The Open Group Base Specifications Issue 6
IEEE Std 1003.1, 2003 Edition
Copyright © 2001-2003 The IEEE and The Open Group, All Rights reserved.

Introduction

Scope

The scope of IEEE Std 1003.1-2001 is described in the Base Definitions volume of IEEE Std 1003.1-2001.

Conformance

Conformance requirements for IEEE Std 1003.1-2001 are defined in the Base Definitions volume of IEEE Std 1003.1-2001, Chapter 2, Conformance.

Normative References

Normative references for IEEE Std 1003.1-2001 are defined in the Base Definitions volume of IEEE Std 1003.1-2001.

Change History

Change history is described in the Rationale (Informative) volume of IEEE Std 1003.1-2001, and in the CHANGE HISTORY section of reference pages.

Terminology

This section appears in the Base Definitions volume of IEEE Std 1003.1-2001, but is repeated here for convenience:

For the purposes of IEEE Std 1003.1-2001, the following terminology definitions apply:

can

Describes a permissible optional feature or behavior available to the user or application. The feature or behavior is mandatory for an implementation that conforms to IEEE Std 1003.1-2001. An application can rely on the existence of the feature or behavior.

implementation-defined

Describes a value or behavior that is not defined by IEEE Std 1003.1-2001 but is selected by an implementor. The value or behavior may vary among implementations that conform to IEEE Std 1003.1-2001. An application should not rely on the existence of the value or behavior. An application that relies on such a value or behavior cannot be assured to be portable across conforming implementations.

The implementor shall document such a value or behavior so that it can be used correctly by an application.

legacy

Describes a feature or behavior that is being retained for compatibility with older applications, but which has limitations which make it inappropriate for developing portable applications. New applications should use alternative means of obtaining equivalent functionality.

may

Describes a feature or behavior that is optional for an implementation that conforms to IEEE Std 1003.1-2001. An application should not rely on the existence of the feature or behavior. An application that relies on such a feature or behavior cannot be assured to be portable across conforming implementations.

To avoid ambiguity, the opposite of may is expressed as need not, instead of may not.

shall

For an implementation that conforms to IEEE Std 1003.1-2001, describes a feature or behavior that is mandatory. An application can rely on the existence of the feature or behavior.

For an application or user, describes a behavior that is mandatory.

should

For an implementation that conforms to IEEE Std 1003.1-2001, describes a feature or behavior that is recommended but not mandatory. An application should not rely on the existence of the feature or behavior. An application that relies on such a feature or behavior cannot be assured to be portable across conforming implementations.

For an application, describes a feature or behavior that is recommended programming practice for optimum portability.

undefined

Describes the nature of a value or behavior not defined by IEEE Std 1003.1-2001 which results from use of an invalid program construct or invalid data input.

The value or behavior may vary among implementations that conform to IEEE Std 1003.1-2001. An application should not rely on the existence or validity of the value or behavior. An application that relies on any particular value or behavior cannot be assured to be portable across conforming implementations.

unspecified

Describes the nature of a value or behavior not specified by IEEE Std 1003.1-2001 which results from use of a valid program construct or valid data input.

The value or behavior may vary among implementations that conform to IEEE Std 1003.1-2001. An application should not rely on the existence or validity of the value or behavior. An application that relies on any particular value or behavior cannot be assured to be portable across conforming implementations.

Definitions

Concepts and definitions are defined in the Base Definitions volume of IEEE Std 1003.1-2001.

Relationship to Other Formal Standards

Great care has been taken to ensure that this volume of IEEE Std 1003.1-2001 is fully aligned with the following standards:

ISO C (1999)

ISO/IEC 9899:1999, Programming Languages - C.

Parts of the ISO/IEC 9899:1999 standard (hereinafter referred to as the ISO C standard) are referenced to describe requirements also mandated by this volume of IEEE Std 1003.1-2001. Some functions and headers included within this volume of IEEE Std 1003.1-2001 have a version in the ISO C standard; in this case CX markings are added as appropriate to show where the ISO C standard has been extended (see Codes ). Any conflict between this volume of IEEE Std 1003.1-2001 and the ISO C standard is unintentional.

