2 Creating an Oracle Database

Considerations Before Creating the Database

Database creation prepares several operating system files to work together as an Oracle Database. You need only create a database once, regardless of how many datafiles it has or how many instances access it. You can create a database to erase information in an existing database and create a new database with the same name and physical structure.

The following topics can help prepare you for database creation.

• Planning for Database Creation

• Meeting Creation Prerequisites

Creating the Database

This section presents the steps involved when you create a database manually. These steps should be followed in the order presented. The prerequisites described in the preceding section must already have been completed. That is, you have established the environment for creating your Oracle Database, including most operating system dependent environmental variables, as part of the Oracle software installation process.

Step 1: Decide on Your Instance Identifier (SID)

Step 2: Establish the Database Administrator Authentication Method

Step 3: Create the Initialization Parameter File

Step 4: Connect to the Instance

Step 5: Create a Server Parameter File (Recommended)

Step 6: Start the Instance

Step 7: Issue the CREATE DATABASE Statement

Step 8: Create Additional Tablespaces

Step 9: Run Scripts to Build Data Dictionary Views

Step 10: Run Scripts to Install Additional Options (Optional)

Step 11: Back Up the Database.

The examples shown in these steps create an example database mynewdb.

% setenv ORACLE_SID mynewdb

$ORACLE_HOME/dbs/init.ora

$ SQLPLUS /nolog
CONNECT SYS/password AS SYSDBA

-- create the server parameter file 
CREATE SPFILE='/u01/oracle/dbs/spfilemynewdb.ora' FROM
       PFILE='/u01/oracle/admin/initmynewdb/scripts/init.ora';
SHUTDOWN 
-- the next startup will use the server parameter file
EXIT

STARTUP NOMOUNT

CREATE DATABASE mynewdb
   USER SYS IDENTIFIED BY pz6r58
   USER SYSTEM IDENTIFIED BY y1tz5p
   LOGFILE GROUP 1 ('/u01/oracle/oradata/mynewdb/redo01.log') SIZE 100M,
           GROUP 2 ('/u01/oracle/oradata/mynewdb/redo02.log') SIZE 100M,
           GROUP 3 ('/u01/oracle/oradata/mynewdb/redo03.log') SIZE 100M
   MAXLOGFILES 5
   MAXLOGMEMBERS 5
   MAXLOGHISTORY 1
   MAXDATAFILES 100
   MAXINSTANCES 1
   CHARACTER SET US7ASCII
   NATIONAL CHARACTER SET AL16UTF16
   DATAFILE '/u01/oracle/oradata/mynewdb/system01.dbf' SIZE 325M REUSE
   EXTENT MANAGEMENT LOCAL
   SYSAUX DATAFILE '/u01/oracle/oradata/mynewdb/sysaux01.dbf' SIZE 325M REUSE
   DEFAULT TABLESPACE tbs_1
   DEFAULT TEMPORARY TABLESPACE tempts1
      TEMPFILE '/u01/oracle/oradata/mynewdb/temp01.dbf' 
      SIZE 20M REUSE
   UNDO TABLESPACE undotbs 
      DATAFILE '/u01/oracle/oradata/mynewdb/undotbs01.dbf'
      SIZE 200M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED;

CONNECT SYS/password AS SYSDBA
-- create a user tablespace to be assigned as the default tablespace for users
CREATE TABLESPACE users LOGGING 
     DATAFILE '/u01/oracle/oradata/mynewdb/users01.dbf' 
     SIZE 25M REUSE AUTOEXTEND ON NEXT  1280K MAXSIZE UNLIMITED 
     EXTENT MANAGEMENT LOCAL;
-- create a tablespace for indexes, separate from user tablespace
CREATE TABLESPACE indx LOGGING 
     DATAFILE '/u01/oracle/oradata/mynewdb/indx01.dbf' 
     SIZE 25M REUSE AUTOEXTEND ON NEXT  1280K MAXSIZE UNLIMITED 
     EXTENT MANAGEMENT LOCAL;

CONNECT SYS/password AS SYSDBA
@/u01/oracle/rdbms/admin/catalog.sql
@/u01/oracle/rdbms/admin/catproc.sql
EXIT

Protecting Your Database: Specifying Passwords for Users SYS and SYSTEM

The clauses of the CREATE DATABASE statement used for specifying the passwords for users SYS and SYSTEM are:

• USER SYS IDENTIFIED BY password

• USER SYSTEM IDENTIFIED BY password

If you omit these clauses, these users are assigned the default passwords change_on_install and manager, respectively. A record is written to the alert log indicating that the default passwords were used. To protect your database, you should change these passwords using the ALTER USER statement immediately after database creation.

