3; sequenced and nonsequenced update operations and sequenced delete operations are explained in Section 3.6.2.1.

When sequenced update and delete operations are enabled, when an update or delete operation is performed on a table with valid time support, the session's current valid time period is used so that only rows valid during that period are updated or deleted. However, calling the SetWMValidUpdateModeOFF procedure enables all row data to be updated or deleted, regardless of the valid time period, and causes WM_VALID column values in the table not to be updated. (This procedure does not affect insert or query operations on tables with valid time support.)

See also the Usage Notes for the SetWMValidUpdateModeON procedure.

Examples

The following example disables sequenced and nonsequenced update operations and sequenced delete operations on tables that have valid time support.

EXECUTE DBMS_WM.SetWMValidUpdateModeOFF;

SetWMValidUpdateModeON

Enables sequenced and nonsequenced update operations and sequenced delete operations on tables that have valid time support.

Syntax

DBMS_WM.SetWMValidUpdateModeON();

Parameters

None.

Usage Notes

This procedure enables sequenced and nonsequenced update operations and sequenced delete operations on tables that have valid time support. Sequenced update and delete operations are enabled when a table is version-enabled with valid time support or when valid time support is added to a version-enabled table; however, sequenced update and delete operations can be disabled using the SetWMValidUpdateModeOFF procedure.

Workspace Manager valid time support is explained in Chapter 3; sequenced and nonsequenced update operations and sequenced delete operations are explained in Section 3.6.2.2.

Examples

The following example enables sequenced and nonsequenced update operations and sequenced delete operations on tables that have valid time support. It reverses the effect of the SetWMValidUpdateModeOFF procedure.

EXECUTE DBMS_WM.SetWMValidUpdateModeON;

SetWoOverwriteOFF

Disables the VIEW_WO_OVERWRITE history option that was enabled by the EnableVersioning or SetWoOverwriteON procedure, changing the option to VIEW_W_OVERWRITE (with overwrite).

Syntax

DBMS_WM.SetWoOverwriteOFF();

Parameters

None.

Usage Notes

This procedure affects the recording of history information in the views named <table_name>_HIST by changing the VIEW_WO_OVERWRITE option to VIEW_W_OVERWRITE. That is, from this point forward, the views show only the most recent modifications to the same version of the table. A history of modifications to the version is not maintained; that is, subsequent changes to a row in the same version overwrite earlier changes.

This procedure affects only tables that were version-enabled with the hist parameter set to VIEW_WO_OVERWRITE in the call to the EnableVersioning procedure.

The <table_name>_HIST views are described in Section 5.44. The VIEW_WO_OVERWRITE and VIEW_W_OVERWRITE options are further described in the description of the EnableVersioning procedure.

The history option affects the behavior of the GotoDate procedure. See the Usage Notes for that procedure.

The result of the SetWoOverwriteOFF procedure remains in effect only for the duration of the current session. To reverse the effect of this procedure, use the SetWoOverwriteON procedure.

Examples

The following example disables the VIEW_WO_OVERWRITE history option.

EXECUTE DBMS_WM.SetWoOverwriteOFF;

SetWoOverwriteON

Enables the VIEW_WO_OVERWRITE history option that was disabled by the SetWoOverwriteOFF procedure.

Syntax

DBMS_WM.SetWoOverwriteON();

Parameters

None.

Usage Notes

This procedure affects the recording of history information in the views named <table_name>_HIST by changing the VIEW_W_OVERWRITE option to VIEW_WO_OVERWRITE (without overwrite). That is, from this point forward, the views show all modifications to the same version of the table. A history of modifications to the version is maintained; that is, subsequent changes to a row in the same version do not overwrite earlier changes.

This procedure affects only tables that were affected by a previous call to the SetWoOverwriteOFF procedure.

The <table_name>_HIST views are described in Section 5.44. The VIEW_WO_OVERWRITE and VIEW_W_OVERWRITE options are further described in the description of the EnableVersioning procedure.

