--/* -- * $RCSfile: extreme.mib $ - ExtremeWare enterprise MIB -- * -- * Copyright (c) 1997-9 by Extreme Networks Inc. -- * -- * Extreme Networks -- * http://www.extremenetworks.com -- * -- * -- * Revision control history -- * ------------------------ -- * $Id: extreme.mib 1.24 1999/12/14 02:02:09 mrathi v606b1 $ $ProjectRevision: 1.5.1.88 $ -- * -- * Extreme Networks modification history -- * ------------------------------------- -- * $Log: extreme.mib $ -- * Revision 1.24 1999/12/14 02:02:09 mrathi -- * Make Loadshare2 Table Read-only -- * Revision 1.23 1999/12/08 00:14:39 mrathi -- * Change text for ge4 and ge6 card types to g4x and g6x -- * Revision 1.22 1999/12/06 21:16:45 nforood -- * Added card type mapping from the MIB value to EW enum value and -- * vice versa -- * Revision 1.21 1999/11/18 02:06:25 mrathi -- * Updated lots of access-clauses. Added vlanOpaqueTable and vlanStackTable -- * Revision 1.19 1999/11/15 02:00:11 abhatt -- * Send esrpStateChange traps when state changes -- * Revision 1.18 1999/11/13 00:23:57 ibagchi -- * Revision 1.17 1999/11/12 04:31:54Z ibagchi -- * Added OIDs for Summi7i and MSM64. -- * Revision 1.16 1999/11/12 02:36:58Z ibagchi -- * Updated extremeQosRuleTable. Included RtStats MIB from 5.0. -- * Changed the MAX-ACCESS clause from not-accessible to -- * read-only so that EEM versions 2.0 and prior don't stop working. -- * Revision 1.15 1999/11/02 17:22:05Z ibagchi -- * Changed the index to the EDP mib from vlan id to vlan name. -- * Revision 1.14 1999/10/30 02:32:43Z ibagchi -- * Checked in ESRP mib. -- * Revision 1.13 1999/10/14 16:42:45Z ibagchi -- * Fixed PR 5973. Added extremeRmonEnable. -- * Revision 1.12 1999/10/13 22:17:57Z ibagchi -- * New loadshare table extremePortLoadshare2 added. Coverted -- * the mib syntax from SMI v1 to SMI v2. -- * Revision 1.11 1999/09/20 22:54:54 ibagchi -- * Removed extremePortSummitlink and extremeVCLinkTables for -- * 6.0. These tables will not be supported on NG. -- * Revision 1.10 1999/09/14 20:32:13 ibagchi -- * Removed additional attributes from the extremeQosProfileTable. -- * Need to discuss their mapping in the new hardware. Almost sure -- * they will not be implemented for 6.0. -- * Revision 1.9 1999/05/19 02:36:16 ibagchi -- * Commented out yet unsupported attributes in the extremeQosProfile table. -- * Revision 1.10 1999/03/30 21:24:55 ibagchi -- * Rewrite smart traps and make it work. -- * Revision 1.9 1999/03/06 01:48:41 Asmith -- * Added DLCS MIB (but excluded for now) -- * Revision 1.8 1999/03/05 02:35:01 Asmith -- * FTP MIB merged in with extreme.mib -- * Added extreme PBQOS MIB for EW5.0 -- * Revision 1.7 1998/10/13 02:44:08 Asmith -- * Added comment per PR3601/3686; reformat some lines -- * Revision 1.6 1998/09/18 17:07:09 mrathi -- * minor typo. -- * Revision 1.5 1998/09/18 02:57:23 mrathi -- * Added vlanIpAddressTable -- * Revision 1.4 1998/09/04 19:12:47 mrathi -- * Added oid 8 for BlackDiamond -- * Revision 1.3 1998/09/02 02:58:30 mrathi -- * Revisions -- * Revision 1.2 1998/08/28 07:16:18 mrathi -- * Updated Andrew's changes from Summit codebase rev 1.24, and add chassisGroup, OpaqueTypes and traps for BD support -- * Revision 1.1 1998/07/02 04:30:07 ghanning -- * Initial revision -- * Revision 1.31 1998/06/23 01:59:38 Asmith -- * added Summit24 -- * Revision 1.30 1998/05/15 18:32:17 asmith -- * removed extremeQosDot1pEnabled (PR2264) -- * added extremeUnitPaceMode (PR2420) -- * removed extremeVlanDot1qStaticEntry (PR2367) -- * Revision 1.29 1998/05/11 19:21:50 asmith -- * revised descriptions for protocol sensitive stuff (PR2226) -- * Revision 1.28 1998/04/17 22:29:15 asmith -- * Added summit4fx sysObjectId -- * Clarify semantics of VlanProtocol fields -- * Revision 1.27 1998/04/15 02:33:04 abhatt -- * Included support for DllEncpasType = "none" for VlanProtocoltable -- * Revision 1.26 1998/04/07 02:31:28 abhatt -- * Included new system objects. -- * Revision 1.25 1998/04/04 00:00:09 asmith -- * summit6 -> summit48; remove summit5 -- * Revision 1.24 1998/04/03 23:39:18 abhatt -- * Added OperMode to SummitLink Table -- * Revision 1.23 1998/03/20 21:53:45 abhatt -- * Now support extremePortSummitLinkTable -- * Revision 1.22 1998/02/18 21:52:16 abhatt -- * Update. -- * Revision 1.21 1998/02/18 06:38:11 abhatt -- * Added extremeQosByVlanMappingEntry -- * Revision 1.20 1998/02/13 00:18:48 abhatt -- * Changed extremeSmartTrapPoll's object to read-write -- * Revision 1.19 1998/02/08 08:02:48 abhatt -- * Included extremeTrapPollInfo objects to flush the Instance Table -- * Revision 1.18 1998/02/03 21:27:49 abhatt -- * Fix -- * Revision 1.16 1998/01/31 02:11:15 abhatt -- * changed "changedOid" from read-write to read-only. -- * Revision 1.15 1998/01/26 21:22:25 abhatt -- * Update -- * Revision 1.14 1998/01/22 23:57:46 abhatt -- * Latest version -- * Revision 1.13 1998/01/21 03:49:28 abhatt -- * Update -- * Revision 1.11.1.1.1.1 1998/01/21 00:01:21 abhatt -- * Revision 1.11.1.1 1998/01/20 18:15:37 abhatt -- * Temporary check-in -- * Revision 1.11 1998/01/09 23:55:26 asmith -- * Added smart trap definitions -- * Modifications to virtual chassis link table -- * Revision 1.10 1997/12/22 23:03:48 asmith -- * added some more general system group objects -- * Revision 1.9 1997/12/19 23:25:46 asmith -- * first draft of MIB for 2.0 release -- * Revision 1.8 1997/10/31 19:44:43 asmith -- * added extremeMauType1000BaseSX (PR1765) -- * Revision 1.7 1997/09/19 18:08:22 asmith -- * Clean up for external release -- * -- */ -- -- This file contains multiple ASN.1 Module definitions -- EXTREME-BASE-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises FROM RFC1155-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC; -- Organization & Product branches extremenetworks OBJECT IDENTIFIER ::= { enterprises 1916 } extremeAgent OBJECT IDENTIFIER ::= { extremenetworks 1 } extremeProduct OBJECT IDENTIFIER ::= { extremenetworks 2 } extremeMisc OBJECT IDENTIFIER ::= { extremenetworks 3 } -- -- Extreme Products -- summit1 OBJECT IDENTIFIER ::= { extremeProduct 1 } -- 8 x 1Gbps summit2 OBJECT IDENTIFIER ::= { extremeProduct 2 } -- 2 x 1Gbps, 16 x 10/100Mbps summit3 OBJECT IDENTIFIER ::= { extremeProduct 3 } -- 1 x 1Gbps, 24 x 10/100Mbps summit4 OBJECT IDENTIFIER ::= { extremeProduct 4 } -- 6 x 1Gbps, 16 x 10/100Mbps UTP summit4fx OBJECT IDENTIFIER ::= { extremeProduct 5 } -- 6 x 1Gbps, 16 x 10/100Mbps fiber FX summit48 OBJECT IDENTIFIER ::= { extremeProduct 6 } -- 2 x 1Gbps, 48 x 10/100Mbps summit24 OBJECT IDENTIFIER ::= { extremeProduct 7 } -- 1 x 1Gbps, 24 x 10/100Mbps blackDiamond OBJECT IDENTIFIER ::= { extremeProduct 8 } -- chassis based system with dual msm and 8 switching cards blackDiamond64 OBJECT IDENTIFIER ::= { extremeProduct 11 } -- black diamond with the inferno chipset aka MSM64 summit7iSX OBJECT IDENTIFIER ::= { extremeProduct 12 } -- 4 x 1Gbps, 28 x 1Gbps MT-RJ summit7iTX OBJECT IDENTIFIER ::= { extremeProduct 13 } -- 4 x 1Gbps, 28 x 10/100/1000 Base-TX ------------------------------------------------------------------------------ -- -- Assorted OIDs that are pointed to by other MIBs -- extremeOids OBJECT IDENTIFIER ::= { extremeMisc 1 } -- -- OIDs for as-yet-unstandardised 802.3 MAU types -- (see MAU MIB for usage) -- extremeMauType OBJECT IDENTIFIER ::= { extremeOids 1 } extremeMauType1000BaseSX OBJECT IDENTIFIER ::= { extremeMauType 1 } -- "X fiber over short-wavelength laser PMD as specified -- in clause 38, duplex mode unknown" extremeMauType1000BaseLX OBJECT IDENTIFIER ::= { extremeMauType 2 } -- "X fiber over long-wavelength laser PMD as specified -- in clause 38, duplex mode unknown" extremeMauType1000BaseCX OBJECT IDENTIFIER ::= { extremeMauType 3 } -- "X copper over 150-ohm balanced cable PMD as specified -- in clause 39, duplex mode unknown" extremeMauType1000BaseSXFD OBJECT IDENTIFIER ::= { extremeMauType 4 } -- "X fiber over short-wavelength laser PMD as specified -- in clause 38, full-duplex mode" extremeMauType1000BaseLXFD OBJECT IDENTIFIER ::= { extremeMauType 5 } -- "X fiber over long-wavelength laser PMD as specified -- in clause 38, full-duplex mode" extremeMauType1000BaseCXFD OBJECT IDENTIFIER ::= { extremeMauType 6 } -- "X copper over 150-ohm balanced cable PMD as specified -- in clause 39, full-duplex mode" -- =============================================================================== -- -- Extreme MIB Objects -- extremeSystem OBJECT IDENTIFIER ::= { extremeAgent 1 } extremeVlan OBJECT IDENTIFIER ::= { extremeAgent 2 } extremeQos OBJECT IDENTIFIER ::= { extremeAgent 3 } extremePort OBJECT IDENTIFIER ::= { extremeAgent 4 } extremeVC OBJECT IDENTIFIER ::= { extremeAgent 5 } extremeTrapPoll OBJECT IDENTIFIER ::= { extremeAgent 6 } extremeQosPolicy OBJECT IDENTIFIER ::= { extremeAgent 7 } extremeDlcs OBJECT IDENTIFIER ::= { extremeAgent 8 } extremeFileTransfer OBJECT IDENTIFIER ::= { extremeAgent 10 } extremeRtStats OBJECT IDENTIFIER ::= { extremeAgent 11 } extremeEsrp OBJECT IDENTIFIER ::= { extremeAgent 12 } extremeEdp OBJECT IDENTIFIER ::= { extremeAgent 13 } PortList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. If the object has a length of 0 then it is taken to refer to all of the ports in a given device." SYNTAX OCTET STRING L4Port ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of a transport layer (layer-4) port number, in network byte order. A value of 0 indicates all allowed values of this field i.e. wildcard." SYNTAX INTEGER (0|1..65535) ExtremeGenAddr ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of an address." SYNTAX OCTET STRING (SIZE (0..20)) ExtremeDeviceId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The switch identifier used by Extreme EDP protocol." SYNTAX OCTET STRING (SIZE (8)) END -- =========================================================================== -- -- Extreme System objects -- EXTREME-SYSTEM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC DisplayString FROM RFC1213-MIB extremeAgent FROM EXTREME-BASE-MIB PortList FROM EXTREME-BASE-MIB; extremeSystem MODULE-IDENTITY LAST-UPDATED "9801090000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme System objects: objects common to all platforms" ::= { extremeAgent 1 } extremeSystemCommon OBJECT IDENTIFIER ::= { extremeSystem 1 } -- -- System group -- -- Objects common to all platforms -- -- Configuration save objects. These objects are used by the network -- management application to save configuration changes into the -- persistant store. There are 2 stores on the device; a primary and -- a secondary. extremeSaveConfiguration OBJECT-TYPE SYNTAX INTEGER { saveToPrimary(1), saveToSecondary(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value of the object. The save is performed asynchronously, and the snmp agent will continue to respond to both gets and sets while the save is taking place. A network management application may use the extremeSaveStatus object to determine when the asynchronous save operation has completed." ::= { extremeSystemCommon 3 } extremeSaveStatus OBJECT-TYPE SYNTAX INTEGER { saveInProgress(1), saveNotInProgress(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object will return the status of a save operation invoked by setting the extremeSaveConfiguration object. A network management application can read this object to determine that a save operation has completed." ::= { extremeSystemCommon 4 } extremeCurrentConfigInUse OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Shows which NVRAM configuration store was used at last boot" ::= { extremeSystemCommon 5 } extremeConfigToUseOnReboot OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls which NVRAM configuration store will be used on next reboot." ::= { extremeSystemCommon 6 } extremeOverTemperatureAlarm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm status of overtemperature sensor in device enclosure." ::= { extremeSystemCommon 7 } extremeCurrentTemperature OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Current temperature in degrees celcius measured inside device enclosure." ::= { extremeSystemCommon 8 } -- -- Table of operational status of all internal Fans -- extremeFanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeFanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of operational status of all internal cooling fans." ::= { extremeSystemCommon 9 } extremeFanStatusEntry OBJECT-TYPE SYNTAX ExtremeFanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in table of all internal cooling fans." INDEX { extremeFanNumber } ::= { extremeFanStatusTable 1 } ExtremeFanStatusEntry ::= SEQUENCE { extremeFanNumber INTEGER, extremeFanOperational TruthValue } extremeFanNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Identifier of cooling fan, numbered from the front and/or left side of device." ::= { extremeFanStatusEntry 1 } extremeFanOperational OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of a cooling fan." ::= { extremeFanStatusEntry 2 } extremePrimaryPowerOperational OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of internal power supply of a device." ::= { extremeSystemCommon 10 } extremeRedundantPowerStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), presentOK(2), presentNotOK(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of an external redundant power supply to a device." ::= { extremeSystemCommon 11 } extremeRedundantPowerAlarm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition." ::= { extremeSystemCommon 12 } extremePrimarySoftwareRev OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device." ::= { extremeSystemCommon 13 } extremeSecondarySoftwareRev OBJECT-TYPE SYNTAX DisplayString (SIZE(0..15)) MAX-ACCESS read-only STATUS current DESCRIPTION "The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This will also be reported in RMON2 probeSoftwareRev if this is the software image currently running in the device." ::= { extremeSystemCommon 14 } extremeImageToUseOnReboot OBJECT-TYPE SYNTAX INTEGER { primary(1), secondary(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls which image will be used on next reboot." ::= { extremeSystemCommon 15 } extremeSystemID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..126)) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the System ID of the Summit Switch." ::= { extremeSystemCommon 16 } extremeSystemBoardID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..126)) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the Board ID of the Summit Switch." ::= { extremeSystemCommon 17 } extremeSystemLeftBoardID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..126)) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the Left Board ID of the Summit Switch." ::= { extremeSystemCommon 18 } extremeSystemRightBoardID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..126)) MAX-ACCESS read-only STATUS current DESCRIPTION "This represents the Right Board ID of the Summit Switch." ::= { extremeSystemCommon 19 } -- Add variables to report power supply data extremeInputPowerVoltage OBJECT-TYPE SYNTAX INTEGER { v110 (1), v220 (2), v48DC (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The input power voltage at which the system is currently operating." ::= { extremeSystemCommon 20 } extremePowerStatus OBJECT-TYPE SYNTAX INTEGER { notPresent(1), presentOK(2), presentNotOK(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Operational status of the power supply to a device." ::= { extremeSystemCommon 21 } extremePowerAlarm OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Alarm state of the power supply to a device. Alarm state indicates either fan failure or overtemperature condition." ::= { extremeSystemCommon 22 } extremeRmonEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to true will cause the agent to start collecting RMON statistics." ::= { extremeSystemCommon 23 } --------------------------------------------------------------------------- -- Objects specific to Chassis products extremeChassisGroup OBJECT IDENTIFIER ::= { extremeSystem 2} extremeMasterMSMSlot OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The extremeSlotNumber of the master MSM module." ::= { extremeChassisGroup 1 } extremeSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about each slot in the chassis." ::= { extremeChassisGroup 2 } extremeSlotEntry OBJECT-TYPE SYNTAX ExtremeSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing information about the module in each slot of the chassis." INDEX { extremeSlotNumber } ::= { extremeSlotTable 1 } ExtremeSlotEntry ::= SEQUENCE { extremeSlotNumber INTEGER, extremeSlotName DisplayString, extremeSlotModuleConfiguredType INTEGER, extremeSlotModuleInsertedType INTEGER, extremeSlotModuleState INTEGER, extremeSlotModuleSerialNumber DisplayString } -- extremeSlotModuleCurrentTemp INTEGER, -- extremeSlotModuleOvertempAlarm INTEGER extremeSlotNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "A unique integer identifying the particular slot in the chassis." ::= { extremeSlotEntry 1 } extremeSlotName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A name identifying the particular slot in the chassis." ::= { extremeSlotEntry 2 } extremeSlotModuleConfiguredType OBJECT-TYPE SYNTAX INTEGER { none(1), fe32(2), g4x(3), g6x(4), fe32fx(5), msm(6), f48ti(7), g8xi(8), g8sxi(9), msm64i(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "The configured module type for the given slot. At startup, the module-type is none(1). It is possible to configure the module-type even if there is no module in the slot. If the current module in the slot is different than the requested configured module-type, then the current configuration for the module is erased and the card will be restarted. The new configured module-type will be recorded. Since the configured module type is different than the actual module type, a moduleMismatch trap will be sent, and the extremeSlotModuleState for that module will show a mismatch(3). Setting this variable to none(1) will clear the previously assigned module-type of this slot, and all configuration information related to the slot will be erased." ::= { extremeSlotEntry 3 } extremeSlotModuleInsertedType OBJECT-TYPE SYNTAX INTEGER { none(1), fe32(2), ge4(3), ge6(4), fe32fx(5), msm(6), f48ti(7), g8xi(8), g8sxi(9), msm64i(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The module type inserted into the slot. It is possible to have a slot inserted into the slot even though extremeSlotConfiguredType is none(1)." ::= { extremeSlotEntry 4 } extremeSlotModuleState OBJECT-TYPE SYNTAX INTEGER { notPresent(1), testing(2), mismatch(3), failed(4), operational(5), powerdown(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the module inserted in this slot." ::= { extremeSlotEntry 5 } extremeSlotModuleSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the module inserted in this slot." ::= { extremeSlotEntry 6 } -- extremeSlotModuleCurrentTemp OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Current temperature in degrees celcius on the module." -- ::= { extremeSlotEntry 7 } -- -- extremeSlotModuleOvertempAlarm OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Alarm status of overtemperature sensor on the module." -- ::= { extremeSlotEntry 8 } END -- ========================================================================= -- -- Extreme VLAN objects -- EXTREME-VLAN-MIB DEFINITIONS ::= BEGIN -- ========================================================================= -- -- Interpretation of the Interface Table for VLAN and encapsulation -- interfaces: -- -- OBJECT VALUE/USE -- -- ifIndex Same interpretation as RFC1573. A unique value, -- greater than zero for each VLAN/Encapsulation interface. -- -- ifDescr Same interpretation as RFC1573. A textual string -- containing information about the interface. This -- string should include the name of the manufacturer, -- the product name, the version of the software, and that -- the entry is a vlan or encapsulation interface. -- -- Example: "VLAN Red" -- Example: "802.1Q Encapsulation Tag 004" -- -- ifType propVirtual(53) -- -- ifMtu Equivalent to the least common denominator MTU of the -- set of ports associated with the VLAN or ENCAPS interface. -- For example, if the VLAN contains one ethernet port, then -- the value of this object is 1518. If the VLAN contains -- all FDDI ports, the value of this object is 4500. If -- a vlan contains a mix of ethernet and FDDI ports, the -- value of this object is 1518. If there are no ports associated -- with the interface, then the ifMtu is zero. -- -- ifSpeed The value of this object is zero, as defined by RFC1573 -- for sub-layers that have no concept of bandwidth. -- -- ifPhysAddress The value of this object is always equal to a null octet -- string. -- -- ifAdminStatus Always equal to up(1). SetRequest-PDUs fail. -- -- ifOperStatus The value of this object is equal to up(1) if the -- ifOperStatus of at least one port in in the set of ports -- stacked below the VLAN layer is up(1). The value of this -- object is down(2) if the ifOperStatus of all ports stacked -- below the vlan layer is down(2). The value of this -- object is down(2) if there are no ports stacked below the -- the vlan sublayer. -- -- ifLastChange Same interpretation as RFC1573. The value of sysUpTime -- at the time the interface entered its current operational -- state. If the current state was entered prior to the -- last re-initialization of the local network management -- subsystem, then this object contains a zero value. -- -- ifInOctets These objects return NO_SUCH_NAME on reads and writes. -- ifInUcastPkts This approach is more desireable than returning zero -- ifInNUcastPkt on reads because NMS's cannot differentiate between -- ifInDiscards returning a zero for non-support vs returning a real -- ifInErrors zero value for the counter. Inability to distinguish -- ifInUnknownProtos between these two cases would essentially prevent -- ifOutOctets future implementation of these objects, therefore -- ifOutUcastPkts NO_SUCH_NAME is returned to indicate no-support. -- ifOutNUcastPkts Future implementations may choose to return real values -- ifOutDiscards for these counters. -- ifOutDiscards " -- ifOutErrors " -- ifLinkUpDownTrapEnable " -- ifConnectorPresent " -- ifHighSpeed " -- ifName " -- -- ifOutQLen Deprecated in RFC1573. Set to zero if present. -- ifSpecific Deprecated in RFC1573. Set to {0.0} if present. -- -- linkUp TRAP Not supported for the vlan/encaps sublayers -- linkDown TRAP Not supported for the vlan/encaps sublayer -- -- ====================================================================== IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM SNMPv2-SMI IpAddress FROM SNMPv2-SMI extremeAgent FROM EXTREME-BASE-MIB PortList FROM EXTREME-BASE-MIB extremeSlotNumber FROM EXTREME-SYSTEM-MIB; extremeVlan MODULE-IDENTITY LAST-UPDATED "9810120000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme Virtual LAN objects" ::= { extremeAgent 2 } -- -- The objects are arranged into the following groups: -- extremeVlanGroup OBJECT IDENTIFIER ::= { extremeVlan 1 } extremeVirtualGroup OBJECT IDENTIFIER ::= { extremeVlan 2 } extremeEncapsulationGroup OBJECT IDENTIFIER ::= { extremeVlan 3 } extremeVlanIpGroup OBJECT IDENTIFIER ::= { extremeVlan 4 } extremeProtocolGroup OBJECT IDENTIFIER ::= { extremeVlan 5 } extremeVlanOpaqueGroup OBJECT IDENTIFIER ::= { extremeVlan 6 } extremeVlanStackGroup OBJECT IDENTIFIER ::= { extremeVlan 7 } -- -- -- Extreme Networks Vlan Type Textual Convention -- -- vlanLayer2(1) = The globally identified VLAN interface is protocol -- independent and based on port grouping. The configuration of -- port grouping is controlled through the ifStackTable. -- ExtremeVlanType ::= INTEGER { vlanLayer2(1) } -- -- All groups in this MIB are optional. Support for a -- particular group is dependent upon the capabilities -- of the network device. -- -- The VLAN Group -- -- The VLAN mapping group contains objects for -- identifying VLANs within a device, and for mapping -- these VLANs to a global identifier. It consists of the -- extremeVlanGlobalMappingTable and the extremeVlanIfTable. -- -- The Virtual Group -- -- The virtual group contains the extremeNextVirtIfIndex object. -- In the future, other groups and object will be added as -- capabilities are added. -- -- The Encapsulation Group -- -- The Encapsulation Group contains objects for identifying -- and configuring encapsulation entries within a device. -- It consists of the extremeVlanEncapsIfTable. -- -- The Forwarding Database Group -- -- Contains objects for managing MAC-layer FDBs, including -- the extremeVlanDot1qStaticTable -- -- The Extreme Networks VLAN Global Mapping Table -- -- This table is implemented by all Extreme Networks network devices -- that support interfaces to globally identified VLANs. -- extremeVlanGlobalMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeVlanGlobalMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists VLAN interfaces that are globally identified. A single entry exists in this list for each VLAN interface in the system that is bound to a global identifier." ::= { extremeVlanGroup 1 } extremeVlanGlobalMappingEntry OBJECT-TYPE SYNTAX ExtremeVlanGlobalMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An individual VLAN interface global mapping entry. Entries in this table are created by setting the extremeVlanIfGlobalIdentifier object in the extremeVlanIfTable to a non-zero value." INDEX { extremeVlanGlobalMappingIdentifier } ::= { extremeVlanGlobalMappingTable 1 } ExtremeVlanGlobalMappingEntry ::= SEQUENCE { extremeVlanGlobalMappingIdentifier INTEGER (0..65535), extremeVlanGlobalMappingIfIndex INTEGER } extremeVlanGlobalMappingIdentifier OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index into the extremeVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN interface. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same." ::= { extremeVlanGlobalMappingEntry 1 } extremeVlanGlobalMappingIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of extremeVlanIfIndex for the VLAN interface in the extremeVlanIfTable, which is bound to the global identifier specified by this entry." ::= { extremeVlanGlobalMappingEntry 2 } -- -- The Extreme Networks VLAN Interface Table -- -- This table is implemented by all Extreme Networks network devices -- that support VLAN interfaces. -- extremeVlanIfTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeVlanIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be created, destroyed and/or mapped to a globally identified vlan." ::= { extremeVlanGroup 2 } extremeVlanIfEntry OBJECT-TYPE SYNTAX ExtremeVlanIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object." INDEX { extremeVlanIfIndex } ::= { extremeVlanIfTable 1 } ExtremeVlanIfEntry ::= SEQUENCE { extremeVlanIfIndex INTEGER, extremeVlanIfDescr DisplayString, extremeVlanIfType ExtremeVlanType, extremeVlanIfGlobalIdentifier INTEGER, extremeVlanIfStatus RowStatus } extremeVlanIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object." ::= { extremeVlanIfEntry 1 } extremeVlanIfDescr OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is a description of the VLAN interface." ::= {extremeVlanIfEntry 2} extremeVlanIfType OBJECT-TYPE SYNTAX ExtremeVlanType MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN interface type." ::= { extremeVlanIfEntry 3 } extremeVlanIfGlobalIdentifier OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. The binding between a global identifier and a VLAN interface can be created or removed. To create a binding an NMS must write a non-zero value to this object. To delete a binding, the NMS must write a zero to this object. The value 1 is reserved for the default VLAN and this cannot be deleted or re-assigned." ::= { extremeVlanIfEntry 4 } extremeVlanIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to createAndWait(5) causes a row in this table to be created. The agent sets the status to notInService(2) if all of the information is present in the row and the values are acceptable to the agent; otherwise, the agent sets the status to notReady(3). Setting this object to active(1) is only valid when the current status is active(1) or notInService(2). When the state of the row transitions is set to active(1), the agent creates the corresponding row in the ifTable. Setting this object to destroy(6) will remove the corresponding VLAN interface, remove the entry in this table, and the corresponding entries in the extremeVlanGlobalMappingTable and the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any stacking dependencies in the ifStackTable and any protocol specific tables dependencies." ::= { extremeVlanIfEntry 6 } -- -- The Extreme Networks VLAN Encapsulation Interface Table -- -- VLAN Encapsulation refers to the ability to multiplex -- several VLANs over a single network segment by explicitly -- labeling eack packet with a tag that identifies the packet's -- VLAN membership. -- -- The only tagging scheme supported by this MIB is IEEE 802.1Q -- Some ports support tagging, some don't. For ports that support -- tagging, they may have some VLANs that operate in tagging mode, -- some not in tagging mode. -- -- The encapsulation interface will be creatable by the NMS using -- the extremeVlanIfTable. This table will allow the NMS to define -- certain attributes of the encapsulation including an encapsulation -- algorithm and a tag value. Using the ifStack table, an encapsulation -- interface may be stacked underneath a VLAN interface and on top of port(s). -- -- Example ifTable Stacking: -- -- +=======================+=======================+ -- | VLAN Xface 9 | VLAN Xface 11 | -- +=======================+=======================+ -- +=======================+ -- | ENCAPS Xface 10 | -- +=======================+ -- +=====+=====+=====+=====+=====+=====+=====+=====+ -- | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |<=== Ports -- +=====+=====+=====+=====+=====+=====+=====+=====+ -- -- ifStackTable Instances: -- ifStackHigher ifStackLower -- 0 9 -- 0 11 -- 1 0 -- 2 0 -- 3 0 -- 4 0 -- 9 10 -- 10 1 -- 10 2 -- 10 3 -- 10 4 -- 11 5 -- 11 6 -- 11 7 -- 11 8 -- -- A stack that contains a VLAN, encapsulation and a port interface, -- specifies: -- -- * For packets received through the given port that use the given -- encapsulation scheme and contain the given tag, those packets -- are members of the given VLAN. -- -- * For unencapsulated packets from the given VLAN that are to be -- transmitted out the given port, those packets must first be -- encapsulated using the given encapsulation algorithm and tag. -- -- This table is implemented by all Extreme Networks network devices -- that support the encapsulation of multiple VLANs over a single -- interface. ExtremeVlanEncapsType ::= INTEGER { vlanEncaps8021q(1) } extremeVlanEncapsIfTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeVlanEncapsIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the system. A VLAN encapsulation interface may be created or destroyed." ::= { extremeEncapsulationGroup 1 } extremeVlanEncapsIfEntry OBJECT-TYPE SYNTAX ExtremeVlanEncapsIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the extremeNextAvailableVirtIfIndex object. Row creation in this table will fail if the chosen index value does not match the current value returned from the extremeNextAvailableVirtIfIndex object." INDEX { extremeVlanEncapsIfIndex } ::= { extremeVlanEncapsIfTable 1 } ExtremeVlanEncapsIfEntry ::= SEQUENCE { extremeVlanEncapsIfIndex INTEGER, extremeVlanEncapsIfType ExtremeVlanEncapsType, extremeVlanEncapsIfTag INTEGER, extremeVlanEncapsIfStatus RowStatus } extremeVlanEncapsIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by reading the extremeNextAvailableVirtIfIndex object." ::= { extremeVlanEncapsIfEntry 1 } extremeVlanEncapsIfType OBJECT-TYPE SYNTAX ExtremeVlanEncapsType MAX-ACCESS read-create STATUS current DESCRIPTION "The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface." ::= {extremeVlanEncapsIfEntry 2} extremeVlanEncapsIfTag OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface." ::= { extremeVlanEncapsIfEntry 3 } extremeVlanEncapsIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notReady(3). In order for a row to become active, the NMS must set extremeVlanEncapsIfTagType and extremeVlanEncapsIfTag to some valid and consistent values. Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row, the agent will create the row and change the status to active(1). If any of the necessary objects are not available, or specify an invalid configuration, the row will not be created and the agent will return an appropriate error. Setting this object to createAndWait(5) causes a row in in this table to be created. If all necessary objects in the row have been assigned values and specify a valid configuration, the status of the row will be set to notInService(2); otherwise, the status will be set to notReady(3). This object may only be set to createAndGo(4) or createAndWait(5) if it does not exist. Setting this object to active(1) when the status is notInService(2) causes the agent to commit the row. Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to destroy(6) will remove the corresponding VLAN encapsulation interface, remove the entry in this table, and remove the corresponding entry in the ifTable. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any references to this interface in the ifStackTable." ::= { extremeVlanEncapsIfEntry 4 } -- -- The extremeNextAvailableVirtIfIndex -- extremeNextAvailableVirtIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The current value of this object is changed to a new value when the current value is written to an agent's table, that is indexed by ifIndex. Row creation using the current value of this object, allocates a virtual ifIndex. Note the following: 1. A newly created row does not have to be active(1) for the agent to allocate the virtual ifIndex. 2. Race conditions between multiple NMS's end when a row is created. Rows are deemed created when a setRequest is successfully committed (i.e. the errorStats is noError(0)). 3. An agent that exhausts its supply of virual ifIndex values returns zero as the value of this object. This can be used by an NMS as an indication to deleted unused rows and reboot the device." ::= { extremeVirtualGroup 1 } -- -- The IP VLAN Interface Information Table -- -- The IP VLAN Interface Information table is supported by -- network devices that support IP VLAN interfaces. -- -- A row must be created in this table for each IP -- VLAN interface. The index used is the -- same index as that used to create the IP VLAN interface -- in the extremeVlanIfTable. -- extremeVlanIpTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeVlanIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IP VLAN interface information entries. Entries in this table are related to entries in the extremeVlanIfTable by using the same index." ::= { extremeVlanIpGroup 1 } extremeVlanIpEntry OBJECT-TYPE SYNTAX ExtremeVlanIpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A extremeVlanIpEntry contains layer 3 information about a particular IP VLAN interface." INDEX { extremeVlanIfIndex } ::= { extremeVlanIpTable 1 } ExtremeVlanIpEntry ::= SEQUENCE { extremeVlanIpNetAddress IpAddress, extremeVlanIpNetMask IpAddress, extremeVlanIpStatus RowStatus } extremeVlanIpNetAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP network number for the IP VLAN interface defined in the extremeVlanIfTable identified with the same index." ::= { extremeVlanIpEntry 1 } extremeVlanIpNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP network mask corresponding to the IP Network address defined by extremeVlanIpIpNetAddress. " ::= { extremeVlanIpEntry 2 } extremeVlanIpStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) destroy(6) The following values may be read: active(1) Setting this object to active(1) or createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the row creation request. Setting this object to createAndWait(5) is not supported. When the status changes to active(1), the agent applies the IP parmeters to the IP VLAN interface identified by the corresponding value of the extremeVlanIpIndex object. Setting this object to destroy(6) will remove the IP parmeters from the IP VLAN interface and remove the entry from this table." ::= { extremeVlanIpEntry 3 } -- -- Protocol Definition Table -- -- we choose to define our own table as existing tables are -- overcomplex (RMON Protocol MIB, etc.) -- extremeVlanProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeVlanProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of defined combinations of protocol IDs that make up one protocol definition name. All members of one protocol definition share the same extremeVlanProtocolIndex. A given protocol ID may appear in the definition of just one protocol definition. This table will typically contain some default entries for popular protocols chosen by ExtremeWare." ::= { extremeProtocolGroup 1 } extremeVlanProtocolEntry OBJECT-TYPE SYNTAX ExtremeVlanProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One member protocol ID of a protocol definition." INDEX { extremeVlanProtocolIndex, extremeVlanProtocolIdIndex } ::= { extremeVlanProtocolTable 1 } ExtremeVlanProtocolEntry ::= SEQUENCE { extremeVlanProtocolIndex INTEGER, extremeVlanProtocolIdIndex INTEGER, extremeVlanProtocolName DisplayString, extremeVlanProtocolDllEncapsType INTEGER, extremeVlanProtocolId INTEGER, extremeVlanProtocolStatus RowStatus } extremeVlanProtocolIndex OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare)." ::= { extremeVlanProtocolEntry 1 } extremeVlanProtocolIdIndex OBJECT-TYPE SYNTAX INTEGER (0..6) MAX-ACCESS read-create STATUS current DESCRIPTION "An index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per extremeVlanProtocolIndex (up to 6 in ExtremeWare)." ::= { extremeVlanProtocolEntry 2 } extremeVlanProtocolName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "A human-readable string representing this protocol. This string should be the same for all entries sharing a given extremeVlanProtocolIndex. A ExtremeVlanProtocolEntry with extremeVlanProtocolName of ANY represents a match on all protocols: this entry may not be modified." ::= { extremeVlanProtocolEntry 3 } extremeVlanProtocolDllEncapsType OBJECT-TYPE SYNTAX INTEGER { any(1), ethertype(2), llc(3), llcSnapEthertype(4), none(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the type of data-link encapsulation in which the extremeVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and matches all encapsulations and protocol IDs that are not explicitly mentioned in this table. Entries of type any(1) may not be created. The value none(5) is used to indicate that no protocol IDs match this entry. A value of none(5) may not be set by a manager." ::= { extremeVlanProtocolEntry 4 } extremeVlanProtocolId OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a concatenation of LLC DSAP+SSAP in network byte order. This value is not valid for extremeVlanProtocolDllEncapsType values of any(1) or none(5)." ::= { extremeVlanProtocolEntry 5 } extremeVlanProtocolStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { extremeVlanProtocolEntry 6 } -- -- Protocol-based VLAN Table -- extremeVlanProtocolVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeVlanProtocolVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to apply one of the protocol definitions in extremeVlanProtocolTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited number of protocols may be applied simultaneously in one device (up to 8 in ExtremeWare)." ::= { extremeProtocolGroup 2 } extremeVlanProtocolVlanEntry OBJECT-TYPE SYNTAX ExtremeVlanProtocolVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A mapping of untagged packets of one protocol onto a particular VLAN." INDEX { extremeVlanProtocolVlanIfIndex, extremeVlanProtocolVlanProtocolIndex } ::= { extremeVlanProtocolVlanTable 1 } ExtremeVlanProtocolVlanEntry ::= SEQUENCE { extremeVlanProtocolVlanIfIndex INTEGER, extremeVlanProtocolVlanProtocolIndex INTEGER, extremeVlanProtocolVlanStatus RowStatus } extremeVlanProtocolVlanIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the extremeNextAvailableVirtIfIndex object." ::= { extremeVlanProtocolVlanEntry 1 } extremeVlanProtocolVlanProtocolIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7 in ExtremeWare)." ::= { extremeVlanProtocolVlanEntry 2 } extremeVlanProtocolVlanStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { extremeVlanProtocolVlanEntry 3 } -- -- The Extreme Networks VLAN Opaque Table -- -- This table is implemented by all Extreme Networks network devices -- that support VLAN interfaces. -- extremeVlanOpaqueTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeVlanOpaqueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the ports associated with each VLAN interface." ::= { extremeVlanOpaqueGroup 1 } extremeVlanOpaqueEntry OBJECT-TYPE SYNTAX ExtremeVlanOpaqueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This represents the tagged and untagged ports on each slot per vlan." INDEX { extremeVlanIfIndex, extremeSlotNumber } ::= { extremeVlanOpaqueTable 1 } ExtremeVlanOpaqueEntry ::= SEQUENCE { extremeVlanOpaqueTaggedPorts PortList, extremeVlanOpaqueUntaggedPorts PortList } extremeVlanOpaqueTaggedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Each bit in the octet string represents one port. A 1 means that the port is a tagged port in that vlan. The bit value for a port is 0 otherwise." ::= { extremeVlanOpaqueEntry 1} extremeVlanOpaqueUntaggedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "Each bit in the octet string represents one port. A 1 means that the port is an untagged port in that vlan. The bit value for a port is 0 otherwise." ::= { extremeVlanOpaqueEntry 2 } -- -- The Extreme Networks VLAN Stack Table -- -- This table is essentially the ifStackTable without entries for any ports -- extremeVlanStackTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeVlanStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents those components of the ifStackTable that do not contain a Physical interface." ::= { extremeVlanStackGroup 1 } extremeVlanStackEntry OBJECT-TYPE SYNTAX ExtremeVlanStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this read-only table defines which interfaces are on top of which one. All information in the table is also contained in ifStackTable. The Physical interfaces in the ifStackTable are not represented here." INDEX { extremeVlanStackHigherLayer, extremeVlanStackLowerLayer } ::= { extremeVlanStackTable 1 } ExtremeVlanStackEntry ::= SEQUENCE { extremeVlanStackHigherLayer INTEGER, extremeVlanStackLowerLayer INTEGER } extremeVlanStackHigherLayer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The higher layer in the logical vlan hierarchy." ::= { extremeVlanStackEntry 1} extremeVlanStackLowerLayer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The lower layer in the logical vlan hierarchy." ::= { extremeVlanStackEntry 2 } END -- =============================================================================== -- -- Extreme QoS objects -- EXTREME-QOS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC DisplayString FROM RFC1213-MIB RowStatus FROM SNMPv2-TC extremeVlanIfIndex FROM EXTREME-VLAN-MIB extremeAgent FROM EXTREME-BASE-MIB; extremeQos MODULE-IDENTITY LAST-UPDATED "9803030000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme Quality-of-Service objects" ::= { extremeAgent 3 } extremeQosCommon OBJECT IDENTIFIER ::= { extremeQos 1 } extremeUnitPaceMode OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), normalEthernet(2), lowLatency(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies whether the device currently recognises and gives priority treatment to the forwarding of packets with the PACE(tm) bit set in their MAC Source Address fields. PACE(tm) mode applies to the whole unit only and is only valid when device is in Ingress QoS mode as specified by extremeQosMode ingress(1). This object will report notApplicable(1) when in egress(2) mode. Set operations with value notApplicable(1) will be rejected." ::= { extremeQosCommon 1 } -- -- Select QoS Mode -- extremeQosMode OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which QoS mode the device should use. ingress(1) applies priority-based QoS based on the incoming packet's destination IP or MAC address, 802.1p priority, PACE(tm), Source Port or VLAN. egress(2) applies priority- and bandwidth-based QoS based on destination IP or MAC address or VLAN. See ExtremeWare documentation for further information." ::= { extremeQosCommon 4 } -- -- Reset all QoS settings to defaults -- extremeQosUnconfigure OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to true will reset all QoS settings in the device to factory defaults. Reads from this value return an undefined value." ::= { extremeQosCommon 5 } -- -- QoS Profile table -- extremeQosProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeQosProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists QoS profiles." ::= { extremeQosCommon 6 } extremeQosProfileEntry OBJECT-TYPE SYNTAX ExtremeQosProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An individual QoS profile Entry." INDEX {extremeQosProfileIndex} ::= {extremeQosProfileTable 1} ExtremeQosProfileEntry ::= SEQUENCE { extremeQosProfileIndex INTEGER, extremeQosProfileName DisplayString, extremeQosProfileMinBw INTEGER, extremeQosProfileMaxBw INTEGER, extremeQosProfilePriority INTEGER, extremeQosProfileRowStatus RowStatus } extremeQosProfileIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "An index that uniquely identifies an entry in the qos table." ::= { extremeQosProfileEntry 1} extremeQosProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-create STATUS current DESCRIPTION "A unique qos profile name." ::= {extremeQosProfileEntry 2} extremeQosProfileMinBw OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The minumum percentage of bandwidth that this queue requires. The Switch is required to provide the minumum amount of bandwidth to the queue. The lowest possible value is 0%." DEFVAL { 0 } ::= {extremeQosProfileEntry 3 } extremeQosProfileMaxBw OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum percentage of bandwidth that this queue is permitted to use. If a non-default value is set for this object then it negates any previously set value of extremeQosProfileMaxSustBwBps. In In addition, a set operation that supplies non-default values for both this object and for extremeQosProfileMaxSustBwBps will be rejected by the agent. In other words, you may supply either an absolute or a percent limit, not both." DEFVAL { 100 } ::= {extremeQosProfileEntry 4 } extremeQosProfilePriority OBJECT-TYPE SYNTAX INTEGER { low(1), lowNormal(2), normal(3), normalMedium(4), medium(5), mediumHi(6), high(7), highHi(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "The level of priority in which this queue will be serviced by the Switch." ::= {extremeQosProfileEntry 5 } extremeQosProfileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the extremeQosProfile entry. This object can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInService(2) notReady(3). Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the contents of the objects in the row. If all necessary information is present in the row and the values are acceptible to the agent, the agent will change the status to active(1). If any of the necessary objects are not available, the agent will reject the creation request. Setting this object to createAndWait(5) causes a row in this table to be created. The agent sets the status to notInService(2) if all of the information is present in the row and the values are acceptable to the agent; otherwise, the agent sets the status to notReady(3). Setting this object to active(1) is only valid when the current status is active(1) or notInService(2). When the state of the row transitions is set to active(1), the agent creates the corresponding row in the ifTable.. Setting this object to destroy(6) will remove the corresponding QoS Profile Entry. In order for a set of this object to destroy(6) to succeed, all dependencies on this row must have been removed. These will include any stacking dependencies in the ifStackTable and any protocol specific tables dependencies." ::= { extremeQosProfileEntry 6 } -- -- VLAN-based QoS Table -- extremeQosByVlanMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeQosByVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table to associate a Vlan with the QoS profile that the Vlan is using. Every Vlan is assigned a Qos Profile and hence there is an entry in this table corresponding to every entry in the extremeVlanIfTable." ::= { extremeQosCommon 7 } extremeQosByVlanMappingEntry OBJECT-TYPE SYNTAX ExtremeQosByVlanMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The QoS associated with a particular Vlan." INDEX {extremeVlanIfIndex} ::= {extremeQosByVlanMappingTable 1} ExtremeQosByVlanMappingEntry ::= SEQUENCE { extremeQosByVlanMappingQosProfileIndex INTEGER } extremeQosByVlanMappingQosProfileIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Value of extremeQosProfileIndex that uniquely identifies a QoS Profile entry in extremeQosProfileTable. This indicates the QoS to be given to traffic for this Vlan in the absence of any other more specific configuration information for this traffic." ::= { extremeQosByVlanMappingEntry 1 } END -- =============================================================================== -- -- Extreme Port objects -- EXTREME-PORT-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC OBJECT-TYPE FROM SNMPv2-SMI ifIndex FROM RFC1213-MIB extremeAgent FROM EXTREME-BASE-MIB; extremePort MODULE-IDENTITY LAST-UPDATED "9801090000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme network port objects" ::= { extremeAgent 4 } -- -- Load-sharing. Table exists but support removed for 6.0. -- extremePortLoadshareTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremePortLoadshareEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table of bindings between a master port and its load-sharing slaves: create/delete entries here to add/delete a port to/from a load-sharing group. Default is empty table. There are restrictions on what row creates will be accepted by each device - see Summit release notes for details." ::= { extremePort 1 } extremePortLoadshareEntry OBJECT-TYPE SYNTAX ExtremePortLoadshareEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A binding between a master port and one of its load-sharing slave ports." INDEX { extremePortLoadshareMasterIfIndex, extremePortLoadshareSlaveIfIndex } ::= { extremePortLoadshareTable 1 } ExtremePortLoadshareEntry ::= SEQUENCE { extremePortLoadshareMasterIfIndex INTEGER, extremePortLoadshareSlaveIfIndex INTEGER, extremePortLoadshareGrouping INTEGER, extremePortLoadshareStatus RowStatus } extremePortLoadshareMasterIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The ifIndex value which identifies the port controlling a loadsharing group of ports which includes extremePortLoadshareSlaveIfIndex." ::= { extremePortLoadshareEntry 1 } extremePortLoadshareSlaveIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The ifIndex value which identifies the port which is a member of a loadsharing group controlled by extremePortLoadshareMasterIfIndex." ::= { extremePortLoadshareEntry 2 } extremePortLoadshareGrouping OBJECT-TYPE SYNTAX INTEGER { other (1), pair (2), quad (4) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The Grouping value which identifies if load sharing is in pair or quad." ::= { extremePortLoadshareEntry 3 } extremePortLoadshareStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { extremePortLoadshareEntry 4 } -- Support dropped in 6.0 -- Summitlink Table extremePortSummitlinkTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremePortSummitlinkEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table of Extreme link configuration and status information. Contains a row for only those ports that are capable of operating in Summitlink-mode." ::= { extremePort 2 } extremePortSummitlinkEntry OBJECT-TYPE SYNTAX ExtremePortSummitlinkEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Link configuration and status information for a Summitlink Port." INDEX { ifIndex } ::= { extremePortSummitlinkTable 1 } ExtremePortSummitlinkEntry ::= SEQUENCE { extremePortSummitlinkAdminMode INTEGER, extremePortSummitlinkOperMode INTEGER, extremePortSummitlinkState INTEGER, extremePortSummitlinkRejectReason INTEGER } extremePortSummitlinkAdminMode OBJECT-TYPE SYNTAX INTEGER { ethernetOnly(1), summitlinkOnly(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Configurable operating mode for this Summitlink port. Configure to summitlinkOnly(1) before connecting this port to a SummitVC device." DEFVAL { ethernetOnly } ::= { extremePortSummitlinkEntry 1 } extremePortSummitlinkOperMode OBJECT-TYPE SYNTAX INTEGER { ethernetOnly(1), summitlinkOnly(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Actual Operating mode." DEFVAL { ethernetOnly } ::= { extremePortSummitlinkEntry 2 } extremePortSummitlinkState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Current status of a Summitlink link. Where a port has redundant PMD capability, this indicates up if either of the PMDs has an active link." ::= { extremePortSummitlinkEntry 3 } extremePortSummitlinkRejectReason OBJECT-TYPE SYNTAX INTEGER { none(1), other(2), stackMisconnected(3) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "If a Summitlink connection has been attempted and failed to reach the up(1) state, this indicates the potential source of the failure." ::= { extremePortSummitlinkEntry 4 } -- -- New load share table for 6.0 -- extremePortLoadshare2Table OBJECT-TYPE SYNTAX SEQUENCE OF ExtremePortLoadshare2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of bindings between a master port and its load-sharing slaves: create/delete entries here to add/delete a port to/from a load-sharing group. Default is empty table. There are restrictions on what row creates will be accepted by each device - see Summit release notes for details." ::= { extremePort 3 } extremePortLoadshare2Entry OBJECT-TYPE SYNTAX ExtremePortLoadshare2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A binding between a master port and one of its load-sharing slave ports." INDEX { extremePortLoadshare2MasterIfIndex, extremePortLoadshare2SlaveIfIndex } ::= { extremePortLoadshare2Table 1 } ExtremePortLoadshare2Entry ::= SEQUENCE { extremePortLoadshare2MasterIfIndex INTEGER, extremePortLoadshare2SlaveIfIndex INTEGER, extremePortLoadshare2Algorithm INTEGER, extremePortLoadshare2Status RowStatus } extremePortLoadshare2MasterIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value which identifies the port controlling a loadsharing group of ports which includes extremePortLoadshareSlaveIfIndex." ::= { extremePortLoadshare2Entry 1 } extremePortLoadshare2SlaveIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value which identifies the port which is a member of a loadsharing group controlled by extremePortLoadshare2MasterIfIndex." ::= { extremePortLoadshare2Entry 2 } extremePortLoadshare2Algorithm OBJECT-TYPE SYNTAX INTEGER { ingressPortOffset (1), hash (2), roundRobin (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This value identifies the load sharing algorithm to be used for this group of load shared ports." ::= { extremePortLoadshare2Entry 3 } extremePortLoadshare2Status OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { extremePortLoadshare2Entry 4 } END -- ============================================================================ -- Support dropped in 6.0 -- -- Extreme Virtual Chassis objects -- EXTREME-VC-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC ifIndex FROM RFC1213-MIB extremeAgent FROM EXTREME-BASE-MIB; extremeVC MODULE-IDENTITY LAST-UPDATED "9801090000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme Virtual Chassis objects" ::= { extremeAgent 5 } -- -- Virtual Chassis Link Table -- extremeVCLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeVCLinkEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A table of information about any neighbouring Extreme Virtual Chassis device. Only contains valid data for ports that are configured to have extremePortSummitlinkAdminMode set to summitlinkOnly have an active link or have had an active link since the last time they were configured in Summitlink mode." ::= { extremeVC 1 } extremeVCLinkEntry OBJECT-TYPE SYNTAX ExtremeVCLinkEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Neighbour information for a single Summitlink Port." INDEX { ifIndex } ::= { extremeVCLinkTable 1 } ExtremeVCLinkEntry ::= SEQUENCE { extremeVCLinkValid TruthValue, extremeVCLinkDeviceId INTEGER, extremeVCLinkPortIndex INTEGER } extremeVCLinkValid OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Flag indicating whether other columns of this table contain data." ::= { extremeVCLinkEntry 1 } extremeVCLinkDeviceId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "ID of the current SummitVC device connected to this Summitlink port." ::= { extremeVCLinkEntry 2 } extremeVCLinkPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The Summitlink subchannel number that the Summit device on the other side of the neighbouring SummitVC will use to reach this device." ::= { extremeVCLinkEntry 3 } END -- ============================================================================ -- -- Extreme Trap-based polling objects -- EXTREME-TRAPPOLL-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC Integer32, TimeTicks FROM SNMPv2-SMI trapDestIndex FROM RMON2-MIB extremeAgent FROM EXTREME-BASE-MIB; extremeTrapPoll MODULE-IDENTITY LAST-UPDATED "9801090000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme SmartTraps trap-based-polling objects" ::= { extremeAgent 6 } extremeSmartTrapRulesTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeSmartTrapRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of rules that are used to generate extremeSmartTraps." ::= { extremeTrapPoll 1 } extremeSmartTrapRulesEntry OBJECT-TYPE SYNTAX ExtremeSmartTrapRulesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row in the table represents a rule." INDEX { extremeSmartTrapRulesIndex } ::= { extremeSmartTrapRulesTable 1 } ExtremeSmartTrapRulesEntry ::= SEQUENCE { extremeSmartTrapRulesIndex INTEGER, extremeSmartTrapRulesRowStatus RowStatus, extremeSmartTrapRulesDesiredOID OBJECT IDENTIFIER, extremeSmartTrapRulesSupportedOID OBJECT IDENTIFIER, extremeSmartTrapRulesOperation INTEGER, extremeSmartTrapRulesTrapDestIndex Integer32 } extremeSmartTrapRulesIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "An index into the extremeSmartTraps rules table. " ::= { extremeSmartTrapRulesEntry 1 } extremeSmartTrapRulesRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the status of row. " ::= { extremeSmartTrapRulesEntry 2 } extremeSmartTrapRulesDesiredOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "The OID for which the rule is desired. When the OID specified by this object undergoes an operation specified by extremeSmartTrapRulesOperation, then an entry in the extremeSmartTrapInstanceTable is created." ::= { extremeSmartTrapRulesEntry 3 } extremeSmartTrapRulesSupportedOID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The OID for which this entry is created. This is based on the granularity supported by the agent corresponding to the extremeSmartTrapRulesDesiredOID that the management station desires. This object has a value that is a prefix of, or is equal to the value of ExtremeSmartTrapRulesDesiredOID. The agent specifes this value before setting the extremeSmartTrapRulesRowStatus to active." ::= { extremeSmartTrapRulesEntry 4 } extremeSmartTrapRulesOperation OBJECT-TYPE SYNTAX INTEGER { add(1), delete(2), modify(3), any(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The write operations on extremeSmartTrapRulesDesiredOID for which extremeSmartTrapsInstanceEntry should be created." ::= { extremeSmartTrapRulesEntry 5 } extremeSmartTrapRulesTrapDestIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "A pointer to a row in RMON2's trapDestTable that was created by the management station that defined this rule. Any extremeSmartTraps generated by this agent due to this rule will be sent to the trapDestCommunity/ trapDestAddress and will include trapDestOwner specified by this trapDestTable entry. This also allows a manager to identify if the rule was defined by itself, or by another (possibly older) instance of the management server process. The manager should initiate a poll only for traps received which indicate its own rules. Subprocesses within a single manager might also uniquely create their own entries within trapDestTable using different trapDestOwner strings: when a trap is received, the manager can authenticate if the trap was generated due to one of its rules and route the notification to the appropriate subprocess." ::= { extremeSmartTrapRulesEntry 6 } -- -- Table for storing information about the occurence of changes -- according to the rules in extremeSmartTrapRulesTable. -- -- This is a read-only table maintained by the agent. extremeSmartTrapInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeSmartTrapInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table representing containing information about which variables have changed according to the rules defined in extremeSmartTrapRulesTable." ::= { extremeTrapPoll 2 } extremeSmartTrapInstanceEntry OBJECT-TYPE SYNTAX ExtremeSmartTrapInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry corresponding to a change in value of one of the OIDs defined in extremeSmartTrapRulesTable. Entries are indexed by a pointer to the relevant row in RMON2 trapDestTable that a manager created in order to receive trap notifications of these events. Entries are created in this table whenever the value of one of the OIDs defined by extremeSmartTrapRulesSupportedOID changes. Entries are deleted when a get or get-next operation is performed on that entry. A get operation for a non-existent entry returns a noSuchInstance error." INDEX { trapDestIndex, extremeSmartTrapInstanceSubindex } ::= { extremeSmartTrapInstanceTable 1 } ExtremeSmartTrapInstanceEntry ::= SEQUENCE { extremeSmartTrapInstanceSubindex INTEGER, extremeSmartTrapInstanceRule INTEGER, extremeSmartTrapInstanceChangedOid OBJECT IDENTIFIER, extremeSmartTrapInstanceActualOperation INTEGER, extremeSmartTrapInstanceChangeTime TimeTicks } extremeSmartTrapInstanceSubindex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "An additional index into the table of extremeSmartTrap instance data. Each row which has the same OID for the same management station (i.e. same cookie) is assigned a unique value by the agent in order to differentiate between multiple instances." ::= { extremeSmartTrapInstanceEntry 1 } extremeSmartTrapInstanceRule OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the rule from the extremeSmartTrapRulesTable for which this entry was created." ::= { extremeSmartTrapInstanceEntry 2 } extremeSmartTrapInstanceChangedOid OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The OID value that has changed." ::= { extremeSmartTrapInstanceEntry 3 } extremeSmartTrapInstanceActualOperation OBJECT-TYPE SYNTAX INTEGER { add(1), delete(2), modify(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The operation that was recently performed on this extremeSmartTrapInstanceChangedOid." ::= { extremeSmartTrapInstanceEntry 4 } extremeSmartTrapInstanceChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The sysUpTime when this entry was created." ::= { extremeSmartTrapInstanceEntry 5 } -- -- Flush control for Trap table -- extremeSmartTrapFlushInstanceTableIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set, the agent will delete all rows from the extremeSmartTrapInstanceTable which meet the following rules: 1. The InstanceTableIndex is equal to the value obtained by taking the two most significant bytes of this integer and right-shifting it by two bytes as an unsigned int. 2. The InstanceTableSubIndex is less than or equal to the value obtained by masking this object value with 0x0000FFFF. If the value obtained is zero, then all rows with the specified InstanceTableIndex should be deleted." ::= { extremeTrapPoll 3 } END -- ============================================================================ -- -- Extreme Policy-Based QoS -- EXTREME-PBQOS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI TruthValue, RowStatus FROM SNMPv2-TC ifEntry FROM IF-MIB OwnerString FROM RMON-MIB extremeAgent, PortList, L4Port FROM EXTREME-BASE-MIB; extremeQosPolicy MODULE-IDENTITY LAST-UPDATED "9903030000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme QoS Policy configuration objects" ::= { extremeAgent 7 } -- -- ============================================================================ -- Rules -- ============================================================================ -- -- Policy rules are used to define the forwarding behaviour of either data -- traffic or of signaling messages e.g. RSVP. At the ExtremeWare device <-> -- EEM interface, rules are of the following format: -- -- ::= , , , , -- -- ::= INTEGER -- ::= signaled | inband -- ::= forward | backward | any -- -- ::= | -- , | -- , -- -- ::= | any -- ::= * | any -- ::= INTEGER | SLOT:INTEGER -- -- The following fields may be used for classification of traffic into a QoS treatment: -- - IP destination/range -- - IP source/range -- - Incoming IP Type-of-Service/mask/match -- - transport-layer ProtocolNumber (TCP,UDP,other,any) -- - TCP/UDP destination port number -- - TCP/UDP source port number -- -- These may be used in limited combinations to form compound patterns e.g. -- IntServ filterspecs based on {IP src/dest, IP protocol number, TCP/UDP -- src/dest} 5-tuples. -- -- ::= -- ::= IPADDRESS IPADDRESS -- ::= IPADDRESS IPADDRESS -- ::= tcp | udp | other | any -- ::= INTEGER(0..65535) | any -- ::= INTEGER(0..65535) | any -- -- ::= - match if IPTOS & iptosmask == iptosmatch -- ::= INTEGER 0..255 -- ::= INTEGER 0..255 -- -- N.B. IPTOS support is not available on first generation (1-G) silicon -- IPTOS values are therefore ignored in EW 5.0. -- -- Each rule is assigned an identifier, unique within each device. The rule is -- tagged as applying to either signaled data flows (i.e. RSVP) or to be -- applied directly to the data itself. The direction of flow is also specified -- : these apply to the direction of the *data* flow and indicate whether the -- rule should be applied to one or both directions of a matching data or -- signal flow. -- -- This table specifies which physical input and output ports and what traffic -- patterns are included in a rule. -- -- Note: these filter fields are in addition to the existing extremeQosByVlanMappingTable -- table. ExtremeWare currently has a fixed precedence of filter rules: VLAN has the lowest -- precedence, followed by source physicalport, 802.1p, MAC and then IP/TCP/UDP as highest -- precedence. This implies that any entry in this extremeQosFilterTable takes precedence over -- any VLAN match that might indicate a QoS profile in extremeQosByVlanMappingTable. In addition, -- any entry that indicates a that is not "any" takes precedence over a filter -- indicating an individual . Any attempt to write a rule that indicates an individual -- extremeQosRuleInPort as well as non-DEFVAL value for any of { -- } will be rejected by the agent. -- -- In other words, in the language of policy management, there is an implied rule precedence -- which is used to resolve conflicts in the case where an incoming data packet could potentially -- be classified as matching 2 or more rules. Some conflicts can be indicated at the time a -- policy rule is applied to the device but others can only be detected and resolved at the -- time a rule is invoked by an incoming message. -- extremeNextAvailableQosRuleIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the next available QoS Rule index. This object is used by an NMS to select an index value for row-creation in the extremeQosRuleTable. The current value of this object is changed to a new value when the current value is written to an agent's table. Row creation using the current value of this object allocates a extremeQosRuleIndex. Note the following: 1. A newly created row does not have to be active(1) for the agent to allocate the extremeQosRuleIndex. 2. Race conditions between multiple NMS's end when a row is created. Rows are deemed created when a setRequest is successfully committed (i.e. the errorStats is noError(0)). 3. An agent that exhausts its supply of extremeQosRuleIndex values returns zero as the value of this object. This can be used by an NMS as an indication to deleted unused rows and reboot the device." ::= { extremeQosPolicy 1 } extremeQosClearIPFdb OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to true will clear the hardware IP flow table." ::= { extremeQosPolicy 4 } extremeQosClearFdb OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to true will clear the hardware MAC flow table." ::= { extremeQosPolicy 5 } extremeQosRuleTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeQosRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of QoS policy rules. Entries that duplicate the exact same set of policy conditions are not allowed." ::= { extremeQosPolicy 2 } extremeQosRuleEntry OBJECT-TYPE SYNTAX ExtremeQosRuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in table of QoS policy rules" INDEX { extremeQosRuleIndex } ::= { extremeQosRuleTable 1 } ExtremeQosRuleEntry ::= SEQUENCE { extremeQosRuleIndex INTEGER, extremeQosRuleScope INTEGER, extremeQosRuleDirection INTEGER, extremeQosRuleInPort INTEGER, extremeQosRuleInPortMask PortList, extremeQosRuleDestAddrStart IpAddress, extremeQosRuleDestAddrEnd IpAddress, extremeQosRuleSrcAddrStart IpAddress, extremeQosRuleSrcAddrEnd IpAddress, extremeQosRuleProtocol INTEGER, extremeQosRuleDestL4PortStart L4Port, extremeQosRuleSourceL4PortStart L4Port, extremeQosRuleTosMask OCTET STRING, extremeQosRuleTosMatch OCTET STRING, extremeQosRuleQosProfileIndex INTEGER, extremeQosRuleOwner OwnerString, extremeQosRuleRowStatus RowStatus, extremeQosRuleDestL4PortEnd L4Port, extremeQosRuleSourceL4PortEnd L4Port } extremeQosRuleIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "An index into the table of QoS policy pattern rules. The index for a manager to use for creating new rows is determined by reading the value of extremeNextAvailableQosRuleIndex." ::= { extremeQosRuleEntry 1 } extremeQosRuleScope OBJECT-TYPE SYNTAX INTEGER { any (1), signaled(2), inband(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The scope of conditions in which this rule applies. The value 'signaled' means that the policy rule is applied only to QoS signaling messages e.g. RSVP. The value 'inband' means that the policy rule is applied only to data traffic passing through this node. the value 'any' means that the policy is applied to any of the above conditions. Only the value 'any' is supported in ExtremeWare 6.0." DEFVAL { any } ::= { extremeQosRuleEntry 2 } extremeQosRuleDirection OBJECT-TYPE SYNTAX INTEGER { any(1), forward(2), backward(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The direction in which this rule applies. The value 'forward' means that the rule is applied to data streams in the direction specified by the classification pattern. The value 'backward' means that the rule is applied in the reverse direction. The value 'any' means that the rule is applied for traffic in either direction of data flow. Note that the direction is applied to where the data flow itself will go, not to the direction of any signaling messages e.g. RSVP. Only the value 'forward' is supported in ExtremeWare 6.0." DEFVAL { forward } ::= { extremeQosRuleEntry 3 } extremeQosRuleInPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The ifIndex value of the physical switch input port for which this rule applies. Rules that indicate an individual value for this object have a lower precedence in ExtremeWare than rules that specify IP patterns. Conversely, rules that use IP patterns must apply to all physical ports and speficiy a value of 0 for this object. Any attempt to write a rule that indicates an individual value for this object together with non-default values for any of { extremeQosRuleDestAddrStart, extremeQosRuleDestAddrEnd, extremeQosRuleSrcAddrStart, extremeQosRuleSrcAddrEnd, extremeQosRuleProtocol, extremeQosRuleDestL4PortStart, extremeQosRuleDestL4PortEnd, extremeQosRuleSourceL4PortStart, extremeQosRuleSourceL4PortEnd and extremeQosRuleInPortMask } will be rejected by the agent." DEFVAL { 0 } ::= { extremeQosRuleEntry 4 } extremeQosRuleInPortMask OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "The list of physical switch input ports which further qualifies an IP flow. This object is an octet string with bit 5 of octet 4 indicating port number 39 where LSB is counted as 0 and MSB as 7 and the port number is zero based. Is not applicable for rules defined on physical ports that are not associated with an IP flow. Port based rules can be defined by assigning a non zero value to extremeQosRuleInPort. Any attempt to set this value without specifying the source/destination address range and/or source/destination l4 port range will be rejected by the agent. For IP flows that apply to all physical ports in the switch, this will be an octet string with all ones." ::= { extremeQosRuleEntry 5 } extremeQosRuleDestAddrStart OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The start of the destination IP address range for which this rule applies.If this object has any value other than the default then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming implicit 802.1p traffic class rule. Any attempt to write a rule that indicates a non-default value for this object together with an individual port value for extremeQosRuleInPort will be rejected by the agent." DEFVAL { '00000000'h } -- 0.0.0.0 ::= { extremeQosRuleEntry 6 } extremeQosRuleDestAddrEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The end of the destination IP address range for which this rule applies. If this object has any value other than the default then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming implicit 802.1p traffic class rule. Any attempt to write a rule that indicates a non-default value for this object together with an individual port value for extremeQosRuleInPort will be rejected by the agent." DEFVAL { 'ffffffff'h } -- 255.255.255.255 ::= { extremeQosRuleEntry 7 } extremeQosRuleSrcAddrStart OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The start of the source IP address range for which this rule applies. If this object has any value other than the default then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming implicit 802.1p traffic class rule. Any attempt to write a rule that indicates a non-default value for this object together with an individual port value for