Oracle strongly recommends that you specify these clauses, even though they are optional in this release of Oracle Database. The default passwords are commonly known, and if you neglect to change them later, you leave database vulnerable to attack by malicious users.

Creating a Locally Managed SYSTEM Tablespace

Specify the EXTENT MANAGEMENT LOCAL clause in the CREATE DATABASE statement to create a locally managed SYSTEM tablespace. The COMPATIBLE initialization parameter must be set to 9.2 or higher for this statement to be successful. If you do not specify the EXTENT MANAGEMENT LOCAL clause, by default the database creates a dictionary-managed SYSTEM tablespace. Dictionary-managed tablespaces are deprecated.

A locally managed SYSTEM tablespace has AUTOALLOCATE enabled by default, which means that the system determines and controls the number and size of extents. You may notice an increase in the initial size of objects created in a locally managed SYSTEM tablespace because of the autoallocate policy. It is not possible to create a locally managed SYSTEM tablespace and specify UNIFORM extent size. xx Is UNIFORM extent size something we should remove from the doc?

When you create your database with a locally managed SYSTEM tablespace, ensure that the following conditions are met:

• A default temporary tablespace must exist, and that tablespace cannot be the SYSTEM tablespace.

  To meet this condition, you can specify the DEFAULT TEMPORARY TABLESPACE clause in the CREATE DATABASE statement, or you can omit the clause and let Oracle Database create the tablespace for you using a default name and in a default location.

• You can include the UNDO TABLESPACE clause in the CREATE DATABASE statement to create a specific undo tablespace. If you omit that clause, Oracle Database creates a locally managed undo tablespace for you using the default name and in a default location.

Creating the SYSAUX Tablespace

The SYSAUX tablespace is always created at database creation. The SYSAUX tablespace serves as an auxiliary tablespace to the SYSTEM tablespace. Because it is the default tablespace for many Oracle Database features and products that previously required their own tablespaces, it reduces the number of tablespaces required by the database and that you must maintain. Other functionality or features that previously used the SYSTEM tablespace can now use the SYSAUX tablespace, thus reducing the load on the SYSTEM tablespace.

You can specify only datafile attributes for the SYSAUX tablespace, using the SYSAUX DATAFILE clause in the CREATE DATABASE statement. Mandatory attributes of the SYSAUX tablespace are set by Oracle Database and include:

• PERMANENT

• READ WRITE

• EXTENT MANAGMENT LOCAL

• SEGMENT SPACE MANAGMENT AUTO

You cannot alter these attributes with an ALTER TABLESPACE statement, and any attempt to do so will result in an error. You cannot drop or rename the SYSAUX tablespace.

The size of the SYSAUX tablespace is determined by the size of the database components that occupy SYSAUX. See Table 2-2 for a list of all SYSAUX occupants. Based on the initial sizes of these components, the SYSAUX tablespace needs to be at least 240 MB at the time of database creation. The space requirements of the SYSAUX tablespace will increase after the database is fully deployed, depending on the nature of its use and workload. For more information on how to manage the space consumption of the SYSAUX tablespace on an ongoing basis, please refer to the "Managing the SYSAUX Tablespace".

If you include a DATAFILE clause for the SYSTEM tablespace, then you must specify the SYSAUX DATAFILE clause as well, or the CREATE DATABASE statement will fail. This requirement does not exist if the Oracle-managed files feature is enabled (see "Specifying Oracle-Managed Files at Database Creation").

If you issue the CREATE DATABASE statement with no other clauses, then the software creates a default database with datafiles for the SYSTEM and SYSAUX tablespaces stored in system-determined default locations, or where specified by an Oracle-managed files initialization parameter.

The SYSAUX tablespace has the same security attributes as the SYSTEM tablespace.

Table 2-2 lists the components that use the SYSAUX tablespace as their default tablespace during installation, and the tablespace in which they were stored in earlier releases:

The installation procedures for these components provide the means of establishing their occupancy of the SYSAUX tablespace.