The VIEW_WO_OVERWRITE history option can be overridden when a workspace is compressed by specifying the compress_view_wo_overwrite parameter as TRUE with the CompressWorkspace or CompressWorkspaceTree procedure.

The history option affects the behavior of the GotoDate procedure. See the Usage Notes for that procedure.

To reverse the effect of this procedure, use the SetWoOverwriteOFF procedure.

Examples

The following example enables the VIEW_WO_OVERWRITE history option.

EXECUTE DBMS_WM.SetWoOverwriteON;

SetWorkspaceLockModeOFF

Disables Workspace Manager locking for the specified workspace.

Syntax

DBMS_WM.SetWorkspaceLockModeOFF(
   workspace    IN VARCHAR2,
   auto_commit  IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-72 SetWorkspaceLockModeOFF Procedure Parameters

Parameter Description
workspace

Name of the workspace for which to set the locking mode off. The name is case sensitive.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

This procedure turns off Workspace Manager locking that was set on by the SetWorkspaceLockModeON procedure. Existing locks applied by this session remain locked. All new changes by this session or a subsequent session are not locked, unless the session turns locking on by executing the SetLockingON procedure.

An exception is raised if any of the following occurs:

Examples

The following example sets locking off for the workspace named NEWWORKSPACE.

EXECUTE DBMS_WM.SetWorkspaceLockModeOFF('NEWWORKSPACE');

SetWorkspaceLockModeON

Enables Workspace Manager locking for the specified workspace.

Syntax

DBMS_WM.SetWorkspaceLockModeON(
   workspace    IN VARCHAR2,
   lockmode     IN VARCHAR2,
   override     IN BOOLEAN DEFAULT FALSE,
   auto_commit  IN BOOLEAN DEFAULT TRUE);

Parameters

Table 4-73 SetWorkspaceLockModeON Procedure Parameters

Parameter Description
workspace

Name of the workspace for which to enable Workspace Manager locking. The name is case sensitive.

lockmode

Default locking mode for row-level locking. Must be E, WE, VE, S, or C.

E (exclusive) mode locks the rows in the parent workspace and the corresponding rows in the current workspace; no other users in either workspace can change any values.

WE (workspace-exclusive) mode locks the rows in the previous version and the corresponding rows in the current version such that only the user that set the lock can change the values in the current workspace; however, other users in other workspaces can change the values.

VE (version-exclusive) mode locks the rows in the previous version and the corresponding rows in the current version such that only the user that set the lock can change the values; no other users (in any workspace) can change the values.

S (shared) mode locks the rows in the parent workspace and the corresponding rows in the current workspace; however, other users in the current workspace (but no users in the parent workspace) can change values in these rows.

C (carry-forward) mode locks rows in the current workspace with the same locking mode as the corresponding rows in the parent workspace. (If a row is not locked in the parent workspace, its corresponding row in the child workspace is not locked.)

override

A Boolean value (TRUE or FALSE)

TRUE allows a session in the workspace to change the lockmode value by using the SetLockingON and SetLockingOFF procedures.

FALSE (the default) prevents a session in the workspace from changing the lockmode value.

auto_commit

A Boolean value (TRUE or FALSE).

TRUE (the default) causes the operation to be executed as an autonomous database transaction that will be committed when it finishes.

FALSE causes the operation to be executed as part of the caller's open database transaction (if one exists). If there is no open database transaction, the operation is executed in a new database transaction. In either case, the caller is responsible for committing the transaction. For more information, see Section 1.1.8.


Usage Notes

This procedure affects Workspace Manager locking, which occurs in addition to any standard Oracle database locking. Workspace Manager locks can be used to prevent conflicts. When a user locks a row, the corresponding row in the parent workspace is also locked. Thus, when this workspace merges with the parent at merge time, it is guaranteed that this row will not have a conflict.