This volume of IEEE Std 1003.1-2001 also allows, but does not require, mathematics functions to support IEEE Std 754-1985 and IEEE Std 854-1987.

Portability

Some of the utilities in the Shell and Utilities volume of IEEE Std 1003.1-2001 and functions in the System Interfaces volume of IEEE Std 1003.1-2001 describe functionality that might not be fully portable to systems meeting the requirements for POSIX conformance (see the Base Definitions volume of IEEE Std 1003.1-2001, Chapter 2, Conformance).

Where optional, enhanced, or reduced functionality is specified, the text is shaded and a code in the margin identifies the nature of the option, extension, or warning (see Codes ). For maximum portability, an application should avoid such functionality.

Codes

Margin codes and their meanings are listed in the Base Definitions volume of IEEE Std 1003.1-2001, but are repeated here for convenience:

[ADV] [Option Start] Advisory Information [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the ADV margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the ADV margin legend.

[AIO] [Option Start] Asynchronous Input and Output [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the AIO margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the AIO margin legend.

[BAR] [Option Start] Barriers [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the BAR margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the BAR margin legend.

[BE] [Option Start] Batch Environment Services and Utilities [Option End]
The functionality described is optional.

Where applicable, utilities are marked with the BE margin legend in the SYNOPSIS section. Where additional semantics apply to a utility, the material is identified by use of the BE margin legend.

[CD] [Option Start] C-Language Development Utilities [Option End]
The functionality described is optional.

Where applicable, utilities are marked with the CD margin legend in the SYNOPSIS section. Where additional semantics apply to a utility, the material is identified by use of the CD margin legend.

[CPT] [Option Start] Process CPU-Time Clocks [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the CPT margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the CPT margin legend.

[CS] [Option Start] Clock Selection [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the CS margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the CS margin legend.

[CX] [Option Start] Extension to the ISO C standard [Option End]
The functionality described is an extension to the ISO C standard. Application writers may make use of an extension as it is supported on all IEEE Std 1003.1-2001-conforming systems.

With each function or header from the ISO C standard, a statement to the effect that "any conflict is unintentional" is included. That is intended to refer to a direct conflict. IEEE Std 1003.1-2001 acts in part as a profile of the ISO C standard, and it may choose to further constrain behaviors allowed to vary by the ISO C standard. Such limitations are not considered conflicts.

Where additional semantics apply to a function or header, the material is identified by use of the CX margin legend.

[FD] [Option Start] FORTRAN Development Utilities [Option End]
The functionality described is optional.

Where applicable, utilities are marked with the FD margin legend in the SYNOPSIS section. Where additional semantics apply to a utility, the material is identified by use of the FD margin legend.

[FR] [Option Start] FORTRAN Runtime Utilities [Option End]
The functionality described is optional.

Where applicable, utilities are marked with the FR margin legend in the SYNOPSIS section. Where additional semantics apply to a utility, the material is identified by use of the FR margin legend.

[FSC] [Option Start] File Synchronization [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the FSC margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the FSC margin legend.

[IP6] [Option Start] IPV6 [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the IP6 margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the IP6 margin legend.

[MC1] [Option Start] Advisory Information and either Memory Mapped Files or Shared Memory Objects [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

This is a shorthand notation for combinations of multiple option codes.

Where applicable, functions are marked with the MC1 margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the MC1 margin legend.

Refer to the Base Definitions volume of IEEE Std 1003.1-2001, Section 1.5.2, Margin Code Notation.

[MC2] [Option Start] Memory Mapped Files, Shared Memory Objects, or Memory Protection [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

This is a shorthand notation for combinations of multiple option codes.

Where applicable, functions are marked with the MC2 margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the MC2 margin legend.

Refer to the Base Definitions volume of IEEE Std 1003.1-2001, Section 1.5.2, Margin Code Notation.