Using Automatic Undo Management: Creating an Undo Tablespace

Automatic undo management uses an undo tablespace.To enable automatic undo management, set the UNDO_MANAGEMENT initialization parameter to AUTO in your initialization parameter file. In this mode, undo data is stored in an undo tablespace and is managed by Oracle Database. If you want to define and name the undo tablespace yourself, you must also include the UNDO TABLESPACE clause in the CREATE DATABASE statement at database creation time. If you omit this clause, and automatic undo management is enabled (by setting the UNDO_MANAGEMENT initialization parameter to AUTO), the database creates a default undo tablespace named SYS_UNDOTBS.

Creating a Default Permanent Tablespace

The DEFAULT TABLESPACE clause of the CREATE DATABASE statement specifies a default permanent tablespace for the database. Oracle Database assigns to this tablespace any non-SYSTEM users for whom you do not explicitly specify a different permanent tablespace. If you do not specify this clause, then the SYSTEM tablespace is the default permanent tablespace for non-SYSTEM users. Oracle strongly recommends that you create a default permanent tablespace.

Creating a Default Temporary Tablespace

The DEFAULT TEMPORARY TABLESPACE clause of the CREATE DATABASE statement creates a default temporary tablespace for the database. Oracle Database assigns this tablespace as the temporary tablespace for users who are not explicitly assigned a temporary tablespace.

You can explicitly assign a temporary tablespace or tablespace group to a user in the CREATE USER statement. However, if you do not do so, and if no default temporary tablespace has been specified for the database, then by default these users are assigned the SYSTEM tablespace as their temporary tablespace. It is not good practice to store temporary data in the SYSTEM tablespace, and it is cumbersome to assign every user a temporary tablespace individually. Therefore, Oracle recommends that you use the DEFAULT TEMPORARY TABLESPACE clause of CREATE DATABASE.

You can add or change the default temporary tablespace after database creation. You do this by creating a new temporary tablespace or tablespace group with a CREATE TEMPORARY TABLESPACE statement, and then assign it as the temporary tablespace using the ALTER DATABASE DEFAULT TEMPORARY TABLESPACE statement. Users will automatically be switched (or assigned) to the new default temporary tablespace.

The following statement assigns a new default temporary tablespace:

ALTER DATABASE DEFAULT TEMPORARY TABLESPACE tempts2;

The new default temporary tablespace must already exist. When using a locally managed SYSTEM tablespace, the new default temporary tablespace must also be locally managed.

You cannot drop or take offline a default temporary tablespace, but you can assign a new default temporary tablespace and then drop or take offline the former one. You cannot change a default temporary tablespace to a permanent tablespace.

Users can obtain the name of the current default temporary tablespace by querying the PROPERTY_NAME and PROPERTY_VALUE columns of the DATABASE_PROPERTIES view. These columns contain the values "DEFAULT_TEMP_TABLESPACE" and the default temporary tablespace name, respectively.

Specifying Oracle-Managed Files at Database Creation

You can minimize the number of clauses and parameters that you specify in your CREATE DATABASE statement by using the Oracle-managed files feature. You do this either by specifying a directory in which your files are created and managed by Oracle Database, or by using Automatic Storage Management. When you use Automatic Storage Management, you specify a disk group in which the database creates and manages your files, including file redundancy and striping.

By including any of the initialization parameters DB_CREATE_FILE_DEST, DB_CREATE_ONLINE_LOG_DEST_n, or DB_RECOVERY_FILE_DEST in your initialization parameter file, you instruct Oracle Database to create and manage the underlying operating system files of your database. Oracle Database will automatically create and manage the operating system files for the following database structures, depending on which initialization parameters you specify and how you specify clauses in your CREATE DATABASE statement:

• Tablespaces

• Temporary tablespaces

• Control files

• Redo log files

• Archive log files

• Flashback logs

• Block change tracking files

• RMAN backups

The following CREATE DATABASE statement shows briefly how the Oracle-managed files feature works, assuming you have specified required initialization parameters:

CREATE DATABASE rbdb1
     USER SYS IDENTIFIED BY pz6r58
     USER SYSTEM IDENTIFIED BY y1tz5p
     UNDO TABLESPACE undotbs
     DEFAULT TEMPORARY TABLESPACE tempts1;

• No DATAFILE clause is specified, so the database creates an Oracle-managed datafile for the SYSTEM tablespace.

• No LOGFILE clauses are included, so the database creates two Oracle-managed redo log file groups.

• No SYSAUX DATAFILE is included, so the database creates an Oracle-managed datafile for the SYSAUX tablespace.

• No DATAFILE subclause is specified for the UNDO TABLESPACE clause, so the database creates an Oracle-managed datafile for the undo tablespace.

