[SunRay-Users] Direct Attached Printing UTTSC

[Paul Kasper]

The overall printer setup process should be described here:

http://wikis.sun.com/display/SRWC2dot2/Task+Map+-+Managing+Printers

If there is any missing information or the current information needs
to be made more clear, please leave a comment.

Thanks,
Paul

Craig Bender wrote:
> You need to setup a raw queue on the Solaris side for mapping the printers.
> 
> /usr/sbin/lpadmin -p <printer-name> -v \
> /tmp/SUNWut/units/IEEE802.<mac-address>/dev/printers/<device node>
> 
> 
> Jacob Grundmeier wrote:
>> This is an example on the non laser printer that has been tried.
>>
>> /opt/SUNWuttsc/bin/uttsc -g 1200x960 -A 24 -r printer:HP6122 -T 
>> WindowsXP_VM_Printer 10.25.53.92
>> /opt/SUNWuttsc/bin/uttsc -g 1200x960 -A 24 -r printer:HP6122="hp 
>> deskjet 6122 series" -T WindowsXP_VM_Printer 10.25.53.92
>>
>> Here's how it's configured:
>>
>> Banner: on
>>> Content types: postscript
>>> Device: 
>>> /tmp/SUNWut/units/IEEE802.00144fe7adce/dev/printers/hpMY3842B1CB66
>>> Interface: /usr/lib/lp/model/standard_foomatic
>>> Printer type: unknown
>>> Modules:
>>> Options:
>>> PPD:
>>  /usr/lib/lp/model/ppd/system/foomatic/HP/HP-DeskJet_6122-hpijs.ppd.g
>>
>>
>> This particular printer will print PS junk. I'm assuming this might be 
>> a driver issue because it prints in Solaris. The printer is a 
>> non-laser printer.
>>
>> The lasers I've tried were an HP and a Lexmark(again don't remember 
>> the models but they both supported PS). For those I set the cue up in 
>> Solaris with no PS filter so that everything going to the printer 
>> should be raw. With those, printing from Solaris worked just fine but 
>> when I sent it to Windows I got an error when trying to print.
>>
>> I apologize for not having specifics but it's been a while since I've 
>> run into this and just recently I've been asked about this again, but 
>> in a more general sense. So if this isn't specific enough I might have 
>> to wait until I get more details to give.
>>
>> Jake
>> ------------------------------------------------------------------------
>>
>>
>> How are you setting up the queue and what options are you passing to 
>> uttsc?
>>
>> Jacob Grundmeier wrote:
>>  > I've have been trying to get several direct attached printers to 
>> work with the uttsc. So far I've been unsuccessful. Does anybody have 
>> any known printers or printer configurations that work? I don't have 
>> any specific models that I have tried except that they were all laser 
>> printers except one. Also, I've got all of them to work with Solaris 
>> directly attached but again not with uttsc.
>>  >
>>  > Thanks
>>  > Jake
>>  >
>>  >
>>  > 
>> ------------------------------------------------------------------------
>>  >
>>  > _______________________________________________
>>  > SunRay-Users mailing list
>>  > SunRay-Users at filibeto.org <mailto:SunRay-Users at filibeto.org>
>>>  http://www.filibeto.org/mailman/listinfo/sunray-users
>> _______________________________________________
>> SunRay-Users mailing list
>> SunRay-Users at filibeto.org <mailto:SunRay-Users at filibeto.org>
>> http://www.filibeto.org/mailman/listinfo/sunray-users
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> SunRay-Users mailing list
>> SunRay-Users at filibeto.org
>> http://www.filibeto.org/mailman/listinfo/sunray-users
> _______________________________________________
> SunRay-Users mailing list
> SunRay-Users at filibeto.org
> http://www.filibeto.org/mailman/listinfo/sunray-users

-- 
Paul Kasper | Documentation Lead | paul.kasper at sun.com | x51546
                   Desktop Virtualization Products