For information about Workspace Manager lock management, see Section 1.3.

Exclusive locking (lockmode value of E) prevents the use of what-if scenarios in which different values for one or more columns are tested. Thus, plan any testing of scenarios when exclusive locking is not in effect.

If the override parameter value is TRUE, locking can also be enabled and disabled at the user session level with the SetLockingON and SetLockingOFF procedures, respectively.

All new changes by this session or a subsequent session are locked, unless the session turns locking off by executing the SetLockingOFF procedure.

An exception is raised if any of the following occurs:

Examples

The following example sets exclusive locking on for the workspace named NEWWORKSPACE.

EXECUTE DBMS_WM.SetWorkspaceLockModeON ('NEWWORKSPACE', 'E');

All locked rows remain locked until the workspace is merged or rolled back.


SynchronizeSite

Brings the local site (the old writer site) up to date in the Workspace Manager replication environment after the writer site was moved using the RelocateWriterSite procedure.

Syntax

DBMS_WM.SynchronizeSite(
   newwritersite  IN VARCHAR2);

Parameters

Table 4-74 SynchronizeSite Procedure Parameters

Parameter Description
newwritersite

Name of the new writer site (database link) with which the local site needs to be brought up to date.


Usage Notes

To use this procedure, you must understand how replication applies to Workspace Manager objects, as explained in Appendix C. You must also understand the major Oracle replication concepts and techniques, which are documented in Oracle Database Advanced Replication and Oracle Database Advanced Replication Management API Reference.

You must execute this procedure as the replication administrator user.

You must execute this procedure on the old writer site if you specified the oldwritersiteavailable parameter as FALSE when you executed the RelocateWriterSite procedure.

Examples

The following example brings the local system up to date with the new writer site (BACKUP-SITE1.ACME.COM) in the Workspace Manager replication environment.

DBMS_WM.SynchronizeSite('BACKUP-SITE1.ACME.COM');

UnfreezeWorkspace

Enables access and changes to a workspace, reversing the effect of the FreezeWorkspace procedure.

Syntax

DBMS_WM.UnfreezeWorkspace(
   workspace  IN VARCHAR2);

Parameters

Table 4-75 UnfreezeWorkspace Procedure Parameters

Parameter Description
workspace

Name of the workspace. The name is case sensitive.


Usage Notes

The operation fails if any sessions are in workspace.

You can unfreeze a workspace only if one or more of the following apply:

Examples

The following example unfreezes the NEWWORKSPACE workspace.

EXECUTE DBMS_WM.UnfreezeWorkspace ('NEWWORKSPACE');

UnlockRows

Enables access to versioned rows in a specified table and to corresponding rows in the parent workspace.

Syntax

DBMS_WM.UnlockRows(
   workspace     IN VARCHAR2,
   table_name    IN VARCHAR2,
   where_clause  IN VARCHAR2 DEFAULT '',
   all_or_user   IN VARCHAR2 DEFAULT 'USER',
   lock_mode     IN VARCHAR2 DEFAULT 'ES',
   Xmin          IN NUMBER DEFAULT NULL,
   Ymin          IN NUMBER DEFAULT NULL,
   Xmax          IN NUMBER DEFAULT NULL,
   Ymax          IN NUMBER DEFAULT NULL);

Parameters

Table 4-76 UnlockRows Procedure Parameters

Parameter Description
workspace

Name of the workspace: locked rows in this workspace and corresponding rows in the parent workspace will be unlocked, as specified in the remaining parameters. The name is case sensitive.

A value of NONE can be used if lock_mode is set to VE (version-exclusive). This causes rows locked by any workspace to be unlocked.

table_name

Name of the table or (if Xmin, Ymin, Xmax, and Ymax are specified) Spatial topology in which rows are to be unlocked. The name is not case sensitive.

where_clause

The WHERE clause (excluding the WHERE keyword) identifying the rows to be unlocked. Example: 'department_id = 20'

Only primary key columns can be specified in the WHERE clause, except in a subquery. The subquery can refer to columns that are not primary keys, but it cannot refer to a version-enabled table.