• No TEMPFILE subclause is specified for the DEFAULT TEMPORARY TABLESPACE clause, so the database creates an Oracle-managed tempfile.

• If no CONTROL_FILES initialization parameter is specified in the initialization parameter file, then the database also creates an Oracle-managed control file.

• If you are using a server parameter file (see "Managing Initialization Parameters Using a Server Parameter File"), the database automatically sets the appropriate initialization parameters.

  
  

  See Also: Chapter 11, "Using Oracle-Managed Files", for information about the Oracle-managed files feature and how to use it Chapter 12, "Using Automatic Storage Management", for information about Automatic Storage Management

  
  

Supporting Bigfile Tablespaces During Database Creation

Oracle Database simplifies management of tablespaces and enables support for ultra-large databases by letting you create bigfile tablespaces. Bigfile tablespaces can contain only one file, but that file can have up to 4G blocks. The maximum number of datafiles in an Oracle Database is limited (usually to 64K files). Therefore, bigfile tablespaces can significantly enhance the storage capacity of an Oracle Database.

This section discusses the clauses of the CREATE DATABASE statement that let you include support for bigfile tablespaces.

CREATE DATABASE rbdb1
     USER SYS IDENTIFIED BY pz6r58
     USER SYSTEM IDENTIFIED BY y1tz5p
     SET DEFAULT BIGFILE TABLESPACE
     UNDO TABLESPACE undotbs
     DEFAULT TEMPORARY TABLESPACE tempts1;

ALTER DATABASE SET DEFAULT BIGFILE TABLESPACE;

SELECT PROPERTY_VALUE FROM DATABASE_PROPERTIES 
   WHERE PROPERTY_NAME = 'DEFAULT_TBS_TYPE';

CREATE DATABASE rbdb1
...
     BIGFILE UNDO TABLESPACE undotbs
        DATAFILE '/u01/oracle/oradata/mynewdb/undotbs01.dbf'
        SIZE 200M REUSE AUTOEXTEND ON MAXSIZE UNLIMITED;

CREATE DATABASE rbdb1
   SET DEFAULT BIGFILE TABLSPACE
...
     SMALLFILE DEFAULT TEMPORARY TABLESPACE tempts1
        TEMPFILE '/u01/oracle/oradata/mynewdb/temp01.dbf' 
        SIZE 20M REUSE
...

Specifying the Database Time Zone and Time Zone File

You can specify the database time zone and the supporting time zone file.

SELECT * FROM V$TIMEZONE_NAMES;

Specifying FORCE LOGGING Mode

Some data definition language statements (such as CREATE TABLE) allow the NOLOGGING clause, which causes some database operations not to generate redo records in the database redo log. The NOLOGGING setting can speed up operations that can be easily recovered outside of the database recovery mechanisms, but it can negatively affect media recovery and standby databases.

Oracle Database lets you force the writing of redo records even when NOLOGGING has been specified in DDL statements. The database never generates redo records for temporary tablespaces and temporary segments, so forced logging has no affect for objects.

ALTER DATABASE NO FORCE LOGGING;

Determining the Global Database Name

The global database name consists of the user-specified local database name and the location of the database within a network structure. The DB_NAME initialization parameter determines the local name component of the database name, and the DB_DOMAIN parameter indicates the domain (logical location) within a network structure. The combination of the settings for these two parameters must form a database name that is unique within a network.

For example, to create a database with a global database name of test.us.acme.com, edit the parameters of the new parameter file as follows:

DB_NAME = test
DB_DOMAIN = us.acme.com

You can rename the GLOBAL_NAME of your database using the ALTER DATABASE RENAME GLOBAL_NAME statement. However, you must also shut down and restart the database after first changing the DB_NAME and DB_DOMAIN initialization parameters and re-creating the control file.

Specifying a Flash Recovery Area

A flash recovery area is a location in which Oracle Database can store and manage files related to backup and recovery. It is distinct from the database area, which is a location for the Oracle-managed current database files (datafiles, control files, and online redo logs).

You specify a flash recovery area with the following initialization parameters:

• DB_RECOVERY_FILE_DEST: Location of the flash recovery area. This can be a directory, file system, or Automatic Storage Management (ASM) disk group. It cannot be a raw file system.

  In a RAC environment, this location must be on a cluster file system, ASM disk group, or a shared directory configured through NFS.

• DB_RECOVERY_FILE_DEST_SIZE: Specifies the maximum total bytes to be used by the flash recovery area. This initialization parameter must be specified before DB_RECOVERY_FILE_DEST is enabled.