extremeQosRuleInPort will be rejected by the agent." DEFVAL { '00000000'h } -- 0.0.0.0 ::= { extremeQosRuleEntry 8 } extremeQosRuleSrcAddrEnd OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The end of the source IP address range for which this rule applies. If this object has any value other than the default then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming implicit 802.1p traffic class rule. Any attempt to write a rule that indicates a non-default value for this object together with an individual port value for extremeQosRuleInPort will be rejected by the agent." DEFVAL { 'ffffffff'h } -- 255.255.255.255 ::= { extremeQosRuleEntry 9 } extremeQosRuleProtocol OBJECT-TYPE SYNTAX INTEGER { any(1), udp(2), tcp(3), other(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The IP protocol number for which this rule applies. If this object has any value other than 'any' then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming implicit 802.1p traffic class rule. Any attempt to write a rule that indicates a non-default value for this object together with an individual port value for extremeQosRuleInPort will be rejected by the agent." DEFVAL { any } ::= { extremeQosRuleEntry 10 } extremeQosRuleDestL4PortStart OBJECT-TYPE SYNTAX L4Port MAX-ACCESS read-create STATUS current DESCRIPTION "The destination starting layer 4 port number that would be used to match an IP flow. The value of 0 means that all layer 4 information would be ignored when matching an IP flow. If this object has any value other than 0 then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming implicit 802.1p traffic class rule. Any attempt to write a rule that indicates a non-default value for this object together with an individual port value for extremeQosRuleInPort will be rejected by the agent." DEFVAL { 0 } ::= { extremeQosRuleEntry 11 } extremeQosRuleSourceL4PortStart OBJECT-TYPE SYNTAX L4Port MAX-ACCESS read-create STATUS current DESCRIPTION "The source starting layer 4 port number that would be used to match an IP flow. The value of 0 means that all layer 4 information would be ignored when matching an IP flow. If this object has any value other than 0 then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming implicit 802.1p traffic class rule. Any attempt to write a rule that indicates a non-default value for this object together with an individual port value for extremeQosRuleInPort will be rejected by the agent." DEFVAL { 0 } ::= { extremeQosRuleEntry 12 } extremeQosRuleTosMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS current DESCRIPTION "A mask for the incoming IP Type-of-Service field to be applied when matching. The value of 0 means that any incoming IP ToS field is ignored. Only the default value is supported in ExtremeWare 6.0." DEFVAL { '00'h } ::= { extremeQosRuleEntry 13 } extremeQosRuleTosMatch OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of the incoming IP Type-of-Service field, after applying a mask of extremeQosRuleTosMask, is this value then this rule is applied. Only the default value is supported in ExtremeWare 6.0." DEFVAL { '00'h } ::= { extremeQosRuleEntry 14 } extremeQosRuleQosProfileIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "A pointer into the extremeQosProfileTable indicating the QoS treatment and actions to be applied to traffic matching this rule. A value of 0 means that this traffic will be dropped/discarded. The default value is that this traffic gets the default QoS treatment and actions." DEFVAL { 1 } ::= { extremeQosRuleEntry 15 } extremeQosRuleOwner OBJECT-TYPE SYNTAX OwnerString(SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the identity of the manager that configured this entry." ::= { extremeQosRuleEntry 16 } extremeQosRuleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status for this QoS rule. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notReady(3). Setting this object to createAndGo(4) causes the agent to attempt to create and commit the row based on the existing value of the objects in the row with any changes contained in the current SET PDU applied to it. If successful, the agent will create the row and change the status to active(1). If any of the objects specify an invalid configuration, the row will not be created and the agent will return an appropriate error. Multiple active(1) entries that duplicate the exact same set of policy conditions are not allowed and attempts to set this object to createAndGo(4) will be rejected by the agent in this case. Setting this object to createAndWait(5) causes a row in in this table to be created. If all objects in the row specify a valid configuration, the status of the row will be set to notInService(2); otherwise, the status will be set to notReady(3). This object may only be set to createAndGo(4) or createAndWait(5) if it does not exist. Setting this object to active(1) when the status is notInService(2) causes the agent to commit the row. Multiple active(1) entries that duplicate the exact same set of policy conditions are not allowed and attempts to set this object to active(1) will be rejected by the agent in this case. Setting this object to active(1) when its value is already active(1) is a no-op. Setting this object to destroy(6) will remove the corresponding entry in this table." ::= { extremeQosRuleEntry 17 } extremeQosRuleDestL4PortEnd OBJECT-TYPE SYNTAX L4Port MAX-ACCESS read-create STATUS current DESCRIPTION "The destination last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that all layer 4 information would be ignored when matching an IP flow. If this object has any value other than 0 then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming implicit 802.1p traffic class rule. Any attempt to write a rule that indicates a non-default value for this object together with an individual port value for extremeQosRuleInPort will be rejected by the agent." DEFVAL { 0 } ::= { extremeQosRuleEntry 18 } extremeQosRuleSourceL4PortEnd OBJECT-TYPE SYNTAX L4Port MAX-ACCESS read-create STATUS current DESCRIPTION "The source last layer 4 port number that would determine the l4 port range to match an IP flow. The value of 0 means that all layer 4 information would be ignored when matching an IP flow. If this object has any value other than 0 then this rule takes precedence over any rule that specifies an individual physical input port, a VLAN or any incoming implicit 802.1p traffic class rule. Any attempt to write a rule that indicates a non-default value for this object together with an individual port value for extremeQosRuleInPort will be rejected by the agent." DEFVAL { 0 } ::= { extremeQosRuleEntry 19 } -- ================================================================================ -- Treatment/Action/QoSProfile -- ================================================================================ -- -- Several parameters are accessible, to a greater or lesser extent, for -- specifying the treatment received by traffic that is classified as matching -- a static rule. -- -- The following can be thought of as represented by a "per-hop behaviour" in -- IETF DiffServ terminology or by a "QoS Profile" in Extreme terminology: -- - relative priority -- - minimum guaranteed bandwidth -- - maximum limit on bandwidth -- - limit on peak bandwidth -- - reserved buffer allocation -- - maximum limit on buffer allocation -- - filter/drop -- -- In addition, the following actions can also be thought of as a part of the -- treatment: -- - trap to policy server -- - outgoing IP TOS/mark/mask -- - outgoing 802.1p mark -- -- A set of parameters specify the scheduling characteristics of per-class -- queues and the marking of traffic that exits those queues. The term -- "flowspec" is used loosely here although it has many of the characteristics -- of an IntServ flowspec. -- -- ::= drop | -- -- ::= , -- -- ::= | | , , -- ::= peakBW, sustBW, bucketSize -- ::= minBW, maxPeakBW, maxSustBW -- ::= minBWpercent, maxSustBWpercent, maxPeakBWpercent -- ::= maxQueueLength, minBufferAlloc -- ::= relativePriority -- -- ::= , , -- ::= TRUE | FALSE -- ::= new_set_pattern, new_clear_pattern -- ::= INTEGER 0..7 | unchanged -- -- On any device using first-generation silicon, additional -- parameters are hard coded: -- -- mark_iptos = 0,0 (i.e. IPTOS unchanged) -- -- Note: for the ExtremeWare 4.0 release, some of the parameters are not -- exposed for modification through this interface: these are represented as -- read-only - 6.0 behaviour is currently undefined. -- -- In particular, hard-coded values for the following are used in 4.0: -- maxPeakBWpercent ::= line rate or 100% -- maxQueueLength ::= infinite or something approaching total buffers in -- the device -- minBufferAlloc ::= fixed at compile time -- mark_8021p ::= for packets entering untagged: 0, 2, 4 or 6 depending on -- queue number for packets entering tagged: unchanged. -- -- -- Existing table: -- -- extremeQosProfileTable INDEX { extremeQosProfileIndex} SEQUENCE OF -- { -- extremeQosProfileIndex INTEGER , -- extremeQosProfileName DisplayString, -- extremeQosProfileMinBw INTEGER (0..100), -- extremeQosProfileMaxBw INTEGER (0..100), -- extremeQosProfilePriority INTEGER {low, normal, medium, high} -- extremeQosProfileRowStatus RowStatus -- } -- -- Added the following "flowspec" columns to extremeQosProfileTable: -- -- extremeQosProfileMinBwBps INTEGER, -- extremeQosProfileMaxSustBwBps INTEGER, -- extremeQosProfileMaxPeakBwBps INTEGER, -- extremeQosProfileBucketSizeOctets INTEGER, -- extremeQosProfileMaxPeakBwPercent INTEGER (0..100), -- extremeQosProfileMaxQueueLengthOctets INTEGER, -- extremeQosProfileMinBufferAllocOctets INTEGER -- -- Added the following "action" columns to extremeQosProfileTable: -- -- extremeTrapToServer TruthValue, - send trap to policy server -- extremeMarkIpTosSet OCTET STRING (SIZE (1)), -- extremeMarkIpTosClear OCTET STRING (SIZE (1)), -- extremeMark8021p INTEGER (0..7) or unchanged(8) - see above -- =========================================================================== -- Capabilities -- =========================================================================== extremeQosCapabilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeQosCapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of per-port QoS policy capabilities. An entry only exists in this table for ifTable entries representing physical ports. On a modular system with mixed capability silicon it is necessary to indicate the QoS capabilities to a manager." ::= { extremeQosPolicy 3 } extremeQosCapabilitiesEntry OBJECT-TYPE SYNTAX ExtremeQosCapabilitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in table of QoS policy capabilities for a given switch port." AUGMENTS { ifEntry } ::= { extremeQosCapabilitiesTable 1 } ExtremeQosCapabilitiesEntry ::= SEQUENCE { extremeQosCapMarkIpTosCapable TruthValue, extremeQosCapMatchIpTosCapable TruthValue } extremeQosCapMarkIpTosCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This port is capable of supporting policies that involve the changing of IP TOS octet values." ::= { extremeQosCapabilitiesEntry 1 } extremeQosCapMatchIpTosCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This port is capable of supporting policies that involve packet classification based on matching of IP TOS octet values." ::= { extremeQosCapabilitiesEntry 2 } END -- =========================================================================== -- -- Extreme Dynamic-Link Context System (DLCS) reporting -- EXTREME-DLCS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, TimeTicks FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC DisplayString FROM RFC1213-MIB extremeAgent FROM EXTREME-BASE-MIB; extremeDlcs MODULE-IDENTITY LAST-UPDATED "9903040000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme Dynamic-Link Context System (DLCS) status objects" ::= { extremeAgent 8 } -- -- Enable/disable DLCS -- extremeDlcsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to true will allow the agent to start collecting DLCS binding information." ::= { extremeDlcs 1 } extremeDlcsNetbiosEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to true will allow the agent to start collecting DLCS binding information using the NetBios protocol." ::= { extremeDlcs 2 } extremeDlcsKerberos5Enable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to true will allow the agent to start collecting DLCS binding information using the Kerberos V5 protocol." ::= { extremeDlcs 3 } extremeDlcsRsvpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to true will allow the agent to start collecting DLCS binding information using the RSVP protocol." ::= { extremeDlcs 4 } extremeDlcsDnsEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this to true will allow the agent to start collecting DLCS binding information using the DNS protocol." ::= { extremeDlcs 5 } -- -- DLCS Binding Table -- -- -- How is this table used? -- -- (1) Manager creates extremeSmartTrapRulesEntry with -- extremeSmartTrapRulesIndex = XXXX -- extremeSmartTrapRulesDesiredOID = extremeDlcsBindingTable -- extremeSmartTrapRulesOperation = any -- -- (2) Events are reported by agent creating a extremeSmartTrapInstanceEntry with: -- -- extremeSmartTrapInstanceRule = XXXX -- extremeSmartTrapInstanceChangedOid = extremeDlcsBindingIndex -- extremeSmartTrapInstanceActualOperation = add, delete or modify -- -- and generating the actual trap. -- extremeDlcsBindingTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeDlcsBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of DLCS Binding information. Entries are added and deleted by the agent based on information gathered from the local network environment. Multiple entries may exist for almost identical sets of bindings although the agent will ensure that exactly matching entries are coalesced." ::= { extremeDlcs 6 } extremeDlcsBindingEntry OBJECT-TYPE SYNTAX ExtremeDlcsBindingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in table of DLCS bindings." INDEX { extremeDlcsBindingIndex } ::= { extremeDlcsBindingTable 1 } ExtremeDlcsBindingEntry ::= SEQUENCE { extremeDlcsBindingIndex INTEGER, extremeDlcsBindingType BITS, extremeDlcsBindingSource INTEGER, extremeDlcsBindingUser DisplayString, extremeDlcsBindingGroup DisplayString, extremeDlcsBindingApplication DisplayString, extremeDlcsBindingHost DisplayString, extremeDlcsBindingIpAddress IpAddress, extremeDlcsBindingPhysPort INTEGER, extremeDlcsBindingUpdateTime TimeTicks } extremeDlcsBindingIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "An index into this table, chosen by the agent. This has no significance to the manager beyond its uniqueness within this agent." ::= { extremeDlcsBindingEntry 1 } extremeDlcsBindingType OBJECT-TYPE SYNTAX BITS { user2ip(0), user2port(1), ip2port(2), application2user(3), application2ip(4), host2ip(5), group2ip(6), group2port(7), user2group(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of binding expressed here. A given bit is set if DLCS has detected that the two relevant items are bound