[SunRay-Users] Remote Sunray DTU

alanboon at nets.com.sg alanboon at nets.com.sg
Mon Jan 21 10:15:45 EET 2008




> alanboon at nets.com.sg wrote:
>
> >utquery on the remote DTU came back with this:
> >bash-3.00# ./utquery -d 192.168.52.100
> >terminalID=00144f7cd829
> >        terminalIPA=192.168.52.100
> >        model=SunRayP8
> >        Subnet=255.255.255.0
> >        LeaseTim=86400
> >        DHCPServer=192.168.52.3
> >        INFORMServer=192.168.52.3
> It is getting DHCPINFORM from 192.168.52.3 server ,
> where as your actual firmware server is 192.168.16.21.
> Make sure your DTU receives the DHCPINFORM response
> from 192.168.16.21 or pass tftpSrvr value as 192.168.16.21
> in your DHCP server 192.168.52.3.
At least this part is working and it allows the DTU to connect to
the Sunray server and the user to the virtual desktop.


> >        tftpSrvr=ˬ
> The above "A" value doesn't help anyway unless you have the
> server name with "A" and also pass DNS parameters through
> your DHCP server that resolves the name A.
I didn't configure the router to pass " tftpSrvr=ˬ".
I used "option 66 ip 192.168.16.21".
Or I should use "option 66 ip SRSS" and then put
"ip host SRSS 192.168.16.21"?

Should I remove option 23, 31 & 35?


>
> Thanks
> P.S.M.Swamiji
>
> Note:These are my personal opinions,nothing to do with my employer
>
> >        currentAuth=192.168.16.22
> >        currentFW=MfgPkg_4.15_2006.07.20.16.57
> >        currentBarrier=310
> >        currentBarrierLevel=310
> >        AltAuth=192.168.16.21,192.168.16.22,192.168.16.23
> >bash-3.00#
> >
> >Is that a way to push firmware to specific DTU?
> >
> >Do I need to add "./utfwadm -A -f /opt/SUNWut/lib/firmware -n e1000g0 -N
> >192.168.52.0 -V"?
> >
> >Thanks.
> >
> >
> >sunray-users-bounces at filibeto.org wrote on 18/01/2008 14:42:37:
> >
> >
> >
> >>Hi,
> >>
> >>We are setting up a new remote office and are testing Sunray DTU
> >>connection.
> >>We managed to get the remote DTU to connect to our central SRSS i.e. I
> >>
> >>
> >can
> >
> >
> >>see
> >>the Insert Card OSD.
> >>
> >>However, the DTU is not pulling the new firmware.
> >>
> >>I have used "./utadm -A <new VLAN> " to register the new subnet.
> >>And ./utadm -l shows:
> >>bash-3.00# ./utadm -l
> >>LAN connections: On
> >>Subnetwork: 192.168.16.0                  <pri site>
> >>        Netmask=        255.255.255.0
> >>        Broadcast=      192.168.16.255
> >>        Router=         192.168.16.1
> >>        AuthSrvr=       192.168.16.21     <pri server>
> >>        AltAuth=        192.168.16.21 255.255.255.255
> >>        FirmwareSrvr=   192.168.16.21
> >>        NewTver=        4.0_127553-01_2007.11.09.17.41
> >>        IP assignment=  22/50 (192.168.16.201)
> >>Subnetwork: 192.168.52.0                  <remote site>
> >>        Netmask=        255.255.255.0
> >>        AuthSrvr=       192.168.16.21
> >>        AltAuth=        192.168.16.21 255.255.255.255
> >>        FirmwareSrvr=   192.168.16.21
> >>        NewTver=        4.0_127553-01_2007.11.09.17.41
> >>bash-3.00#
> >>
> >>And we have added the following settings to our router (acting as DHCP
> >>servers):
> >>option 49 ip 192.168.16.21 192.168.16.22 192.168.16.23
> >>option 35 ip 192.168.16.21 192.168.16.22 192.168.16.23
> >>option 23 ascii "4.0_127553-01_2007.11.09.17.41"
> >>option 31 ip 192.168.16.21
> >>option 66 ip 192.168.16.21
> >>
> >>When the DTU starts up, it will cycle through 192.168.16.21 to 23, and
> >>eventually connects to one of them. But it is not downloading the new
> >>firmware 4.0_127553-01_2007.11.09.17.41
> >>
> >>Firewall rules are relaxed at the moment, but I do not see TFTP packets
> >>passing around.
> >>
> >>Any other idea what is wrong?
> >>
> >>Thanks for the advice and help.
> >>
> >>Regards,
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
>
>********************************************************************************

> >
> >
> >
> >>IMPORTANT NOTICE:  This email and any files transmitted with  it is
> >>intended only for  the use of the person(s) to whom it is addressed,
and
> >>may  contain information that is privileged, confidential and exempt
from
> >>disclosure under applicable law. If you are not the intended recipient,
> >>please immediately notify the sender and delete  the email. Thank you.
> >>
> >>
> >>
>
>********************************************************************************

> >
> >
> >
> >>_______________________________________________
> >>SunRay-Users mailing list
> >>SunRay-Users at filibeto.org
> >>http://www.filibeto.org/mailman/listinfo/sunray-users
> >>
> >>
> >
> >
> >
>
>***************************************************************************

> >
> >
> >>  IMPORTANT NOTICE:
> >>This email and any files transmitted with it is intended only for
> >>the use of the person(s) to whom it is addressed, and may
> >>contain information that is privileged, confidential and exempt
> >>from disclosure under applicable law. If you are not the intended
> >>recipient, please immediately notify the sender and delete
> >>the email. Thank you.
> >>
> >>
> >>
>
>***************************************************************************

> >
> >
> >
>
>********************************************************************************

> >
> >IMPORTANT NOTICE:  This email and any files transmitted with  it is
> >intended only for  the use of the person(s) to whom it is addressed,
and
> >may  contain information that is privileged, confidential and exempt
from
> >disclosure under applicable law. If you are not the intended recipient,
> >please immediately notify the sender and delete  the email. Thank you.
>
>********************************************************************************

> >
> >
> >_______________________________________________
> >SunRay-Users mailing list
> >SunRay-Users at filibeto.org
> >http://www.filibeto.org/mailman/listinfo/sunray-users
> >
> >
>
> _______________________________________________
> SunRay-Users mailing list
> SunRay-Users at filibeto.org
> http://www.filibeto.org/mailman/listinfo/sunray-users

>
***************************************************************************
>   IMPORTANT NOTICE:
> This email and any files transmitted with it is intended only for
> the use of the person(s) to whom it is addressed, and may
> contain information that is privileged, confidential and exempt
> from disclosure under applicable law. If you are not the intended
> recipient, please immediately notify the sender and delete
> the email. Thank you.
>
***************************************************************************



********************************************************************************

IMPORTANT NOTICE:  This email and any files transmitted with  it is
intended only for  the use of the person(s) to whom it is addressed,  and
may  contain information that is privileged, confidential and exempt from
disclosure under applicable law. If you are not the intended recipient,
please immediately notify the sender and delete  the email. Thank you.
********************************************************************************




More information about the SunRay-Users mailing list