In a RAC environment, the settings for these two parameters must be the same on all instances.

You cannot enable these parameters if you have set values for the LOG_ARCHIVE_DEST and LOG_ARCHIVE_DUPLEX_DEST parameters. You must disable those parameters before setting up the flash recovery area. You can instead set values for the LOG_ARCHIVE_DEST_n parameters. If you do not set values for local LOG_ARCHIVE_DEST_n, then setting up the flash recovery area will implicitly set LOG_ARCHIVE_DEST_10 to the flash recovery area.

Oracle recommends using a flash recovery area, because it can simplify backup and recovery operations for your database.

Specifying Control Files

The CONTROL_FILES initialization parameter specifies one or more control filenames for the database. When you execute the CREATE DATABASE statement, the control files listed in the CONTROL_FILES parameter are created.

If you do not include CONTROL_FILES in the initialization parameter file, then Oracle Database creates a control file using a default operating system dependent filename or, if you have enabled Oracle-managed files, creates Oracle-managed control files.

If you want the database to create new operating system files when creating database control files, the filenames listed in the CONTROL_FILES parameter must not match any filenames that currently exist on your system. If you want the database to reuse or overwrite existing files when creating database control files, ensure that the filenames listed in the CONTROL_FILES parameter match the filenames that are to be reused.

Oracle strongly recommends you use at least two control files stored on separate physical disk drives for each database.

Specifying Database Block Sizes

The DB_BLOCK_SIZE initialization parameter specifies the standard block size for the database. This block size is used for the SYSTEM tablespace and by default in other tablespaces. Oracle Database can support up to four additional nonstandard block sizes.

DB_BLOCK_SIZE=4096

Managing the System Global Area (SGA)

This section discusses the initialization parameters that affect the amount of memory allocated to the System Global Area (SGA). Except for the SGA_MAX_SIZE initialization parameter, they are dynamic parameters whose values can be changed by the ALTER SYSTEM statement. The size of the SGA is dynamic, and can grow or shrink by dynamically altering these parameters.

This section contains the following topics:

• Components and Granules in the SGA

• Limiting the Size of the SGA

• Using Automatic Shared Memory Management

• Setting the Buffer Cache Initialization Parameters

• Using Manual Shared Memory Management

• Viewing Information About the SGA

  
  

  See Also: Oracle Database Performance Tuning Guide for information about tuning the components of the SGA Oracle Database Concepts for a conceptual discussion of automatic shared memory management

  
  

SELECT SUM(value) FROM V$SGA = 1200M
SELECT CURRENT_SIZE FROM V$SGA_DYNAMIC_FREE_MEMORY = 208M

ALTER SYSTEM SET SGA_TARGET = 992M;
ALTER SYSTEM SET SHARED_POOL_SIZE = 0;
ALTER SYSTEM SET LARGE_POOL_SIZE = 0;
ALTER SYSTEM SET JAVA_POOL_SIZE = 0;
ALTER SYSTEM SET DB_CACHE_SIZE = 0;
ALTER SYSTEM SET STREAMS_POOL_SIZE = 0;

DB_BLOCK_SIZE=4096

DB_CACHE_SIZE=12M
DB_2K_CACHE_SIZE=8M
DB_8K_CACHE_SIZE=4M

Specifying the Maximum Number of Processes

The PROCESSES initialization parameter determines the maximum number of operating system processes that can be connected to Oracle Database concurrently. The value of this parameter must be a minimum of one for each background process plus one for each user process. The number of background processes will vary according the database features that you are using. For example, if you are using Advanced Queuing or the file mapping feature, you will have additional background processes. If you are using Automatic Storage Management, then add three additional processes.

If you plan on running 50 user processes, a good estimate would be to set the PROCESSES initialization parameter to 70.

Specifying the Method of Undo Space Management

Every Oracle Database must have a method of maintaining information that is used to undo changes to the database. Such information consists of records of the actions of transactions, primarily before they are committed. Collectively these records are called undo data.This section provides instructions for setting up an environment for automatic undo management using an undo tablespace.

The COMPATIBLE Initialization Parameter and Irreversible Compatibility

The COMPATIBLE initialization parameter enables or disables the use of features in the database that affect file format on disk. For example, if you create an Oracle Database 10g database, but specify COMPATIBLE = 9.2.0.2 in the initialization parameter file, then features that requires 10.0 compatibility will generate an error if you try to use them. Such a database is said to be at the 9.2.0.2 compatibility level.