together. e.g. an entry with application2user(3) set to 1 implies that the username extremeDlcsBindingUser has been seen to be using the application extremeDlcsBindingApplication. In addition, if this entry also has user2port(1) set to 1 then this user and application have been detected as running on the physical switch port extremeDlcsBindingPhysPort." ::= { extremeDlcsBindingEntry 2 } extremeDlcsBindingSource OBJECT-TYPE SYNTAX INTEGER { other (1), local(2), netbiosquery(3), netbiosbind (4), dns(5), kerberos5(6), rsvp(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The source of the information binding." ::= { extremeDlcsBindingEntry 3 } extremeDlcsBindingUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The User name detected by DLCS. A string of length zero indicates no valid User name has been detected for this binding." ::= { extremeDlcsBindingEntry 4 } extremeDlcsBindingGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Group name detected by DLCS. A string of length zero indicates no valid Group name has been detected for this binding." ::= { extremeDlcsBindingEntry 5 } extremeDlcsBindingApplication OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Application name detected by DLCS. A string of length zero indicates no valid Application name has been detected for this binding." ::= { extremeDlcsBindingEntry 6 } extremeDlcsBindingHost OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Host name detected by DLCS. A string of length zero indicates no valid Host name has been detected for this binding." ::= { extremeDlcsBindingEntry 7 } extremeDlcsBindingIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address detected by DLCS. A value of 0.0.0.0 indicates no valid IP address has been detected for this binding." ::= { extremeDlcsBindingEntry 8 } extremeDlcsBindingPhysPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The physical port number (ifIndex) detected by DLCS. This is valid in all bindings." ::= { extremeDlcsBindingEntry 9 } extremeDlcsBindingUpdateTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this entry was last updated." ::= { extremeDlcsBindingEntry 10 } END -- =========================================================================== EXTREME-FILETRANSFER-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, IpAddress, OBJECT-TYPE FROM SNMPv2-SMI DisplayString, TestAndIncr, RowStatus FROM SNMPv2-TC OwnerString FROM RMON-MIB extremeAgent FROM EXTREME-BASE-MIB; extremeFileTransfer MODULE-IDENTITY LAST-UPDATED "9810211630Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme File transfer objects" ::= {extremeAgent 10} -- The file transfer group extremeFileTransferGroup OBJECT IDENTIFIER ::= { extremeFileTransfer 1 } extremeFileTransferNextAvailableIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-only STATUS current DESCRIPTION "The index of the next free row in the extremeFileTransferTable." ::= { extremeFileTransferGroup 1} extremeFileTransferTable OBJECT-TYPE SYNTAX SEQUENCE OF FileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of pending and completed file transfers." ::= { extremeFileTransferGroup 2 } extremeFileTransferEntry OBJECT-TYPE SYNTAX FileTransferEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing information on a pending or completed file transfer." INDEX { extremeFileTransferIndex } ::= { extremeFileTransferTable 1 } FileTransferEntry ::= SEQUENCE { extremeFileTransferIndex INTEGER, extremeFileTransferServerAddress IpAddress, extremeFileTransferFileName DisplayString, extremeFileTransferOperation INTEGER, extremeFileTransferScheduledTime OCTET STRING, extremeFileTransferStartAdminStatus INTEGER, extremeFileTransferStartOperStatus INTEGER, extremeFileTransferLastExecutionStatus INTEGER, extremeFileTransferOwner OwnerString, extremeFileTransferRowStatus RowStatus } extremeFileTransferIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index into the file transfer table." ::= { extremeFileTransferEntry 1 } extremeFileTransferServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This is the address of the TFTP server from which to download the image or configuration or upload the configuration." ::= { extremeFileTransferEntry 2 } extremeFileTransferFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "This is the name of the file to be downloaded or uploaded." ::= { extremeFileTransferEntry 3 } extremeFileTransferOperation OBJECT-TYPE SYNTAX INTEGER { downloadImageToPrimaryImmediate(1), downloadImageToSecondaryImmediate(2), downloadConfigImmediate(3), uploadConfigImmediate(4), scheduleConfigUploadPeriodic(5), scheduleConfigUploadOnce(6), scheduleImageDownloadToPrimaryOnce(7), scheduleImageDownloadToSecondaryOnce(8), scheduleConfigDownloadOnce(9) } MAX-ACCESS read-create STATUS current DESCRIPTION "Indication of the file transfer operation. This object allows configuration of uploads and/or downloads either immediately or at a scheduled time. A value of downloadImageToPrimaryImmediate(1) or downloadImageToSecondaryImmediate(2) describes immediate download of a software image to either the primary or secondary permanent store. A value of downloadConfigImmediate(3) describes immediate download of a configuration file to non-volatile store. A value of uploadConfigImmediate(4) describes the immediate upload of the currently running configuration to the server. A value of scheduleConfigUploadOnce(6) describes a single upload of the current configuration to the server at the time extremeFileTransferScheduledTime. A value of scheduleConfigUploadPeriodic(5) describes daily uploads of the current configuration to the server at the time extremeFileTransferScheduledTime every day. A value of scheduleImageDownloadToPrimaryOnce(7) or scheduleImageDownloadToSecondaryOnce(8) describes a single download of a software image to either the primary or secondary permanent store at the time extremeFileTransferScheduledTime. This object can be modified only if extremeFileTransferStartOperStatus for this entry is idle(1). Note that any attempts to modify this object including row creation which would result in multiple downloads would cause the operation to fail. Managers are strongly recommened to examine the extremeFileTransferStartOperStatus object for the entries in the table to determine the status of downloads before attempting to modify this object." ::= { extremeFileTransferEntry 4 } extremeFileTransferScheduledTime OBJECT-TYPE -- This convention is from RMON2 SYNTAX OCTET STRING (SIZE (0 | 8 | 11)) MAX-ACCESS read-create STATUS current DESCRIPTION "The time of the day at which the file transfer operation should be initiated. This object is meaningful only for scheduled file transfers. field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11 10 11 minutes from UTC 0..59 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present, and if no time information is known, the null string is returned." ::= { extremeFileTransferEntry 5 } extremeFileTransferStartAdminStatus OBJECT-TYPE SYNTAX INTEGER { start(1), cancel(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Writing to this object initiates the upload/download or schedules one. The extremeFileTransferStartOperStatus object should be checked before attempting to set this object. This object cannot be modified while the extremeFileTransferStartOperStatus is inProgress(3). This object can be set start(1) only if the extremeFileTransferStartOperStatus is idle(1). A scheduled upload/download will be cancelled by setting the value of this object to cancel(2)." DEFVAL { cancel } ::= { extremeFileTransferEntry 6} extremeFileTransferStartOperStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), scheduled(2), inProgress(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The agent sets this value to reflect the current status of the file transfer operation. Reading this object is meaningful only if the extremeFileTransferRowStatus is active(1). The current status is determined by the agent by examining the values for extremeFileTransferOperation and extremeFileTransferStartAdminStatus." ::= { extremeFileTransferEntry 7 } extremeFileTransferLastExecutionStatus OBJECT-TYPE SYNTAX INTEGER { -- These values are from RMON-2 success(1), statusUnknown(2), generalError(3), noResponseFromServer(4), checksumError(5), incompatibleImage(6), tftpFileNotFound(7), tftpAccessViolation(8), fileTooLarge(9), downloadInProgress(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the last file transfer operation. This value is returned as statusUnknown(1) until the extremeFileTransferRowStatus is set to active(1) or when the extremeFileTransferStartOperStatus is inProgress(3). After an upload/download, the agent will update this value with the result of the file transfer. Managers should read this object before modifying extremeFileTransferOperation because the agent would set this value to statusUnknown(2) in such cases." ::= { extremeFileTransferEntry 8 } extremeFileTransferOwner OBJECT-TYPE SYNTAX OwnerString(SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the identity of the manager that configured this file transfer entry." ::= { extremeFileTransferEntry 9 } extremeFileTransferRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. This object can not be modified while the extremeFileTransferStatus is inProgress(1). Setting this object to notInService(2) or destroy(6) will cancel any scheduled uploads if this entry was configured for one. Note that any attempts to create new rows which would result in multiple downloads would cause the row creation to fail. Similarly, attempting to delete a row while extremeFileTransferStartOperStatus is inProgress(3) would fail. Managers are strongly recommened to examine the extremeFileTransferStartOperStatus object for the entries in the table to determine the status of downloads before attempting row creation/deletion." ::= { extremeFileTransferEntry 10 } END -- =========================================================================== EXTREME-RTSTATS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, TimeTicks, Counter32 FROM SNMPv2-SMI extremeAgent FROM EXTREME-BASE-MIB; extremeRtStats MODULE-IDENTITY LAST-UPDATED "9906240000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme real time stats related objects" ::= { extremeAgent 11 } extremeRtStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeRtStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of real time stats entries." ::= { extremeRtStats 1 } extremeRtStatsEntry OBJECT-TYPE SYNTAX ExtremeRtStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The last sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the RMON historyControlEntry which set up the parameters for a regular collection of these samples." INDEX { extremeRtStatsIndex } ::= { extremeRtStatsTable 1 } ExtremeRtStatsEntry ::= SEQUENCE { extremeRtStatsIndex INTEGER (1..65535), extremeRtStatsIntervalStart TimeTicks, extremeRtStatsCRCAlignErrors Counter32, extremeRtStatsUndersizePkts Counter32, extremeRtStatsOversizePkts Counter32, extremeRtStatsFragments Counter32, extremeRtStatsJabbers Counter32, extremeRtStatsCollisions Counter32, extremeRtStatsTotalErrors Counter32, extremeRtStatsUtilization INTEGER (0..10000) } extremeRtStatsIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex of the RMON historyControl table." ::= { extremeRtStatsEntry 1 } extremeRtStatsIntervalStart OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the start of the interval over which this sample was measured." ::= { extremeRtStatsEntry 2 } extremeRtStatsCRCAlignErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received during the last sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error)." ::= { extremeRtStatsEntry 3 } extremeRtStatsUndersizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received during the last sampling interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed." ::= { extremeRtStatsEntry 4 } extremeRtStatsOversizePkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received during the last sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed." ::= { extremeRtStatsEntry 5 } extremeRtStatsFragments OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received during the last sampling interval that were less than 64 octets in length (excluding framing bits but including FCS octets) had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error)." ::= { extremeRtStatsEntry 6 } extremeRtStatsJabbers OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received during the last sampling interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error)." ::= { extremeRtStatsEntry 7 } extremeRtStatsCollisions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the total number of collisions on this Ethernet segment during this sampling interval." ::= { extremeRtStatsEntry 8 } extremeRtStatsTotalErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of errors on this Ethernet segment during this sampling interval. This is the sum of the crc, fragments, jabbers and collisions counters over this sampling interval." ::= { extremeRtStatsEntry 9 } extremeRtStatsUtilization OBJECT-TYPE SYNTAX INTEGER (0..