[MC3] [Option Start] Memory Mapped Files, Shared Memory Objects, or Typed Memory Objects [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

This is a shorthand notation for combinations of multiple option codes.

Where applicable, functions are marked with the MC3 margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the MC3 margin legend.

Refer to the Base Definitions volume of IEEE Std 1003.1-2001, Section 1.5.2, Margin Code Notation.

[MF] [Option Start] Memory Mapped Files [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the MF margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the MF margin legend.

[ML] [Option Start] Process Memory Locking [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the ML margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the ML margin legend.

[MR] [Option Start] Range Memory Locking [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the MLR margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the MLR margin legend.

[MON] [Option Start] Monotonic Clock [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the MON margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the MON margin legend.

[MPR] [Option Start] Memory Protection [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the MPR margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the MPR margin legend.

[MSG] [Option Start] Message Passing [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the MSG margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the MSG margin legend.

[MX] [Option Start] IEC 60559 Floating-Point Option [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the MX margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the MX margin legend.

[OB] [Option Start] Obsolescent [Option End]
The functionality described may be withdrawn in a future version of this volume of IEEE Std 1003.1-2001. Strictly Conforming POSIX Applications and Strictly Conforming XSI Applications shall not use obsolescent features.

Where applicable, the material is identified by use of the OB margin legend.

[OF] [Option Start] Output Format Incompletely Specified [Option End]
The functionality described is an XSI extension. The format of the output produced by the utility is not fully specified. It is therefore not possible to post-process this output in a consistent fashion. Typical problems include unknown length of strings and unspecified field delimiters.

Where applicable, the material is identified by use of the OF margin legend.

[OH] [Option Start] Optional Header [Option End]
In the SYNOPSIS section of some interfaces in the System Interfaces volume of IEEE Std 1003.1-2001 an included header is marked as in the following example:

[OH][Option Start]
#include <sys/types.h>
[Option End]
#include <grp.h>
struct group *getgrnam(const char *name);

The OH margin legend indicates that the marked header is not required on XSI-conformant systems.

[PIO] [Option Start] Prioritized Input and Output [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the PIO margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the PIO margin legend.

[PS] [Option Start] Process Scheduling [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the PS margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the PS margin legend.

[RS] [Option Start] Raw Sockets [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the RS margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the RS margin legend.

[RTS] [Option Start] Realtime Signals Extension [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the RTS margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the RTS margin legend.

[SD] [Option Start] Software Development Utilities [Option End]
The functionality described is optional.

Where applicable, utilities are marked with the SD margin legend in the SYNOPSIS section. Where additional semantics apply to a utility, the material is identified by use of the SD margin legend.

[SEM] [Option Start] Semaphores [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the SEM margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the SEM margin legend.

[SHM] [Option Start] Shared Memory Objects [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the SHM margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the SHM margin legend.

[SIO] [Option Start] Synchronized Input and Output [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the SIO margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the SIO margin legend.

[SPI] [Option Start] Spin Locks [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the SPI margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the SPI margin legend.

[SPN] [Option Start] Spawn [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the SPN margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the SPN margin legend.

[SS] [Option Start] Process Sporadic Server [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the SS margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the SS margin legend.

[TCT] [Option Start] Thread CPU-Time Clocks [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TCT margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TCT margin legend.

[TEF] [Option Start] Trace Event Filter [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TEF margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TEF margin legend.

[THR] [Option Start] Threads [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the THR margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the THR margin legend.

[TMO] [Option Start] Timeouts [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TMO margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TMO margin legend.

[TMR] [Option Start] Timers [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TMR margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TMR margin legend.

[TPI] [Option Start] Thread Priority Inheritance [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TPI margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TPI margin legend.

[TPP] [Option Start] Thread Priority Protection [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TPP margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TPP margin legend.

[TPS] [Option Start] Thread Execution Scheduling [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TPS margin legend for the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TPS margin legend.