You can advance the compatibility level of your database. If you do advance the compatibility of your database with the COMPATIBLE initialization parameter, there is no way to start the database using a lower compatibility level setting, except by doing a point-in-time recovery to a time before the compatibility was advanced.

The default value for the COMPATIBLE parameter is the release number of the most recent major release.

Setting the License Parameter

If you use named user licensing, Oracle Database can help you enforce this form of licensing. You can set a limit on the number of users created in the database. Once this limit is reached, you cannot create more users.

To limit the number of users created in a database, set the LICENSE_MAX_USERS initialization parameter in the database initialization parameter file, as shown in the following example:

LICENSE_MAX_USERS = 200

What Is a Server Parameter File?

A server parameter file can be thought of as a repository for initialization parameters that is maintained on the machine running the Oracle Database server. It is, by design, a server-side initialization parameter file. Initialization parameters stored in a server parameter file are persistent, in that any changes made to the parameters while an instance is running can persist across instance shutdown and startup. This arrangement eliminates the need to manually update initialization parameters to make persistent any changes effected by ALTER SYSTEM statements. It also provides a basis for self-tuning by the Oracle Database server.

A server parameter file is initially built from a text initialization parameter file using the CREATE SPFILE statement. (It can also be created directly by the Database Configuration Assistant.) The server parameter file is a binary file that cannot be edited using a text editor. Oracle Database provides other interfaces for viewing and modifying parameter settings in a server parameter file.

When you issue a STARTUP command with no PFILE clause, the Oracle instance searches an operating system–specific default location for a server parameter file from which to read initialization parameter settings. If no server parameter file is found, the instance searches for a text initialization parameter file. If a server parameter file exists but you want to override it with settings in a text initialization parameter file, you must specify the PFILE clause when issuing the STARTUP command. Instructions for starting an instance using a server parameter file are contained in "Starting Up a Database".

Migrating to a Server Parameter File

If you are currently using a text initialization parameter file, use the following steps to migrate to a server parameter file.

1. If the initialization parameter file is located on a client machine, transfer the file (for example, FTP) from the client machine to the server machine.

   
   

   Note: If you are migrating to a server parameter file in an Oracle Real Application Clusters environment, you must combine all of your instance-specific initialization parameter files into a single initialization parameter file. Instructions for doing this, and other actions unique to using a server parameter file for instances that are part of an Oracle Real Application Clusters installation, are discussed in: Oracle Real Application Clusters Installation and Configuration Guide Oracle Real Application Clusters Administrator's Guide

   
   

2. Create a server parameter file using the CREATE SPFILE statement. This statement reads the initialization parameter file to create a server parameter file. The database does not have to be started to issue a CREATE SPFILE statement.

3. Start up the instance using the newly created server parameter file.

Creating a Server Parameter File

You use the CREATE SPFILE statement to create a server parameter file from a text initialization parameter file. You must have the SYSDBA or the SYSOPER system privilege to execute this statement.

The CREATE SPFILE statement can be executed before or after instance startup. However, if the instance has been started using a server parameter file, an error is raised if you attempt to re-create the same server parameter file that is currently being used by the instance.

The following example creates a server parameter file from initialization parameter file /u01/oracle/dbs/init.ora. In this example no SPFILE name is specified, so the file is created with the platform-specific default name and location shown in Table 2-5.

CREATE SPFILE FROM PFILE='/u01/oracle/dbs/init.ora';

Another example, which follows, illustrates creating a server parameter file and supplying a name.

CREATE SPFILE='/u01/oracle/dbs/test_spfile.ora'
       FROM PFILE='/u01/oracle/dbs/test_init.ora';

When you create a server parameter file from an initialization parameter file, comments specified on the same lines as a parameter setting in the initialization parameter file are maintained in the server parameter file. All other comments are ignored.

The server parameter file is always created on the machine running the database server. If a server parameter file of the same name already exists on the server, it is overwritten with the new information.

Oracle recommends that you allow the database server to default the name and location of the server parameter file. This will ease administration of your database. For example, the STARTUP command assumes this default location to read the parameter file. The table that follows shows the default name and location of the server parameter file. The table assumes that the SPFILE is a file. If it is a raw device, the default name could be a logical volume name or partition device name, and the default location could differ.

If you create a server parameter file in a location other than the default location, you must create a text initialization parameter file that points to the server parameter file. For more information, see "Starting Up a Database".

