| Netra 240 Server Service Manual |     |
| Netra 240 Server Service Manual | |
Netra 240 Server Service Manual
817-2699-12
|
Contents |
1. Identifying the Netra 240 Server Components and LEDs
Identifying the Netra 240 Server Components
Identifying the Netra 240 Server LED Indicators
2. Preparing to Service the System
Powering On the Server Remotely
Powering Off the Server Remotely
Powering Off the System From the ok Prompt
Powering Off the System From the ALOM System Controller Prompt
Initiating a Reconfiguration Boot
Accessing Rotating Service Module Components
Opening the Rotating Service Module
Closing the Rotating Service Module
Avoiding Electrostatic Discharge
3. Removing and Replacing Front and Rear Panel Components
Removing a System Configuration Card
Inserting a System Configuration Card
Installing a Power Supply Unit
4. Removing and Replacing Rotating Service Module Components
Removing the Front Fan Assembly Tray
Installing the Front Fan Assembly Tray
Removing the SCSI Interface Board
Installing the SCSI Interface Board
System Configuration Card Reader Cluster
Removing the System Configuration Card Reader Cluster
Installing the System Configuration Card Reader Cluster
5. Removing and Replacing Miscellaneous Internal Components
Air Duct and Rear Fan Assembly
Removing or Rotating the Air Duct and Rear Fan Assembly
Installing or Closing the Air Duct and Rear Fan Assembly
Removing the Power Distribution Board
Installing the Power Distribution Board
Removing the Hardware Cryptographic Module
Installing the Hardware Cryptographic Module
6. System Board Jumper Settings
A. Illustrated Parts Breakdown
Rotating Service Module, Internal and Rear Panel Components
Miscellaneous Internal Components
RJ-45 to DB-9 Adapter Crossovers
RJ-45 to DB-25 Adapter Crossovers
C. System Configuration Card and OpenBoot Configuration Parameters
NEBS Level 3 Compliance for the DC-Powered Server
| Netra 240 Server Service Manual | 817-2699-12 | |
Copyright © 2004, Sun Microsystems, Inc. All rights reserved.