When run under GNU Emacs mode, the info line command now causes the arrow to point to the line specified. Also, info line prints addresses in symbolic form as well as hex.
 

info linelinespec
Print the starting and ending addresses of the compiled code for source line linespec. Specify source lines in any of the ways understood by the list command (see Printing source lines).
For instance, we can use info line to discover the location of the object code for the first line of function, m4_changequote, as in the following example.
 
(gdb) info line m4_changecom
Line 895 of "builtin.c" starts at pc 0x634c and ends at 0x6350.
We can also inquire (using *addras, the form for linespec) what source line covers a particular address, as in the following example.
 
(gdb) info line *0x63ff
Line 926 of "builtin.c" starts at pc 0x63e4 and ends at 0x6404.
After info line, the default address for the x command is changed to the starting address of the line, so that ‘x/i’ is sufficient to begin examining the machine code (see Examining memory). Also, this address is saved as the value of the convenience variable, $_ (see Convenience variables).
disassemble
This specialized command dumps a range of memory as machine instructions. The default memory range is the function surrounding the program counter of the selected frame. A single argument to this command is a program counter value; GDB dumps the function surrounding this value. Two arguments specify a range of addresses (first inclusive, second exclusive) to dump.
We can use disassemble to inspect the object code range shown in the last info line example (the example shows SPARC machine instructions):
 
(gdb) disas 0x63e4 0x6404
Dump of assembler code from 0x63e4 to 0x6404:
0x63e4 <builtin_init+5340>: ble 0x63f8 <builtin_init+5360>
0x63e8 <builtin_init+5344>: sethi %hi(0x4c00), %o0
0x63ec <builtin_init+5348>: ld [%i1+4], %o0
0x63f0 <builtin_init+5352>: 0x63fc <builtin_init+5364>
0x63f4 <builtin_init+5356>: ld [%o0+4], %o0
0x63f8 <builtin_init+5360>: or %o0, 0x1a4, %o0
0x63fc <builtin_init+5364>: call 0x9288 <path_search>
0x6400 <builtin_init+5368>: nop
End of assembler dump.


set assembly-language instruction-set

This command selects the instruction set to use when disassembling
the program via the disassemble or x/i com-mands. It is useful for architectures that have more than one native instruction set. Currently, it is only defined for the Intel x86 family. You can set instruction-set to either i386 or i8086. The default is i386.