The SPFILE Initialization Parameter

The SPFILE initialization parameter contains the name of the current server parameter file. When the default server parameter file is used by the server (that is, you issue a STARTUP command and do not specify a PFILE), the value of SPFILE is internally set by the server. The SQL*Plus command SHOW PARAMETERS SPFILE (or any other method of querying the value of a parameter) displays the name of the server parameter file that is currently in use.

Using ALTER SYSTEM to Change Initialization Parameter Values

The ALTER SYSTEM statement lets you set, change, or restore to default the values of initialization parameter. If you are using a text initialization parameter file, the ALTER SYSTEM statement changes the value of a parameter only for the current instance, because there is no mechanism for automatically updating initialization parameters on disk. You must update them manually to be passed to a future instance. Using a server parameter file overcomes this limitation.

ALTER SYSTEM SET JOB_QUEUE_PROCESSES=50
                 COMMENT='temporary change on Nov 29'
                 SCOPE=MEMORY;

ALTER SYSTEM 
     SET LOG_ARCHIVE_DEST_4='LOCATION=/u02/oracle/rbdb1/',MANDATORY,'REOPEN=2'
         COMMENT='Add new destimation on Nov 29'
         SCOPE=SPFILE;

Exporting the Server Parameter File

You can use the CREATE PFILE statement to export a server parameter file to a text initialization parameter file. Doing so might be necessary for several reasons:

• For diagnostic purposes, listing all of the parameter values currently used by an instance. This is analogous to the SQL*Plus SHOW PARAMETERS command or selecting from the V$PARAMETER or V$PARAMETER2 views.

• To modify the &spfile;server parameter file by first exporting it, editing the resulting text file, and then re-creating it using the CREATE SPFILE statement

The exported file can also be used to start up an instance using the PFILE clause.

You must have the SYSDBA or the SYSOPER system privilege to execute the CREATE PFILE statement. The exported file is created on the database server machine. It contains any comments associated with the parameter in the same line as the parameter setting.

The following example creates a text initialization parameter file from the server parameter file:

CREATE PFILE FROM SPFILE;

Because no names were specified for the files, the database creates an initialization parameter file with a platform-specific name, and it is created from the platform-specific default server parameter file.

The following example creates a text initialization parameter file from a server parameter file, but in this example the names of the files are specified:

CREATE PFILE='/u01/oracle/dbs/test_init.ora'
       FROM SPFILE='/u01/oracle/dbs/test_spfile.ora';

Backing Up the Server Parameter File

You can create a backup of your server parameter file by exporting it, as described in "Exporting the Server Parameter File". If the backup and recovery strategy for your database is implemented using Recovery Manager (RMAN), then you can use RMAN to create a backup. The server parameter file is backed up automatically by RMAN when you back up your database, but RMAN also lets you specifically create a backup of the currently active server parameter file.

Errors and Recovery for the Server Parameter File

If an error occurs while reading the server parameter file (during startup or an export operation), or while writing the server parameter file during its creation, the operation terminates with an error reported to the user.

If an error occurs while reading or writing the server parameter file during a parameter update, the error is reported in the alert log and all subsequent parameter updates to the server parameter file are ignored. At this point, you can take one of the following actions:

• Shut down the instance, recover the server parameter file, and then restart the instance.

• Continue to run the database if you do not care that subsequent parameter updates will not be persistent.

Viewing Parameter Settings

You can view parameter settings in several ways, as shown in the following table.

Deploying Services

Installations configure Oracle Database 10g services in the database giving each service a unique global name, associated performance goals, and associated importance. The services are tightly integrated with the Oracle Database and are maintained in the data dictionary. You can find service information in the following service-specific views:

• DBA_SERVICES

• ALL_SERVICES or V$SERVICES

• V$ACTIVE_SERVICES

• V$SERVICE_STATS

• V$SERVICE_EVENTS

• V$SERVICE_WAIT_CLASSES

• V$SERV_MOD_ACT_STATS

• V$SERVICE_METRICS

• V$SERVICE_METRICS_HISTORY

The following additional views also contain some information about services:

• V$SESSION

• V$ACTIVE_SESSION_HISTORY

• DBA_RSRC_GROUP_MAPPINGS

• DBA_SCHEDULER_JOB_CLASSES

• DBA_THRESHOLDS

Several Oracle Database features support services. The Automatic Workload Repository (AWR) manages the performance of services. AWR records service performance, including execution times, wait classes, and resources consumed by service. AWR alerts warn when service response time thresholds are exceeded. The dynamic views report current service performance metrics with one hour of history. Each service has quality-of-service thresholds for response time and CPU consumption.