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent." ::= { extremeRtStatsEntry 10 } END -- ================================================================================== EXTREME-ESRP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC MacAddress FROM SNMPv2-TC OBJECT-TYPE FROM SNMPv2-SMI IpAddress FROM SNMPv2-SMI TruthValue FROM SNMPv2-TC ExtremeGenAddr FROM EXTREME-BASE-MIB extremeAgent FROM EXTREME-BASE-MIB; extremeEsrp MODULE-IDENTITY LAST-UPDATED "9910190000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme Standby Routing Protocol information" ::= { extremeAgent 12 } extremeEsrpTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeEsrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { extremeEsrp 2 } extremeEsrpEntry OBJECT-TYPE SYNTAX ExtremeEsrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {extremeEsrpVlanIfIndex, extremeEsrpGroup} ::= {extremeEsrpTable 1} ExtremeEsrpEntry ::= SEQUENCE { extremeEsrpVlanIfIndex INTEGER, extremeEsrpGroup INTEGER, extremeEsrpRowStatus RowStatus, extremeEsrpNetAddress ExtremeGenAddr, extremeEsrpState INTEGER, extremeEsrpPriority INTEGER, extremeEsrpElectionAlgorithm INTEGER, extremeEsrpHelloTimer INTEGER, extremeEsrpActivePorts INTEGER, extremeEsrpTrackedActivePorts INTEGER, extremeEsrpTrackedIpRoutes INTEGER } extremeEsrpVlanIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Any index to this table has a value that is the same as the ifIndex of one of the vlans present in the ifTable." ::= { extremeEsrpEntry 1 } extremeEsrpGroup OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates a gateway addresses this router backs up. Any gateway address can be backed up by a group of routers with one as the master and the others as backup. An instance of this object refers to one such group. Only the default group 1 is supported currently." ::= { extremeEsrpEntry 2 } extremeEsrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { extremeEsrpEntry 3 } extremeEsrpNetAddress OBJECT-TYPE SYNTAX ExtremeGenAddr MAX-ACCESS read-only STATUS current DESCRIPTION "The IP/IPX address of this vlan. This entry is null if no address has been assigned to the vlan." ::= { extremeEsrpEntry 4 } extremeEsrpState OBJECT-TYPE SYNTAX INTEGER { neutral(1), master(2), slave(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { extremeEsrpEntry 5 } extremeEsrpPriority OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority which would be advertised by this router for determining the esrp master." ::= { extremeEsrpEntry 6 } extremeEsrpElectionAlgorithm OBJECT-TYPE SYNTAX INTEGER { ports-track-priority-mac(1), track-ports-priority-mac(2), priority-ports-track-mac(3), priority-track-ports-mac(4), priority-mac-only(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The algorithm to use in selecting the esrp master." ::= { extremeEsrpEntry 7 } extremeEsrpHelloTimer OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval for exchanging hello messages." ::= { extremeEsrpEntry 8 } extremeEsrpActivePorts OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of physical ports that are in this vlan." ::= { extremeEsrpEntry 9 } extremeEsrpTrackedActivePorts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ports belonging to the vlans that are tracked by this esrp router." ::= { extremeEsrpEntry 10 } extremeEsrpTrackedIpRoutes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ip routes that are tracked by this esrp router." ::= { extremeEsrpEntry 11 } extremeEsrpNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeEsrpNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { extremeEsrp 3 } extremeEsrpNeighborEntry OBJECT-TYPE SYNTAX ExtremeEsrpNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {extremeEsrpVlanIfIndex, extremeEsrpGroup, extremeEsrpNeighborMacAddress} ::= {extremeEsrpNeighborTable 1} ExtremeEsrpNeighborEntry ::= SEQUENCE { extremeEsrpNeighborMacAddress MacAddress, extremeEsrpNeighborGroup INTEGER, extremeEsrpNeighborNetAddress ExtremeGenAddr, extremeEsrpNeighborState INTEGER, extremeEsrpNeighborPriority INTEGER, extremeEsrpNeighborElectionAlgorithm INTEGER, extremeEsrpNeighborHelloTimer INTEGER, extremeEsrpNeighborActivePorts INTEGER, extremeEsrpNeighborTrackedActivePorts INTEGER, extremeEsrpNeighborTrackedIpRoutes INTEGER } extremeEsrpNeighborMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Mac address of other esrp routers that backup this gateway address." ::= { extremeEsrpNeighborEntry 1 } extremeEsrpNeighborGroup OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates a gateway addresses this router backs up. Any gateway address can be backed up by a group of routers with one as the master and the others as backup. An instance of this object refers to one such group. Note that this object is defined in addition to extremeEsrpGroup. Whereas the extremeEsrpGroup refers to the group information advertised by this host the extremeEsrpNeighborGroup refers to the group information reported by the neighbor. There might be a conflict. Only the default group 1 is supported currently." ::= { extremeEsrpNeighborEntry 2 } extremeEsrpNeighborNetAddress OBJECT-TYPE SYNTAX ExtremeGenAddr MAX-ACCESS read-only STATUS current DESCRIPTION "The network layer address of this router. This may be null if no address was assigned." ::= { extremeEsrpNeighborEntry 3 } extremeEsrpNeighborState OBJECT-TYPE SYNTAX INTEGER { neutral(1), master(2), slave(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of the esrp neighbor." ::= { extremeEsrpNeighborEntry 4 } extremeEsrpNeighborPriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The priority reported by this esrp neighbor." ::= { extremeEsrpNeighborEntry 5 } extremeEsrpNeighborElectionAlgorithm OBJECT-TYPE SYNTAX INTEGER { portAndPriority(1), priority(2), priorityThenPort(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The algorithm to use in selecting the esrp master reported by this esrp neighbor." ::= { extremeEsrpNeighborEntry 6 } extremeEsrpNeighborHelloTimer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval for exchanging hello messages configured at this esrp neighbor." ::= { extremeEsrpNeighborEntry 7 } extremeEsrpNeighborActivePorts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of physical ports that are in present in the neighbor's vlan." ::= { extremeEsrpNeighborEntry 8 } extremeEsrpNeighborTrackedActivePorts OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ports belonging to the vlans that are tracked by this esrp neighbor." ::= { extremeEsrpNeighborEntry 9 } extremeEsrpNeighborTrackedIpRoutes OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ip routes that are tracked by this esrp neighbor." ::= { extremeEsrpNeighborEntry 10 } extremeEsrpTrackVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeEsrpTrackVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { extremeEsrp 4 } extremeEsrpTrackVlanEntry OBJECT-TYPE SYNTAX ExtremeEsrpTrackVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {extremeEsrpVlanIfIndex, extremeEsrpGroup, extremeEsrpTrackVlanIfIndex} ::= {extremeEsrpTrackVlanTable 1} ExtremeEsrpTrackVlanEntry ::= SEQUENCE { extremeEsrpTrackVlanIfIndex INTEGER, extremeEsrpTrackVlanRowStatus RowStatus } extremeEsrpTrackVlanIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the tracked vlan." ::= { extremeEsrpTrackVlanEntry 1 } extremeEsrpTrackVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { extremeEsrpTrackVlanEntry 2 } extremeEsrpTrackIpRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeEsrpTrackIpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { extremeEsrp 5 } extremeEsrpTrackIpRouteEntry OBJECT-TYPE SYNTAX ExtremeEsrpTrackIpRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {extremeEsrpVlanIfIndex, extremeEsrpGroup, extremeEsrpTrackIpRouteIpAddress, extremeEsrpTrackIpRouteNetMask} ::= {extremeEsrpTrackIpRouteTable 1} ExtremeEsrpTrackIpRouteEntry ::= SEQUENCE { extremeEsrpTrackIpRouteIpAddress IpAddress, extremeEsrpTrackIpRouteNetMask IpAddress, extremeEsrpTrackIpRouteRowStatus RowStatus } extremeEsrpTrackIpRouteIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the tracked vlan." ::= { extremeEsrpTrackIpRouteEntry 1 } extremeEsrpTrackIpRouteNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the tracked vlan." ::= { extremeEsrpTrackIpRouteEntry 2 } extremeEsrpTrackIpRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { extremeEsrpTrackIpRouteEntry 3 } extremeEsrpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeEsrpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { extremeEsrp 6 } extremeEsrpPortEntry OBJECT-TYPE SYNTAX ExtremeEsrpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {extremeEsrpVlanIfIndex, extremeEsrpPortIfIndex} ::= {extremeEsrpPortTable 1} ExtremeEsrpPortEntry ::= SEQUENCE { extremeEsrpPortIfIndex INTEGER, extremeEsrpPortState TruthValue } extremeEsrpPortIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the physical port that is part of the vlan specified by the extremeEsrpVlanIfIndex." ::= { extremeEsrpPortEntry 1 } extremeEsrpPortState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if esrp is enabled or disabled on this port." ::= { extremeEsrpPortEntry 2 } END -- =========================================================================== EXTREME-EDP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-TYPE FROM SNMPv2-SMI IpAddress FROM SNMPv2-SMI ifIndex FROM RFC1213-MIB DisplayString FROM RFC1213-MIB TruthValue FROM SNMPv2-TC ExtremeDeviceId FROM EXTREME-BASE-MIB extremeAgent FROM EXTREME-BASE-MIB; extremeEdp MODULE-IDENTITY LAST-UPDATED "9910200000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme Discovery Protocol information" ::= { extremeAgent 13 } extremeEdpTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeEdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { extremeEdp 2 } extremeEdpEntry OBJECT-TYPE SYNTAX ExtremeEdpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {extremeEdpPortIfIndex, extremeEdpNeighborId} ::= {extremeEdpTable 1} ExtremeEdpEntry ::= SEQUENCE { extremeEdpPortIfIndex INTEGER, extremeEdpNeighborId ExtremeDeviceId, extremeEdpNeighborName DisplayString, extremeEdpNeighborSoftwareVersion DisplayString, extremeEdpNeighborSlot INTEGER, extremeEdpNeighborPort INTEGER, extremeEdpEntryAge INTEGER } extremeEdpPortIfIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex of the physical port on which this entry was discovered via edp." ::= { extremeEdpEntry 1 } extremeEdpNeighborId OBJECT-TYPE SYNTAX ExtremeDeviceId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The identifier associated with the neighbor." ::= { extremeEdpEntry 2 } extremeEdpNeighborName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier associated with the neighbor." ::= { extremeEdpEntry 3 } extremeEdpNeighborSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The identifier associated with the neighbor." ::= { extremeEdpEntry 4 } extremeEdpNeighborSlot OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The slot on which this neighbor received the edp message." ::= { extremeEdpEntry 5 } extremeEdpNeighborPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The port on which this neighbor received the edp message." ::= { extremeEdpEntry 6 } extremeEdpEntryAge OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The time in seconds since this entry was last updated." ::= { extremeEdpEntry 7 } extremeEdpNeighborTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeEdpNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { extremeEdp 3 } extremeEdpNeighborEntry OBJECT-TYPE SYNTAX ExtremeEdpNeighborEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {extremeEdpPortIfIndex, extremeEdpNeighborId, extremeEdpNeighborVlanName} ::= {extremeEdpNeighborTable 1} ExtremeEdpNeighborEntry ::= SEQUENCE { extremeEdpNeighborVlanName DisplayString, extremeEdpNeighborVlanId INTEGER, extremeEdpNeighborVlanIpAddress IpAddress } extremeEdpNeighborVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the vlan configured on and reported by this edp neighbor." ::= { extremeEdpNeighborEntry 1 } extremeEdpNeighborVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan identifier associated with this vlan configured on this neighbor." ::= { extremeEdpNeighborEntry 2 } extremeEdpNeighborVlanIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The ip address of the reported vlan." ::= { extremeEdpNeighborEntry 3 } extremeEdpPortTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeEdpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { extremeEdp 4 } extremeEdpPortEntry OBJECT-TYPE SYNTAX ExtremeEdpPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX {ifIndex} ::= {extremeEdpPortTable 1} ExtremeEdpPortEntry ::= SEQUENCE { extremeEdpPortState TruthValue } extremeEdpPortState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if edp is enabled or disabled on this port." ::= { extremeEdpPortEntry 1 } END -- =========================================================================== -- ============================================================================ -- -- Extreme Traps -- EXTREME-TRAP-MIB DEFINITIONS ::= BEGIN IMPORTS extremenetworks FROM EXTREME-BASE-MIB extremeSlotNumber FROM EXTREME-SYSTEM-MIB extremeSlotModuleConfiguredType FROM EXTREME-SYSTEM-MIB extremeSlotModuleInsertedType FROM EXTREME-SYSTEM-MIB extremeSlotModuleState FROM EXTREME-SYSTEM-MIB extremeEsrpGroup, extremeEsrpState, extremeEsrpNetAddress FROM EXTREME-ESRP-MIB extremeEsrpActivePorts, extremeEsrpActivePorts FROM EXTREME-ESRP-MIB extremeEsrpTrackedActivePorts, extremeEsrpTrackedIpRoutes FROM EXTREME-ESRP-MIB extremeVlanIfIndex, extremeVlanIfDescr FROM EXTREME-VLAN-MIB sysUpTime, sysDescr, ifPhysAddress FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215; overheat TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, sysDescr } DESCRIPTION "A overheat trap indicates that the on board tempature sensor has reported a overheat condition. System will shutdown until unit has suficiently cooled such that operation may begin again. A cold start trap will be issued when the unit has come back on line." ::= 6 fanfailed TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, sysDescr } DESCRIPTION "A fan failed trap indicates one or more of the cooling fans inside the device has failed. A fanOK trap will be sent once the fan has attained normal operation." ::= 7 fanOK TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, sysDescr } DESCRIPTION "A fan has transitioned out of a failure state and is now operating correctly." ::= 8 invalidLoginAttempt TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, sysDescr } DESCRIPTION "A user attempted to login to console or by telnet but was refused access due to incorrect username or password" ::= 9 powerSupplyFail TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, sysDescr } DESCRIPTION "One or more sources of power to this agent has failed. Presumably a redundant power-supply has taken over." ::= 10 powerSupplyGood TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, sysDescr } DESCRIPTION "One or more previously bad sources of power to this agent has come back to life without causing an agent restart." ::= 11 rpsAlarm TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, sysDescr } DESCRIPTION "Attached Redundant Power Supply device is indicating an alarm condition." ::= 12 rpsNoAlarm TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, sysDescr } DESCRIPTION "Attached Redundant Power Supply device is no longer indicating an alarm condition." ::= 13 -- -- SmartTrap definition -- extremeSmartTrap TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, sysDescr } DESCRIPTION "Signifies that the value of one of the object identifiers (or the value of an object below that in the MIB tree) defined in the extremeSmartTrapRulesTable has changed, and hence a new entry has been created in the extremeSmartTrapInstanceTable. Such a trap is sent at most once every thirty seconds if one or more entry was created in the last thirty seconds." ::= 14 -- -- Traps for Black Diamond -- extremeModuleStateChanged TRAP-TYPE ENTERPRISE extremenetworks VARIABLES { sysUpTime, extremeSlotNumber, extremeSlotModuleConfiguredType, extremeSlotModuleInsertedType, extremeSlotModuleState } DESCRIPTION "Signifies that the value of the extremeSlotModuleState for the specified extremeSlotNumber has changed." ::= 15 -- extremeModuleOverheat TRAP-TYPE -- ENTERPRISE extremenetworks -- VARIABLES {sysUpTime, extremeSlotNumber } -- DESCRIPTION -- "Signifies that the temperature sensor on the module -- inside this slot has reported an Overheat condition." -- ::= 16 esrpStateChange TRAP-TYPE ENTERPRISE extremenetworks VARIABLES {sysUpTime, sysDescr, extremeVlanIfIndex, extremeVlanIfDescr, extremeEsrpGroup, extremeEsrpState, extremeEsrpNetAddress, ifPhysAddress, extremeEsrpActivePorts, extremeEsrpTrackedActivePorts, extremeEsrpTrackedIpRoutes } DESCRIPTION "Signifies Esrp state change" ::= 17 END