[TRC] [Option Start] Trace [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TRC margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TRC margin legend.

[TRI] [Option Start] Trace Inherit [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TRI margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TRI margin legend.

[TRL] [Option Start] Trace Log [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TRL margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TRL margin legend.

[TSA] [Option Start] Thread Stack Address Attribute [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TSA margin legend for the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TSA margin legend.

[TSF] [Option Start] Thread-Safe Functions [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TSF margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TSF margin legend.

[TSH] [Option Start] Thread Process-Shared Synchronization [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TSH margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TSH margin legend.

[TSP] [Option Start] Thread Sporadic Server [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TSP margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TSP margin legend.

[TSS] [Option Start] Thread Stack Size Attribute [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TSS margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TSS margin legend.

[TYM] [Option Start] Typed Memory Objects [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the TYM margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the TYM margin legend.

[UP] [Option Start] User Portability Utilities [Option End]
The functionality described is optional.

Where applicable, utilities are marked with the UP margin legend in the SYNOPSIS section. Where additional semantics apply to a utility, the material is identified by use of the UP margin legend.

[XSI] [Option Start] Extension [Option End]
The functionality described is an XSI extension. Functionality marked XSI is also an extension to the ISO C standard. Application writers may confidently make use of an extension on all systems supporting the X/Open System Interfaces Extension.

If an entire SYNOPSIS section is shaded and marked XSI, all the functionality described in that reference page is an extension. See the Base Definitions volume of IEEE Std 1003.1-2001, Section 3.439, XSI.

[XSR] [Option Start] XSI STREAMS [Option End]
The functionality described is optional. The functionality described is also an extension to the ISO C standard.

Where applicable, functions are marked with the XSR margin legend in the SYNOPSIS section. Where additional semantics apply to a function, the material is identified by use of the XSR margin legend.

Format of Entries

The entries in System Interfaces are based on a common format as follows. The only sections relating to conformance are the SYNOPSIS, DESCRIPTION, RETURN VALUE, and ERRORS sections.

NAME

This section gives the name or names of the entry and briefly states its purpose.
SYNOPSIS

This section summarizes the use of the entry being described. If it is necessary to include a header to use this function, the names of such headers are shown, for example:
#include <stdio.h>

DESCRIPTION

This section describes the functionality of the function or header.
RETURN VALUE

This section indicates the possible return values, if any.

If the implementation can detect errors, "successful completion" means that no error has been detected during execution of the function. If the implementation does detect an error, the error is indicated.

For functions where no errors are defined, "successful completion" means that if the implementation checks for errors, no error has been detected. If the implementation can detect errors, and an error is detected, the indicated return value is returned and errno may be set.

ERRORS

This section gives the symbolic names of the error values returned by a function or stored into a variable accessed through the symbol errno if an error occurs.

``No errors are defined" means that error values returned by a function or stored into a variable accessed through the symbol errno, if any, depend on the implementation.

EXAMPLES

This section is informative.

This section gives examples of usage, where appropriate. In the event of conflict between an example and a normative part of this volume of IEEE Std 1003.1-2001, the normative material is to be taken as correct.

APPLICATION USAGE

This section is informative.

This section gives warnings and advice to application writers about the entry. In the event of conflict between warnings and advice and a normative part of this volume of IEEE Std 1003.1-2001, the normative material is to be taken as correct.

RATIONALE

This section is informative.

This section contains historical information concerning the contents of this volume of IEEE Std 1003.1-2001 and why features were included or discarded by the standard developers.

FUTURE DIRECTIONS

This section is informative.

This section provides comments which should be used as a guide to current thinking; there is not necessarily a commitment to adopt these future directions.

SEE ALSO

This section is informative.

This section gives references to related information.

CHANGE HISTORY

This section is informative.

This section shows the derivation of the entry and any significant changes that have been made to it.


UNIX ® is a registered Trademark of The Open Group.
POSIX ® is a registered Trademark of The IEEE.
[ Main Index | XBD | XCU | XSH | XRAT ]