In addition, the Database Resource Manager maps services to consumer groups. This enables you to automatically manage the priority of one service relative to others. You can use consumer groups to define relative priority in terms of either ratios or resource consumption. This is described in more detail, for example, in Oracle Real Application Clusters Deployment and Performance Guide.

Configuring Services

Services describe applications, application functions, and data ranges as either functional services or data-dependent services. Functional services are the most common mapping of workloads. Sessions using a particular function are grouped together. For Oracle*Applications, ERP, CRM, and iSupport functions create a functional division of the work. For SAP, dialog and update functions create a functional division of the work.

In contrast, data-dependent routing routes sessions to services based on data keys. The mapping of work requests to services occurs in the object relational mapping layer for application servers and TP monitors. For example, in RAC, these ranges can be completely dynamic and based on demand because the database is shared.

You can also define preconnect application services in RAC databases. Preconnect services span instances to support a service in the event of a failure. The preconnect service supports TAF preconnect mode and is managed transparently when using RAC.

In addition to application services, Oracle Database also supports two internal services: SYS$BACKGROUND is used by the background processes only and SYS$USERS is the default service for user sessions that are not associated with services.

Use the DBMS_SERVICE package or set the SERVICE_NAMES parameter to create application services on a single-instance Oracle Database. You can later define the response time goal or importance of each service through EM, either individually or by using the Enterprise Manager feature "Copy Thresholds From a Baseline" on the Manage Metrics/Edit Threshold pages. You can also do this using PL/SQL.

Using Services

Using services requires no changes to your application code. Client-side work connects to a service. Server-side work specifies the service when creating the job class for the Job Scheduler and the database links for distributed databases. Work requests executing under a service inherit the performance thresholds for the service and are measured as part of the service.

Some Security Considerations

After the database is created, you can configure it to take advantage of Oracle Identity Management. For information on how to do this, please refer to Oracle Database Identity Management Integration Guide.

A newly created database has at least three user accounts that are important for administering your database: SYS, SYSTEM, and SYSMAN.

Additional administrative accounts are provided by Oracle Database that should be used only by authorized users. To protect these accounts from being used by unauthorized users familiar with their Oracle-supplied passwords, these accounts are initially locked with their passwords expired. As the database administrator, you are responsible for the unlocking and resetting of these accounts.

Table 2-6 lists the administrative accounts that are provided by Oracle Database. Not all accounts may be present on your system, depending upon the options that you selected for your database.

Enabling Transparent Data Encryption

Transparent data encryption is a feature that enables encryption of database columns before storing them in the datafile. If users attempt to circumvent the database access control mechanisms by looking inside datafiles directly with operating system tools, transparent data encryption prevents such users from viewing sensitive information.

Users who have the CREATE TABLE privilege can choose one or more columns in a table to be encrypted. The data is encrypted in the data files and in the audit logs (if audit is turned on). Database users with appropriate privileges can view the data in unencrypted format. For information on enabling and disabling transparent data encryption, see Oracle Database Security Guide

Creating a Secure External Password Store

For large-scale deployments where applications use password credentials to connect to databases, it is possible to store such credentials in a client-side Oracle wallet. An Oracle wallet is a secure software container that is used to store authentication and signing credentials.

Storing database password credentials in a client-side Oracle wallet eliminates the need to embed usernames and passwords in application code, batch jobs, or scripts. This reduces the risk of exposing passwords in the clear in scripts and application code, and simplifies maintenance because you need not change your code each time usernames and passwords change. In addition, not having to change application code also makes it easier to enforce password management policies for these user accounts.

When you configure a client to use the external password store, applications can use the following syntax to connect to databases that use password authentication:

CONNECT /@database_alias

Note that you need not specify database login credentials in this CONNECT statement. Instead your system looks for database login credentials in the client wallet.

Installing the Oracle Database Sample Schemas

The Oracle Database distribution media includes various SQL files that let you experiment with the system, learn SQL, or create additional tables, views, or synonyms.

Oracle Database includes sample schemas that help you to become familiar with Oracle Database functionality. All Oracle Database documentation and training materials are being converted to the Sample Schemas environment as those materials are updated.

The Sample Schemas can be installed automatically by the Database Configuration Assistant, or you can install them manually. The schemas and installation instructions are described in detail in Oracle Database Sample Schemas.