If the where_clause parameter is not specified, all rows in table_name are made accessible.

Do not specify the where_clause parameter if table_name specifies a Spatial topology name.

all_or_user

Scope of the request: ALL or USER.

ALL: All locks accessible by the user in the specified workspace are considered.

USER (default): Only locks owned by the user in the specified workspace are considered.

lock_mode

Locking mode: E, WE, VE, S, or ES (default).

E (exclusive): Only exclusive mode locks are considered.

WE (workspace-exclusive): Only workspace-exclusive mode locks are considered.

VE (version-exclusive): Only version-exclusive mode locks are considered.

S (shared): Only shared mode locks are considered.

ES (exclusive and shared: the default): Both exclusive mode and shared mode locks are considered.

Xmin, Ymin

For Oracle Spatial topologies only (see Section 1.14.1), the X and Y coordinate values, respectively, of the lower-left corner of the window containing the rows to be locked.You must specify these parameters if you specified a topology name for table_name; otherwise, do not specify these parameters.

Xmax, Ymax

For Oracle Spatial topologies only (see Section 1.14.1), the X and Y coordinate values, respectively, of the upper-right corner of the window containing the rows to be locked.You must specify these parameters if you specified a topology name for table_name; otherwise, do not specify these parameters.


Usage Notes

This procedure affects Workspace Manager locking, which occurs in addition to any standard Oracle database locking. For an explanation of Workspace Manager locking, see Section 1.3.

This procedure unlocks rows that were previously locked (see the LockRows procedure). It does not affect whether Workspace Manager locking is set on or off (determined by the SetLockingON and SetLockingOFF procedures).

For information about Workspace Manager locking for tables in an Oracle Spatial topology, see Section 1.14.1.

Examples

The following example unlocks the EMPLOYEES table where last_name = 'Smith' in the NEWWORKSPACE workspace.

EXECUTE DBMS_WM.UnlockRows ('employees', 'NEWWORKSPACE', 'last_name = ''Smith''');

UseDefaultValuesForNulls

Determines whether or not Workspace Manager, for the current session, uses the default value for a column when the user specifies a null value for the column in an insert operation on a version-enabled table.

Syntax

DBMS_WM.UseDefaultValuesForNulls(
   mode_var IN VARCHAR2);

Parameters

Table 4-77 UseDefaultValuesForNulls Procedure Parameters

Parameter Description
mode_var

Mode for handling the insertion of null values: OFF or ON.

OFF: A null value is inserted into the column. (This is the normal Oracle behavior.)

ON: The default value for the column is inserted into the column.


Usage Notes

This procedure affects what Workspace Manager does only if an INSERT statement into a version-enabled table explicitly specifies NULL for a column when the column has been defined as having a default value. For example, assume the following table definition:

CREATE TABLE players (name VARCHAR2(20), rating NUMBER DEFAULT 10);

If the PLAYERS table is version-enabled and if you have not executed this procedure with a mode_val parameter value of OFF, the following statement inserts a row for Smith with a null RATING value:

INSERT INTO players VALUES ('Smith', NULL);

However, if you have executed the UseDefaultValuesForNulls procedure with a mode_val parameter value of ON, that statement inserts a row for Smith with a RATING value of 10.

If the INSERT statement does not specify a value for a column that has a default value, the default value is inserted regardless of whether or not you previously called the UseDefaultValuesForNulls procedure or what the mode_val parameter value was. For example, the following statement always inserts a row for Smith with a RATING value of 10:

INSERT INTO players VALUES ('Smith');

Examples

The following example causes the column default value to be used during the rest of the current session whenever an INSERT statement into a version-enabled table specifies a null value for a column that has a default value.

EXECUTE DBMS_WM.UseDefaultValuesForNulls('ON');